All Products

SKU: AF-2542

The Adafruit FONA 808 combines 2G cellular connectivity with integrated GPS tracking in a compact 1.75 × 1.6-inch breakout. Built around the SIM808 module with an MT3337 GPS chipset, it provides voice calling, SMS, GPRS data, and GPS geolocation — all controlled over a single serial port via AT c...

SKU: AF-3848

An isolated Power over Ethernet (PoE) module that extracts power from the Ethernet cable's centre taps and outputs a regulated 5 V at up to 1.8 A. The built-in isolation transformer ensures there is no direct electrical connection between the Ethernet side and the 5 V output — important for safet...

SKU: DF-DFR0884

This dual-USB step-down buck converter accepts 8–32V DC input and delivers a regulated 5V output at up to 3A across two USB Type-A ports simultaneously. With over 85% conversion efficiency and built-in reverse-connection and overload protection, it provides a compact and reliable way to power USB...

SKU: AF-2341

The Adafruit Audio FX Mini Sound Board is a standalone audio trigger that plays WAV and OGG Vorbis files — no Arduino or programming required. Simply drag and drop sound files over USB, wire up buttons to the trigger pins, and you're ready to go. With 16 MB of built-in flash storage, it holds app...

SKU: AF-1966

These earbud headphones with a built-in microphone are a handy accessory for microcontroller projects that use a TRRS audio jack, such as the Adafruit FONA cellular module. They also work with any iOS or Android device that uses a standard 4-pole TRRS pinout. Key Features TRRS Connector – Stan...

SKU: AF-3242

The Feather 32u4 Bluefruit LE with Stacking Headers combines an ATmega32u4 microcontroller with a Bluetooth Low Energy module, USB connectivity, and LiPo battery charging — with stacking headers pre-soldered so you can plug into a breadboard and stack FeatherWings on top. The Bluefruit module is...

SKU: AF-3379

The Feather 32u4 Bluefruit LE with Headers combines an ATmega32u4 microcontroller with a Bluetooth Low Energy module, USB connectivity, and LiPo battery charging — with standard headers pre-soldered so you can plug straight into a breadboard. The Bluefruit module is built on the Nordic nRF51822 ...

SKU: AF-1935

That's one tiny microphone! At about the size of a mature aphid, this wired Electret Microphone is perfect for your FONA. This microphone's very similar to our PCB-mount Elecret Microphone but is significantly smaller and has pre-attached 65mm long wires.  We don't have a specific datash...

SKU: AF-2461

Wow that's a tiny GPS antenna! This passive antenna is only 15mm x 15mm x 6.8mm in size, with a 50mm long uFL cable. Great for when you want to keep things small. Comes with a standard uFL connector on the end. Perfect for our FONA 808! Not good for our Ultimate GPS breakouts/shields/hat as t...

SKU: LB-PT91059-R

These red flexible LED filament bulbs are perfect for creating unique lighting effects. With a length of 130mm, they provide plenty of light while still being easy to manoeuvre. These bulbs operate on 3 volts, making them ideal for use in a variety of lighting applications.Power:0.06WForward Volt...

SKU: PR-PIM373

The VL53L1X Time of Flight sensor breakout uses a low-power laser to measure distances with excellent accuracy and speed. With a detection range of 4 cm to 4 metres and up to 50 Hz sampling frequency, it's ideal for proximity sensing, presence detection, and collision avoidance on robots. This b...

SKU: AF-2795

The Feather 32u4 Adalogger is an all-in-one datalogger built around the ATmega32u4, with a built-in MicroSD card holder, USB connectivity, and LiPo battery charging. Ready to log data straight out of the box — just add a MicroSD card and start recording. The ATmega32u4 runs at 8 MHz with 3.3V lo...

SKU: AF-1991

That's one slim cellular antenna! At just 75mm long from tip to tip and and with a thickness of just 2mm, this 3dBi GSM antenna is slim, compact and sensitive, with a 3dBi gain.  The antenna juts out from its base with stick-on back so you attach it to an enclosure if you're mak...

SKU: AF-2185

This is your standard USB A-Plug to Micro-USB cable. It's 2 meters long so you'll have plenty of cord to work with for those longer extensions. Perfect for connecting to your Raspberry Pi, Arduino Leonardo/Micro, FONA or Trinket (among other things). It's got extra beefy 24 AWG ...

SKU: EC-RPA32311R

A high-precision real-time clock (RTC) module based on the DS3231 IC, designed to plug directly into a Raspberry Pi B+ (and compatible with Arduino). The DS3231 maintains accurate timekeeping with ±5 ppm accuracy (±0.432 seconds per day) across −40 °C to +85 °C, and includes a coin cell battery b...

SKU: SF-COM-18732 · MPN: COM-18732

When your system needs a stable 12V rail from a variable DC supply, this industrial-grade buck-boost converter is built to deliver. It accepts a wide 8 to 36VDC input range and regulates it to 12V for loads up to 6A, or 72W.The buck-boost design automatically switches between stepping voltage dow...

SKU: AF-2841 · MPN: ADA2841

Add individually addressable RGB plus white lighting to your project with this flexible NeoPixel strip. Each pixel combines red, green, blue and white elements, giving you colourful effects plus a dedicated white channel for brighter white tones.This version is a 1 metre strip with 60 LEDs per me...

SKU: AF-3431

A button is a button, and a switch is a switch, but these translucent arcade buttons are in a class of their own. Particularly because they have LEDs built right in! That's right, you'll be button-mashing amidst a wash of beautiful light with these lil' guys. They're the same size as comm...

SKU: EC-WHC0011RF

The HC-11 is a low-cost, high-performance FSK transceiver module operating at 434 MHz, designed for transparent wireless serial communication. With a UART/TTL interface, it handles all RF protocol processing internally — simply send serial data in and it appears wirelessly at the receiving module...

SKU: AF-6194 · MPN: ADA6194

A warm-white LED filament shaped as the letter "D", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...