All Products

SKU: AF-353

A high-capacity 3.7 V lithium-ion battery pack built from three 2200 mAh 18650 cells connected in parallel, providing 6600 mAh of total capacity. The cells are spot-welded to a built-in protection circuit that guards against overcharging, over-discharging, and overcurrent. The pack includes a JS...

SKU: DF-DFR1247 · MPN: DFR1247

This smart UPS expansion board adds battery-backed power management to the LattePanda IOTA, giving portable and embedded builds a laptop-like uninterruptible power supply. It uses the standard HID-UPS protocol, so Windows 10 and Windows 11 can recognise it as a battery device without drivers or c...

SKU: LB-LS1558

A standard 18650 lithium-ion rechargeable battery with a built-in protection circuit for safe operation. The integrated PCB provides overcharge, over-discharge, and short-circuit protection, making it a reliable power source for electronics projects and portable devices. Key Features 2500 mAh ...

SKU: LB-OWL-CHAR

A dual-slot 18650 battery charger bundled with two 3.7 V 2000 mAh lithium-ion rechargeable batteries. The charger features overcharge protection circuitry to safely charge standard 18650 cells, making it a convenient all-in-one kit for powering portable electronics projects. Key Features Dual-...

SKU: SF-PRT-12895

No, these aren’t some sort of weird, AA battery, this is actually a 18650 Lithium Ion Cell. These round high capacity cells have been mainly used in flashlight type applications but with its capability to be used as a drop-in rechargable cell at 3.7V with a capacity of 2500mAh. This is a great ba...

SKU: DF-FIT0539

A robust battery holder designed to house three 18650 lithium-ion cells in series, delivering a nominal 11.1V output through a standard DC 2.1mm power jack. Ideal for powering projects, robots, and portable electronics that require higher voltage from rechargeable cells. The holder features a du...

SKU: SF-PRT-13189

A standard 18650 lithium-ion rechargeable cell with pre-attached solder tabs for easy integration into custom battery packs and projects. With 2,600mAh capacity at 3.7V, it provides reliable power for a wide range of applications. The solder tabs make it simple to connect cells in series or para...

SKU: DF-DFR0682

Have you ever been disrupted by a sudden power outage while working? If so, the LattePanda UPS Hat is your best choice!The LattePanda UPS Hat is compatible with the LattePanda 2 Alpha, Delta, and 3 Delta pins and can be installed directly. It uses three 18650 lithium-ion batteries as UPS storage ...

SKU: LB-LS4126-LS1558

FeaturesIndependent Charging: Each of the four slots operates independently, allowing simultaneous charging of different battery sizes or charge levels.LED Indicator Lights: Red – Charging Green – Fully Charged Safe Charging Technology: Automatic stop when fully charged Cut-off voltage: 4.23...

SKU: DF-FIT0869

A 3S (3-series) battery protection module designed for connecting three 18650 or polymer lithium-ion cells in series to create a 12 V rechargeable battery pack. The board provides overcharge, over-discharge, overcurrent, and short-circuit protection to safeguard your battery pack during charging ...

SKU: AF-2011

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 2000mAh. If you need a larger (or smaller!) battery, we have a full range of LiPoly batteriesThe batteries ...

SKU: DF-DFR1216-1 · MPN: DFR1216-1

This multi-function expansion board adds power, I/O and drive capability to UNIHIKER M10/K10 and micro:bit projects. It is designed for mobile robots, portable interactive builds and maker projects that need more connectivity than the main controller can provide on its own.The board expands your ...

SKU: SF-PRT-12711

The SparkFun USB LiPoly Charger is a single-cell Li-Ion/Li-Polymer battery charging board based on the MCP73831T. It charges 3.7V LiPo cells at a selectable rate of 500 mA or 100 mA via a solder jumper, with power input from either USB or a barrel jack connector. The board includes a SYS OUT JST...

SKU: WS-23884

Uninterruptible Power Supply (UPS) Module, Supports charging And Power output at the same time, 3S & 5V 5A Output Uninterruptible Power Supply Module 3S  Supports charging and power output at the same time, 3S * & 5V 5A output   * 3S indicates that powered by 3x 18650 Li batteries...

SKU: DF-DFR0559-1

Note: Includes Solar Power Manager 5V and Semi Flexible Monocrystalline Solar Panel (5V 1A). The DFRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded solar power management modules for makers and application...

SKU: SF-PRT-13853

This is a very small, extremely light weight battery based on Lithium Ion chemistry. This is the highest energy density currently in production. Each cells outputs a nominal 3.7V at 110mAh! Comes terminated with a standard 2-pin JST-PH connector - 2mm spacing between pins. These batteries require...

SKU: LB-00238

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 1200mAh for a total of about 4.5 Wh.The batteries come pre-attached with a genuine 2-pin JST-PH connector a...

SKU: DF-DFR0563

3.7V lithium batteries are commonly used in many projects. However, the remaining power and voltage of the lithium battery are highly nonlinear. We can only roughly judge whether the battery is full or almost empty according to its voltage. The Gravity I2C 3.7V Lithium Battery Fuel Gauge employs...

SKU: AF-2124

The Adafruit Pro Trinket LiIon/LiPoly Backpack is a tiny add-on board that sits on top of your Pro Trinket or ItsyBitsy, adding rechargeable LiPo battery support with automatic charging and power switching. When USB is connected, the battery charges automatically. Unplug USB and it seamlessly swi...

SKU: DF-DFR0969

A dual-slot 18650 battery holder with built-in charging and regulated power outputs, perfect for powering microcontrollers, sensors, and portable electronics projects. Simply install two 18650 lithium batteries and use the multiple 5V and 3.3V output ports to run your devices. The holder feature...