All Products

SKU: SF-DEV-22659

BeaglePlay is an open-source single board computer built around the Texas Instruments AM6254 processor (quad-core ARM Cortex-A53) with 2GB DDR4 RAM and 16GB eMMC storage. It is designed to simplify connecting sensors, actuators, and human interfaces to a reliable embedded Linux system. The board...

SKU: WS-13857

A 7-inch IPS HDMI display with case from Waveshare, featuring 1024×600 hardware resolution (configurable up to 1920×1080 via software). The toughened glass capacitive touch panel (6H hardness) provides smooth 5-point touch input on supported systems. Compatible with Raspberry Pi, Jetson Nano, Be...

SKU: AF-1934

This 7" TFT display delivers 800×480 resolution with an extra-bright backlight and a versatile driver board that accepts HDMI, VGA, and composite (NTSC/PAL) video inputs. Simply connect a 5–12V DC power adapter and plug in your video source — the driver auto-detects the active input and displays ...

SKU: WS-25093

A 1.5-inch OLED display module with 128×128 resolution and black/white pixels. Built around the SH1107 driver chip with an ultra-narrow bezel, it supports both 4-wire SPI and I2C interfaces and includes an onboard voltage translator for compatibility with 3.3 V and 5 V microcontrollers. Waveshar...

SKU: AF-2396

This 7" HDMI display with resistive touchscreen delivers 1024×600 resolution in a compact form factor ideal for Raspberry Pi, BeagleBone Black, and other single-board computers. The included mini driver board is powered via USB and accepts HDMI input for high-quality video output. The kit also i...

SKU: DF-DFR1026

This is a DC charging and discharging integrated module, with 5V normally open output, which is not affected by load access and has a maximum load current of 2A. It features 4 levels of charge/discharge electricity indication and button-controlled output. The module comes with a built-in power ma...

SKU: SF-DEV-27873 · MPN: DEV-27873

This is a platinum-tier FPGA development board designed for high-speed performance in compact builds. Its low-profile backside has no components taller than 1.5mm, enabling the use of high-speed 1.5mm stack-height DF40 connectors for GTP-capable interfaces such as PCIe 2.0.At the centre is a Xili...

SKU: EL-DIS12101C

A 10.1" IPS capacitive touchscreen monitor with 1280 × 800 resolution, built-in dual stereo speakers, and a metal enclosure. It supports mini-HDMI and VGA video inputs with signal switching, and features 5-point touch with the GT911 touch controller — driver-free on most systems. The display is ...

SKU: AF-1933

A 7" TFT display with 800×480 (WVGA) resolution and a compact HDMI mini driver board. Simply connect the USB power cable to a 5V supply and plug in an HDMI source for instant video output — no complex configuration required. The display uses the AT070TN94 panel and is driven by a small HDMI driv...

SKU: AF-2395

A 7-inch touchscreen display with 1024×600 resolution and a resistive touchscreen overlay, ideal for Raspberry Pi projects, embedded computing, and multimedia setups. The included driver board supports HDMI, VGA, and composite (NTSC/PAL) inputs, making it compatible with a wide range of devices. ...

SKU: AF-1680

A 5.0-inch TFT display with 800×480 resolution and LED backlight, providing a large, vibrant screen for embedded projects. This version does not include a touchscreen overlay, making it a lower-cost option when touch input is not required. This is a raw RGB TTL (parallel pixel-clock) display — i...

SKU: AF-2218

The TFP401 breakout is a compact HDMI/DVI decoder that outputs raw 24-bit colour pixel data to 40-pin TTL displays. It decodes unencrypted video at any resolution from 25–165 MHz pixel clock (up to 1080p) and includes a built-in backlight driver with PWM dimming control. Designed for use with si...

SKU: DF-DFR0559-1

Note: Includes Solar Power Manager 5V and Semi Flexible Monocrystalline Solar Panel (5V 1A). The DFRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded solar power management modules for makers and application...

SKU: PL-2267

A NEMA 17 hybrid bipolar stepper motor with a 1.8° step angle (200 steps per revolution). Each phase draws 1.7 A at 2.8 V, delivering a holding torque of 3.7 kg·cm. Four colour-coded wires with bare leads connect to two coils: black/green for one coil, red/blue for the other. Best driven with a ...

SKU: SF-LCD-22495 · MPN: LCD-22495

A compact monochrome OLED breakout board featuring a 64×48 pixel blue-on-black display (0.66" diagonal). Equipped with two Qwiic connectors for solderless I²C connection, plus 0.1"-spaced header pins for breadboard use. The board includes I²C pull-up and address jumpers on the back for flexible c...

SKU: AF-1596

A 5.0-inch TFT display with 800×480 resolution, LED backlight, and a 4-wire resistive touchscreen overlay. The touchscreen adds user input capability for interactive interfaces, menus, and control panels. This is the touchscreen version of the 5.0" 40-pin TFT Display without Touchscreen. This is...

SKU: AF-1872

This 8 MHz ceramic resonator is a breadboard-friendly oscillator with built-in load capacitors, making it a simple drop-in timing source for microcontrollers. With 0.5% accuracy, it's well suited for everyday electronics, UART baud-rate generation, and general microcontroller clocking. The 3-pin...

SKU: EC-DISSF116P

An 11.6-inch 1920×1080 IPS touchscreen monitor with HDMI and VGA inputs. The 10-point capacitive touch panel is plug-and-play over USB — no drivers required. Built-in dual speakers, a 3.5mm headphone jack, and a 3.5mm audio input round out the connectivity. Compatible with Raspberry Pi (3, 4, 5)...

SKU: SF-ROB-13656

This NEMA 23 bipolar stepper motor delivers 125 oz·in of holding torque with 200 steps per revolution (1.8° step angle). Equipped with extra-long 600 mm AWG22 wires, it's designed for CNC applications where longer cable runs are needed. Stepper motors provide precise position control without the...

SKU: LB-LR0121L

This HD 7-inch Touch Screen Display is an affordable way to add video output to your Raspberry Pi.  The display has a resolution of 1024 x 600, and supports the Raspberry Pi 3 Model B(and other hardware such as the Banana Pi and Orange Pi, Beaglebone Black etc). The display connects to your...