All Products

SKU: AF-6475 · MPN: ADA6475

Make an internet-connected RGB matrix display without the usual wiring fuss. This board plugs straight into the back of a compatible HUB75 RGB matrix, giving you an easy way to build colourful signs, clocks, status panels and data dashboards with CircuitPython or Arduino.This version uses a u.FL ...

SKU: AF-5088 · MPN: 5088

A matching pair of 4-pin JST PH compatible cables with inline plug and socket connectors. Each cable is 20 cm long with stranded 26 AWG wires, providing a reliable and compact connection that can carry a couple of amps of current. The friction-lock connectors make it easy to connect and disconne...

SKU: AF-4924 · MPN: 4924

This 1.25 mm pitch 4-pin cable is a compact, Molex PicoBlade-compatible connector cable for projects where standard 0.1″ headers are too bulky. At 20 cm long, it provides a convenient connection length for internal wiring without excess slack. The friction-lock connectors provide a secure, click...

SKU: AF-4422 · MPN: ADA4422

This 220 piece connector assortment gives your workstation a handy supply of 2.0mm pitch JST-PH compatible plugs, sockets and crimp terminals. It is a useful kit for prototyping, repairs and making up custom leads for common maker electronics.JST-PH style connectors are widely used in electronics...

SKU: AF-4392 · MPN: 4392

Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of our favorite 2mm pitch connector - the JST PH 4 pin. These are the horizontal style. You can use these with any of our JST PH 4 / STEMMA cables. They're not STEMMA QT compatible (those...

SKU: AF-4390 · MPN: 4390

Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of our favorite 2mm pitch connector - the JST PH 4 pin. These are the vertical style.You can use these with any of our JST PH 4 / STEMMA cables. They're not STEMMA QT compatible (those use the sm...

SKU: AF-4045 · MPN: 4045

This cable will let you turn a JST PH 3-pin cable socket into 4 individual tinned wires. These are great to match up with our JST 4-PH cables, for extending and connecting sensors or LEDs, and the wires are even color coded! Black for GND Red for V+ White for SDA Green for SCL Even though...

SKU: AF-4029 · MPN: 4029

This cable will let you turn a JST PH 4-pin cable port into 4 individual wires with grippy mini alligator clips. We're carrying these to match up with any of our boards or breakouts with 'STEMMA' connectors on them such as the HalloWing or NeoTrellis M4. Can also be used with any STEMMA ...

SKU: AF-3955 · MPN: 3955

This 200 mm cable converts a JST PH 4-pin connector into four individual wires with 0.1″ (2.54 mm) male header pins on the end. It's designed for connecting STEMMA and Grove I²C boards to breadboards, socket headers, or any standard 0.1″ pitch connection. Key Features JST PH to Male Headers – ...

SKU: AF-5906 · MPN: ADA5906

The Adafruit Proto Doubler PiCowbell gives your Raspberry Pi Pico or Pico W two side-by-side socket slots — plug in your Pico on one side and a PiCowbell accessory on the other, no soldering or stacking headers required. It also adds LiPo battery charging, a power switch, reset button, STEMMA QT ...

SKU: AF-5967 · MPN: ADA5967

The Adafruit Proto Tripler PiCowbell gives your Raspberry Pi Pico or Pico W three side-by-side socket slots — plug in your Pico and up to two PiCowbell accessories with no soldering or stacking headers required. It also includes LiPo battery charging, a power switch, reset button, STEMMA QT conne...

SKU: AF-261 · MPN: 261

Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with our Lipoly chargers! We have the socket 'mating' version of this cable over here, as well as an 'extension' cable that has one of each soldered together. If you want a switch in t...

SKU: AF-4352 · MPN: 4352

Build a handheld light-up button controller with this complete kit that pairs the Adafruit 4×4 NeoTrellis RGB Driver with a Feather M4 Express inside an elegant laser-cut acrylic enclosure. The 16 silicone buttons each have individually addressable NeoPixels underneath, and the seesaw I2C chip ha...

SKU: PI-ABX00011

The Arduino MKR1000 combines a powerful 32-bit ARM Cortex-M0+ microcontroller with built-in 2.4GHz Wi-Fi and hardware cryptographic authentication — all in a compact, IoT-ready form factor. It runs at 3.3V and includes an integrated Li-Po battery charging circuit, making it ideal for battery-powe...

SKU: AF-4336 · MPN: 4336

A 100 mm (4″) cable fitted with JST-PH 3-pin connectors on both ends. The latching connectors provide a secure, compact connection that won't come apart easily. Colour-coded wiring makes hookup straightforward: red for power, black for ground, and white for signal. Designed to work with STEMMA b...

SKU: AF-4722 · MPN: 4722

This matching pair of 1.25 mm pitch 4-pin cables includes an inline socket and plug connector, providing a complete Molex PicoBlade-compatible connection set. At 40 cm long, these cables offer plenty of reach for internal wiring and panel-mount applications. The friction-lock connectors provide ...

SKU: AF-5244 · MPN: 5244

A 100 mm pigtail cable with a Seeed Grove connector on one end and four bare wires on the other, for connecting Grove-compatible boards and breakouts to custom wiring. Specifications Connector – Grove (2 mm pitch), 4-pin Length – 100 mm Wires – 4 (bare ends) Wire Colours Black – GND Red...

SKU: SF-DEV-13298

The Touch Board from Bare Conductive is an easy-to-use Arduino@Heart board that gives you the ability to turn almost any material or surface into a sensor. Each Touch Board offers 12 electrodes for your a conductive ink or other type of connector that can be drawn or attached to create light s...