All Products
Showing 1-20 of 60 products
Synthetos gShield (grblShield) V5
·
The Synthetos gShield (formerly grblShield) V5 is a 3-axis CNC stepper motor driver shield for Arduino. Designed as a complete hardware companion for the grbl CNC motion control firmware, it turns an Arduino Uno into a capable CNC controller for mills, routers, laser cutters, and other motion-con...
Motoron M3S256 Triple Motor Controller Shield for Arduino (Connectors Soldered)
The Motoron M3S256 Triple Motor Controller Shield for Arduino makes it easy to control DC motors from an Arduino or Arduino-compatible board through an I²C interface. Each module can independently control up to three motors, and multiple shields can be stacked on top of the same Arduino for proje...
4 Channel I2C Motor Shield-V1.1
This motor shield uses dual TB6612 MOSFET drivers and a PCA9685PW I2C PWM controller to drive up to 4 DC motors or 2 stepper motors from an Arduino or compatible board. All motor control and speed management is handled via the I2C bus, freeing up digital pins for other uses. The stackable design...
Pololu Dual G2 High-Power Motor Driver 18v18 Shield for Arduino
The Pololu Dual G2 High-Power Motor Driver 18v18 Shield uses pairs of discrete MOSFET H-bridges to drive two large brushed DC motors. It has an Arduino shield form factor for direct plug-in use, and also breaks out all motor driver pins along the left side for standalone operation without an Ardu...
2x2A DC Motor Shield For Arduino
The DFRobot 2×2A DC Motor Shield uses the L298P dual full-bridge driver chip to control two DC motors at up to 2 A per channel. It stacks directly onto Arduino Uno and Arduino Mega boards, using PWM pins 5 and 6 for speed control and digital pins 4 and 7 for enable/disable. The shield can be pow...
![Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit [v2.3]](/rails/active_storage/representations/redirect/BAh7BkkiC19yYWlscwY6BkVUewdJIglkYXRhBjsAVGkCxwVJIghwdXIGOwBUSSIMYmxvYl9pZAY7AEY=--be53511e4bffcc386d14cc91e4d5fa7bc52d1658/BAh7BkkiC19yYWlscwY6BkVUewdJIglkYXRhBjsAVHsIOgtmb3JtYXQ6CXdlYnA6EnJlc2l6ZV90b19maXRbB2kCkAFpApABOgpzYXZlcnsHOgxxdWFsaXR5aVc6CnN0cmlwVEkiCHB1cgY7AFRJIg52YXJpYXRpb24GOwBG--f55be79df1f1b025f86d676a642df617e240cfbc/image_cffee67c-857a-46f6-8d7e-71857a2f29bb.jpg)
Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit [v2.3]
·
The Adafruit Motor/Stepper/Servo Shield v2.3 is the upgraded successor to the original Motor Shield, delivering higher current, lower voltage drop, and a fully I2C-based design that frees up your Arduino's PWM pins. Drive up to 4 DC motors or 2 stepper motors plus 2 hobby servos from a single sta...
Adafruit 16-Channel 12-bit PWM/Servo Shield - I2C interface
·
The Adafruit 16-Channel PWM/Servo Shield brings PCA9685-based servo and PWM control to any Arduino in a convenient shield format. Using only I2C (SCL and SDA), the shield provides 16 channels of 12-bit PWM output with a built-in clock — no continuous signal from your microcontroller needed. Up t...
Gravity: IO Expansion Motor Driver Shield
Gravity IO Expansion Shield with Motor Driver is a new product designed for Arduino Boards. It combines IO Expansion Shield and DC Motor Driver Shield, equipped with Gravity sensor interface and TB6612FNG dual motor driver. It also has XBee socket, I2C interface and UART po...
Arduino Compatible Motor Servo Controller Module
This versatile motor and servo controller shield for Arduino drives up to 4 bidirectional DC motors or 2 stepper motors, plus 2 servos — all from a single board. The 4 onboard H-bridges provide 0.6A per channel (1.2A peak) with thermal protection, and the dedicated servo ports use the Arduino's h...
MotoMama
MotoMama is an Arduino shield built around the L298N H-bridge driver chip for small motor and robot projects. It can drive two DC motors or one four-wire, two-phase stepper motor.Motor power can be supplied through the onboard power terminal, which can also power the Arduino board. Alternatively,...
Arduino Quad DC Motor Driver Shield
INTRODUCTION The latest quad motor driver shield for Arduino, compatible with 5V/3.3V Arduino controller, can control up to four DC motors with 8 pins at the same time. The shield supports PWM speed control and polarity control. The driver shield includes two TB6612FNG ...
2x1A DC Motor Shield for Arduino
The DFRobot 2×1A DC Motor Shield uses the L293 motor driver chip to control two 7–12 V DC motors at up to 1 A per channel. It stacks directly onto Arduino Uno and Arduino Mega boards, using pins 4, 5, 6, and 7 for motor control with PWM speed support. Key Features Dual Motor Drive – Control tw...
2x2A Arduino Motor Shield Twin
The DFRobot 2×2A Motor Shield uses the L298P dual full-bridge driver chip to control two 4.8–35 V DC motors at up to 2 A per channel. It stacks directly onto Arduino Uno and Arduino Mega boards, using PWM pins 10 and 11 for speed control and digital pins 12 and 13 for enable/disable. The shield ...
TMC260 Stepper Motor Driver Shield For Arduino
INTRODUCTION This is a stepper motor driver introduced by DFRobot for those projects require powerful stepper motors, such as a pair of automatic curtains, an XY Plotter. This shield allows Arduino drive stepper motors (up to 2A per motor coil, 40V max). This stepper mo...
SparkFun Ardumoto - Motor Driver Shield
The Ardumoto Shield is a dual-motor controller for Arduino based on the L298 H-bridge. It can drive two DC motors at up to 2A per channel, making it an excellent platform for RC vehicles and small autonomous robots. The board draws power from the Arduino's Vin line and includes blue and yellow L...
SparkFun Wireless Motor Driver Shield
The SparkFun Wireless Motor Driver Shield is designed to make connecting motors, sensors and other components to your Arduino-based project as fast and easy as possible. The heart of the Wireless Motor Driver Shield is the Toshiba TB6612FNG H-Bridge Motor Driver, which allows the shield to contro...
Adafruit TB6612 1.2A DC/Stepper Motor Driver Breakout Board
·
The Adafruit TB6612 Breakout is a compact dual H-bridge motor driver that can spin two DC motors bidirectionally, step one bipolar or unipolar stepper, or fire two solenoids — all at up to 1.2A continuous per channel (3A peak). It's the same driver chip used in the Adafruit Motor Shield and Motor...
Dual Channel H-Bridge Motor Shield-V1.5
The Dual Channel H-Bridge Motor Shield is composed of 2 discrete MOSFET H-bridge, designed to drive two DC motor with max current 8A. It is made up of 8 N-channel MOSFET IRF3205S and 4 pcs of half bridge motor controller IR2104, to build 2 H-bridge. With this shield and the Arduino board, users c...
Arduino Motor Shield R3
INTRODUCTION The Arduino Motor Shield is based on L298 (a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors). It helps you drive two DC motors with Arduino board as well as control the speed and direction of the ...
Four - Channels Motor Shield For Arduino
This Adruino compatible motor Driver shield is a full-featured products that it can be used to drive 4 DC motor or two 4-wire stepper and two 5v servo. It drive the DC motor and stepper with the L293D,and it drive the servo with arduino pin9 and pin10. Features Be able to drive 4 DC motor and...
