All Products
Showing 1-15 of 15 products
ThinkNode M9 Meshtastic Communication Terminal with Full Keyboard 2.4inch LCD|ESP32-S3 + LR1110 | GPS | 2300mAh-915 MHz
·
Take mesh messaging off-grid without pairing a phone to an external receiver. The ThinkNode M9 brings a full keyboard, 2.4-inch colour LCD, wireless communication and positioning into a handheld terminal.Meshtastic firmware comes pre-installed for sending messages and sharing locations over a mes...
ThinkNode M5 Walkie-Talkie Pro- Meshtastic (LoRa) Signal Transceiver |ESP32-S3 | 1.54” Screen | GPS Function-915 MHz
The Elecrow ThinkNode M5 is a high-performance LoRa communication device powered by the ESP32-S3 processor. Pre-installed with Meshtastic firmware and featuring the SX1262 wireless chip, it efficiently sends and receives LoRa signals for off-grid mesh networking. With its compact, integrated des...
Elecrow ThinkNode M1 - LoRa Meshtastic Transceiver with 1.54" EPD Screen, GPS & nRF52840 (915MHz)
·
This compact off-grid mesh communicator is designed for Meshtastic networks, letting you send secure, decentralised messages without relying on internet or mobile coverage. It combines a Nordic nRF52840 processor, Semtech SX1262 LoRa radio, GPS, BLE 5 and an always-on e-paper display in an integr...
ThinkNode M2 Meshtastic (LoRa) Signal Transceiver Powered By ESP32-S3 With 1.3” OLED Display - (Without Battery)
Elecrow ThinkNode-M2 is a high-performance LoRa signal transceiver. It uses the ESP32-S3 module as the main processor and supports Bluetooth. Users can easily configure and monitor the device through their mobile phones. M2 is pre-installed with Meshtastic firmware and equipped with an SX1262 wi...
ThinkNode M7 Meshtastic Wireless Communication Gateway, Support PoE Power, Powered By ESP32-S3 and LR1110
This ThinkNode M7 is a high-performance gateway based on the ESP32-S3 module and LR1110 LoRa chip, deeply adapted for the LoRa protocol. The device features an Xtensa 32-bit LX7 dual-core processor with a clock speed of up to 240MHz, providing powerful computing capabilities. It also integrates 2...
ThinkNode M2-Meshtastic (LoRa) Signal Communication Device with Battery
Built for off-grid messaging and device-to-device data exchange, ThinkNode M2 is a compact LoRa communication device designed for use where internet or mobile coverage may be limited.It uses an ESP32-S3 module as the main processor, supports Bluetooth setup, and comes pre-installed with Meshtasti...
Lora RFM95 Shield-915MHZ-V1.1
The Elecrow Lora Shield is a long range transceiver on a Arduino shield form factor and based on Open source library.The Lora Shield allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference i...
LoRaWAN RA-08H Development Board Integrated RP2040 with 1.8 “ LCD for Long Range Communication
Lora technology and Lora devices have been widely used in the field of the Internet of Things (IoT), and more and more people are joining and learning Lora development, making it an indispensable part of the IoT world. To help beginners learn and develop Lora technology better, we have designed ...
CrowPanel Advance 3.5"-HMI ESP32 AI Display for Meshtastic 480x320 Artificial Intelligent IPS Touch Screen with case
The CrowPanel Advance 3.5" is a Meshtastic-ready HMI touchscreen display powered by an ESP32-S3 with an onboard SX1262 LoRa module. It features a 480 × 320 IPS capacitive touch panel, integrated AI voice interaction via microphone and speaker, and a replaceable wireless module design for flexible...
CrowPanel Advance 2.8“ HMI|ESP32-S3 AI-Powered IPS Touch Screen (320x240)|With Acrylic Case
Building on the success of the CrowPanel Basic series, we proudly introduce the CrowPanel Advance Series—designed to deliver superior performance and richer features for demanding applications.The Advance ESP32 2.8-inch AI display is an upgraded version of the CrowPanel HMI 2.8-inch display. It i...
Lora RFM95 IOT Board for RPI
The LoRa RFM95 IoT Board for Raspberry Pi is a long-range wireless communication module based on the RFM95 LoRa transceiver. Operating at 915 MHz (AU/US frequency), it provides spread spectrum communication with high interference resistance, making it suitable for IoT, remote sensing, and telemet...
ThinkNode M6 Outdoor Solar Power for LoRa, Powered By nRF52840 Supports GPS
The ThinkNode M6 Outdoor Solar Power is a high-performance LoRa IoT device designed for harsh outdoor environments and industrial scenarios.It features the nRFLR1262 LoRa transceiver module and the nRF52840 core processor, supporting Bluetooth and LoRa dual-mode connectivity to ensure stable sign...
ThinkNode G3-Single Channel LoRaWAN Gateway ESP32-S3 Chip
ThinkNode G3 is a high-performance, compact LoRaWAN gateway designed for IoT communications by Elecrow. It uses the ESP32-S3 dual-core processor and Semtech SX1262 transceiver, equipped with a 240MHz dual-core main control, integrated Bluetooth, WiFi and optional 4G modules(Not yet released), an...
SX1278 LoRa Module 433M 10KM
This AI-Thinker LoRa module is built on the Semtech SX1278 chip and operates at 433 MHz with a communication range of up to 10 km. Using Semtech's patented LoRa modulation technology, it achieves an exceptional sensitivity of −148 dBm with +20 dBm (100 mW) transmit power, delivering long-range, l...
SX1278 LoRa Module 433M 10KM Ra-02 Wireless Spread Spectrum Transmission Socket for Smart Home DIY
Ra-02 is a wireless transmission module based on SEMTECH's SX1278 wireless transceiver. It adopts advanced LoRa spread spectrum technology, with a communication distance of 10,000 meters. It has strong ability of anti-jamming and has the function of air wake-up Consumption. The SX1278 RF modul...