All Products

SKU: DF-DWG0003

A frosted milky-white acrylic base plate for the Arduino UNO and Leonardo. The base mounts underneath the board using nylon standoffs, protecting the underside from contact with work surfaces and giving your setup a clean, professional look. Made from high-quality double-sided frosted acrylic wi...

SKU: PR-PIM086

A laser-cut acrylic base plate that replaces the bottom layer of a Pibow case, adding a secure mounting area for breadboard prototyping alongside your Raspberry Pi. Compatible with Raspberry Pi 3, A+, Zero, and Zero W, as well as Pibow, Pibow Coupé, and Pibow Zero cases. Key Features Pibow Com...

SKU: YH-6000200062

The Yahboom RTR Self-Balancing Robot Car is a ready-to-run two-wheel balancing vehicle powered by an Arduino Uno. Using an MPU6050 gyroscope and a PID-based balance algorithm, the robot maintains stable upright balance with automatic posture recognition to control the balance system on and off. T...

SKU: LB-OWL-CHASSIS

This two-wheel robot chassis provides a ready-to-build platform for your own robotics projects. It comes with two DC motors and wheels, plus a caster wheel for balance — just add your own controller board (Arduino, Micro:bit, Raspberry Pi, or similar) and a motor driver to get moving. The transp...

SKU: DF-DWG0005-U

A transparent acrylic mounting base for the DFRobot Xboard Relay. The Universe version features a decorative cutout pattern, adding a distinctive look to your project while still providing board protection. The Universe base can be paired with the Basic version as a bottom plate to create a sand...

SKU: DF-DWG0004-B

A transparent acrylic mounting base for the DFRobot Romeo and Xboard Relay boards. The Basic version provides a flat, stable platform that protects the underside of your board from contact with work surfaces and keeps your setup looking clean. The base can be paired with the Star version as a to...

SKU: DF-DFR0473

This Gravity digital relay module is designed for switching external loads from low-voltage controller boards. It suits 5V Arduino boards as well as 3.3V platforms such as Raspberry Pi, BBB, mbed, Intel Joule and Arduino 101.The module uses a high quality 3V relay and supports a wide input range,...

SKU: DF-KIT0176

The Gravity I2C 1 kg Weight Sensor Kit is a complete scale-building kit that includes a load cell, HX711 signal adapter board, acrylic mounting bracket, and all hardware needed to measure weight from 1 g to 1,000 g. The on-board MCU processes HX711 data and communicates via I²C, making it compati...

SKU: M5-A047

The PIANO is an acrylic piano keyboard base for M5Stack Core modules, designed for music and sound projects. It features two TS20 capacitive touch sensor ICs that communicate with the M5 Core via I2C, along with RGB LEDs for visual feedback as you play. Key Features Capacitive Touch Keys – Two...

SKU: PR-PIM343

The Pibow Coupé Royale is a slim, colourful, layered acrylic case for the Raspberry Pi 3 B+, 3, and 2. Five laser-cut layers of high-quality cast acrylic stack together to securely enclose your Pi while leaving all ports, the camera connector, display connector, and GPIO fully accessible. The tr...

SKU: DF-DWG0004-S

A transparent acrylic mounting base for the DFRobot Romeo and Xboard Relay boards. The Star version features a decorative star-shaped cutout design, adding a distinctive look to your project while still providing board protection. The Star base can be paired with the Basic version as a bottom pl...

SKU: EF-EF09005

The Smart Car Chassis 2WD V15 is a two-wheel-drive robot platform made from high-precision laser-cut acrylic. It comes with two 1:48 geared motors, wheels, encoder discs for speed measurement, a caster wheel, and a battery box — everything you need to build a basic mobile robot platform. The com...

SKU: LB-FABRIC

A 20-metre roll of self-adhesive conductive fabric tape with copper and nickel coating on a high-strength polyester substrate. This flexible shielding tape is designed for EMI/RFI suppression in electronics, providing effective electromagnetic shielding in a thin, easy-to-apply format. The condu...

SKU: PR-PIM341

The Pibow Coupé is a slim, open-top acrylic case for the Raspberry Pi, designed for easy access to GPIO pins and HAT compatibility. The Coupé Red version features vibrant red layers with transparent top and base, keeping your Pi visible inside. Crafted from five laser-cut layers of high-quality ...

SKU: DF-DWG0005-B

Discontinued: This product has been discontinued. We recommend the Acrylic Romeo Base – Star as a suitable replacement. A transparent acrylic mounting base for the DFRobot Xboard Relay. The Basic version provides a flat, stable platform that protects the underside of your board from contact wi...

SKU: DF-SEN0214

The Gravity Analog 20A Current Sensor measures both AC and DC current using the Hall effect, outputting a proportional analog voltage to your microcontroller. With high-voltage isolation built into the circuit design and a non-conductive acrylic base plate, it's designed for safe use in automatio...

SKU: PR-PIM056

The regal purple Coupé Royale case for Raspberry Pi A+. Pibow Coupé is a slim, hackable and attractive case crafted from three unique layers with a transparent top and base that leave your Pi visible inside. Each layer is laser-cut from colourful high-quality cast acrylic. Once stacked, they sec...

SKU: PR-PIM115

The most stylish and protective case for the Raspberry Pi now redesigned for use with the Pi-DAC+Features Supports and protects your Pi-DAC+ with your Pi! Longer bolts allow you to mount your Pibow to your project with ease (or you can cut them to size with normal kitchen scissors) Etched po...

SKU: PR-PIM344

Pibow Coupé. The slim, hackable, and attractive case for the Raspberry Pi! Note: We've redesigned Pibow Coupé to be compatible with the Raspberry Pi 3 B+, 3, and 2. Due to changes in the layout of the Raspberry Pi 3 B+, older Pibows (ones with a 3/2/B+ label) will not work with ...

SKU: PR-PIM114

The most stylish and protective case for the Raspberry Pi now redesigned for use with the Pi-DAC+Features Supports and protects your Pi-DAC+ with your Pi! Longer bolts allow you to mount your Pibow to your project with ease (or you can cut them to size with normal kitchen scissors) Etched po...