All Products

SKU: PI-PYC004

The Pycom Expansion Board 2.0 is a base board for Pycom development modules, providing USB connectivity, LiPo battery charging, a microSD card slot, and easy access to all module pins. It is compatible with the WiPy 2.0, LoPy, SiPy, FiPy, and GPy. Power the board via USB or a LiPo battery connec...

SKU: DF-DFR1236 · MPN: DFR1236

This development kit combines the FireBeetle 2 ESP32-C5 microcontroller board with a dedicated solderless IO expansion shield, giving you a practical platform for smart home and IoT prototypes.The ESP32-C5 brings dual-band Wi-Fi 6 on 2.4 GHz and 5 GHz, plus Bluetooth 5, Thread and Zigbee support....

SKU: EC-AMC01017B

The A9G development board is a compact IoT module combining GPRS/GSM cellular connectivity with GPS/BDS dual-mode positioning. Based on the A9G module, it supports voice calls, SMS, GPRS data networking, and real-time location tracking — all on a single board. Packed with peripherals including a...

SKU: PI-PYC006

The Pycom Pysense is a sensor-packed expansion shield that fits all Pycom multi-network modules — including the WiPy, SiPy, and LoPy. It gives you a head start on IoT projects by combining five sensors, a LiPo charger, micro-SD card slot, and USB serial access in one compact board. With ultra-lo...

SKU: WS-30619 · MPN: 30619

The Luckfox Pico Pi is a compact Linux micro development board powered by the Luckfox Core1106 processor. With 8 GB eMMC on-board storage, built-in Wi-Fi 6, Bluetooth 5.2/BLE, and a self-developed ISP3.2 image signal processor supporting up to 5 MP camera input, it is well suited for embedded vis...

SKU: DF-DFR0835

This 4.7" e-ink display board integrates an ESP32-WROVER-E module (ESP32-D0WDQ6 V3) with 16MB Flash and 8MB PSRAM, providing a complete development platform for low-power e-ink projects. The display supports 16 grayscale levels and partial refresh for faster screen updates. The board features 3 ...

SKU: DF-DFR0566

An I/O expansion HAT for Raspberry Pi 4B and 3B+ that breaks out all GPIO pins into clearly labelled digital, analogue, PWM, I2C, UART, SPI, and I2S interfaces. The board is compatible with DFRobot Gravity series sensors and modules, allowing plug-and-play connections without complex wiring. The...

SKU: SF-WRL-30678 · MPN: WRL-30678

Built around Espressif’s ESP32-C5-WROOM-1 module, this Thing Plus board gives IoT projects a compact microcontroller platform with dual-band WiFi 6, Bluetooth 5 LE, Zigbee and Thread connectivity. It pairs a 32-bit RISC-V single-core microprocessor with 8MB Flash and 8MB PSRAM for connected proje...

SKU: SF-DD-27675 · MPN: DD-27675

This Thing Plus board is a wireless development platform built around the Raspberry Pi Foundation RP2350 microcontroller. It combines the familiar Thing Plus form factor with Qwiic expansion, a µSD card socket, USB-C, LiPo charging hardware and a fuel gauge for local or remote projects.The RP2350...

SKU: DF-DFR0604

The IO Expansion HAT adds digital, analogue, I2C, PWM, UART, and SPI ports to the Raspberry Pi Zero and Zero W. An on-board STM32F030 MCU provides 8-channel 12-bit ADC and PWM output, communicating with the Raspberry Pi via I2C for convenient analogue input reading and servo control. Digital por...

SKU: DF-KIT0194

This expansion ecosystem transforms the UNIHIKER M10 single-board computer into a fully functional AIoT development station. By leveraging the modular DFRobot Gravity interface, the kit allows for the seamless integration of over 16 distinct environmental monitors, vision peripherals, and intera...

SKU: SF-KIT-22230 · MPN: KIT-22230

The XRP is a hands-on robotics platform for learning, building and programming robots from beginner tasks through to more advanced challenges. It is designed to help students and newcomers explore science, engineering and problem solving with a physical robot they can assemble and customise.At th...

SKU: RB-REDBEARDUO

The RedBear Duo is a thumb-sized IoT development board with built-in Wi-Fi, Bluetooth 4.1 (dual mode), and Particle cloud connectivity. Everything you need to prototype connected devices is on board — just add your idea. Powered by an STM32F205 ARM Cortex-M3 at 120 MHz with Broadcom BCM43438 wir...

SKU: PI-PYC011

Pycase is a small, transparent case developed specifically for a Pycom development board and expansion board combo. Holds the development board, expansion board, antenna, and there’s even room for a small battery. Pycase is compatible with WiPy, LoPy, SiPy, FiPy, or GPy. Note: the expansion bo...

SKU: DF-DFR0868

The Beetle ESP32-C3 is a coin-sized IoT development board based on the ESP32-C3 RISC-V 32-bit single-core processor. Measuring just 25 × 20.5 mm, it breaks out up to 13 GPIO pins and integrates lithium battery charging management on-board — connect a Li-ion battery directly without extra charging...

SKU: WS-29086 · MPN: 29086

This compact ESP32-S3 development board combines a 2.8 inch round IPS LCD with touch control, WiFi and Bluetooth BLE 5, making it a handy platform for HMI, dashboard and embedded GUI projects.It uses an Xtensa 32-bit LX7 dual-core processor and includes onboard Flash and PSRAM, so it can smoothly...

SKU: DF-ROB0150

This board can be a cool clock, a timer, a Lucky Turntable Game, a wearable ornament, and an interactive colored pendant. With a micro:bit main board, this 24 RGB LEDs circular expansion board changes to an exquisite creator's piece. You can turn it into a tomato timer v...

SKU: DF-DFR0979

The Gravity CH423 I2C 24 Digital IO Expansion Module extends your microcontroller with 24 additional digital output/input pins over a standard I2C connection. Based on the CH423 chip, it provides 8 GPIOs with interrupt support and 16 dedicated GPOs. The built-in current drive circuit delivers up...

SKU: DF-DFR0483

DFRobot FireBeetle series is the low-power consumption micro-controller intentionally designed for Internet of Things (IoT). The series micro-controllers aims at IoT node of low-power consumption, attending to build the IoT hardware platform quickly and conveniently. There are three types o...

SKU: PI-PYC009

Pycase is a small, transparent case developed specifically for a Pycom development board and expansion board combo. Holds the development board, expansion board, antenna, and there’s even room for a small battery. Pycase is compatible with WiPy, LoPy, SiPy, FiPy, or GPy. Note: the expansion bo...