All Products

SKU: SF-COM-10633

A large 10 mm through-hole LED with a diffused green glow. The opaque epoxy package produces a soft, even light output that's easy to see from wide viewing angles — perfect for indicators, prototyping, and decorative projects. Key Features 10 mm Diffused Package – Soft, even glow with wide vie...

SKU: LB-LR0280-100-G

A bulk pack of 100 green 10mm through-hole LEDs with a diffused lens. The opaque epoxy package produces a soft, even glow rather than a harsh point of light. Key Features Diffused Lens – Soft, even glow with wide light distribution 10mm Diameter – Large, visible LED for indicator and display ...

SKU: AF-844

These large 10mm diffused green LEDs provide bright, wide-angle visibility that's easy to see even in daylight. The diffused lens spreads light evenly for a clean glow from any viewing angle, making them ideal as status indicators and display elements. Breadboard compatible for easy prototyping. ...

SKU: AF-4204

A mixed pack of 25 diffused 10 mm LEDs in five colours — white, blue, green, yellow, and red (5 of each). The large diffused lens provides wide-angle visibility and even light output, making these LEDs easy to see in daylight and from any direction. Breadboard-compatible with standard through-ho...

SKU: AF-848

Make some beautiful colors with these diffused 10mm tri-color LED with separate red, green and blue LED chips inside! They make a nice indicator, and fun to color-swirl. We like diffused RGB LEDs because they color mix inside instead of appearing as 3 distinct LEDs. These are Common-Anode type w...

SKU: SF-COM-30231 · MPN: COM-30231

This is a basic diffused green LED in a surface-mount package, suitable for compact indicator, status and display applications where a through-hole LED would take up too much space.It uses a diffused white rectangular flat-top lens for a soft green output and a wide viewing angle. The small SMD f...

SKU: AF-1814

A 10-segment LED bar graph display in pure green — a vivid, true green that's much closer to blue than typical "yellow green" LEDs. At just 1" (25mm) long, it's compact enough to plug directly into a breadboard while remaining clearly visible. The diffused rectangular lenses give a clean, even gl...

SKU: AF-1451

Diffused 5mm tri-colour LEDs with separate red, green, and blue chips inside a square "Piranha" (super-flux) package. With a 90° viewing angle and up to 3000mcd combined brightness, these LEDs are great for colour mixing, indicators, and illumination projects. They plug into a breadboard diagonal...

SKU: SF-COM-11120

Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft, diffuse glow.Features: Forward Voltage (R/G/B): 2.0 / 3.2 / 3.1V Forward Current: 20mA Intensity (R/G/B): 550 / 250 / 700 mcd Common Cathode Documents: Datasheet LED Tutorial

SKU: SF-COM-08861

Huge 10mm through-hole LEDs. Features: 515-520nm Green 3.0-3.4VDC Forward Voltage 80mA Forward Current 30 degree viewing angle 16,000-22,000 MCD output Documents: Datasheet LED Tutorial

SKU: SF-COM-13326

Sometimes when you have too many choices, it’s hard to make a good decision. In fact, there are times when you just want a bag of LEDs, just one of each, that’s all you want. Well here you go! The LED Mixed Bag contains one each of our 10mm LEDs. This is a great way to sample each one and deci...

SKU: SF-COM-11121

Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft, diffuse glow.Features: 3.0-3.4VDC Forward Voltage 20mA Forward Current 40 degree viewing angle 150-180 MCD output Documents: Datasheet LED Tutorial

SKU: AF-2680

OK you've signed up for Adafruit.io and you're ready to build something cool and Internet-connected. All you need is this starter kit which will get you going with lots of parts that go very well with our service and are the most common sensors and actuators you may want. Sense light, motion, ...

SKU: SF-COM-10821

A 5 mm diffused RGB LED with a common anode configuration. Three individual colour channels (red, green, blue) share a single anode pin, allowing independent control of each colour. Use it as a multi-colour status indicator, or drive all three channels with PWM to mix custom colours. The diffuse...

SKU: AF-6156 · MPN: ADA6156

This diffused RGB backlight is a rigid acrylic light panel like the kind normally found behind LCD displays, but with a full-colour LED instead of a plain white backlight. The acrylic spreads the light from a single LED to give a near-uniform glow across the lit area.The flat rear side includes a...

SKU: AF-5696

We are very excited to carry a new bundle supporting Adafruit friend and maker Jen Fox and her new book, Beginning Breadboarding: Physical Computing and the Basic Building Blocks of Computers!  Using fun, hands-on projects, learn what a circuit is and how it works! This book uses a common...

SKU: AF-5431

A pack of five handcrafted, sphere-shaped green LEDs from dLUX-dLITE by Unexpected Labs. Each LED features a semi-diffused 9.9 mm globe that adds a unique decorative touch to PCBs, electronics projects, and art installations. Because they are handmade, every LED is slightly different in appearanc...

SKU: LB-TRAFFIC-LED

Doing some breadboarding and want to make up your own set of traffic lights?This kit includes 1 x Red 10mm LED1 x Yellow 10mm LED1 x Green 10mm LED5 x 220ohm Resistors

SKU: PI-COM0609

LEDs are a great addition to any project. Whether you need a power indicator, a set of status lights, or a whole array for something more decorative these little through hole LEDs are always useful.Sold in a variety of colours these 10mm LEDs come in packs of 5 and are great both for prototyping ...

SKU: LB-EAGLED-LED-G

EagLED LEDs were made for e-textiles! This is a simple pack of green wearable leds that are still attached to one another. Simply snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up! It is made in Australia and is a lower cost e-textiles led alternativ...