All Products
Showing 1-13 of 13 products
2x20 pin IDC Box Header - Raspberry Pi A+/B+/Pi 2/Pi 3
·
This 2×20 (40-pin) IDC box header is the matching connector for 40-pin GPIO ribbon cables used with Raspberry Pi models that have a 40-pin GPIO header. Solder it onto perfboard to create a breakout point for your Pi's GPIO, or use it in any custom PCB design. Key Features 40-Pin (2×20) – Match...
40 Pin GPIO Extension Cable for any 2x20 Pin Raspberry Pi - 150mm / 6 long
·
A 150mm (6″) GPIO extension cable for Raspberry Pi models with a 2×20 pin header. Extends all 40 GPIO pins between your Pi and a HAT, Bonnet, pHAT, or other accessory, allowing you to mount add-ons away from the board. Plug the socket end onto the Raspberry Pi's GPIO header (white mark aligned w...
40-pin GPIO Ribbon Cable for Raspberry Pi - Black
A 175mm black GPIO ribbon cable for Raspberry Pi, with 40-pin female IDC connectors on both ends. Bridges your Pi's GPIO header out to a breakout board, breadboard adapter, or custom PCB. Pin 1 is marked with a white/pink wire for correct orientation. Key Features Female-to-Female – 2×20 IDC s...
40-pin GPIO Ribbon Cable for Raspberry Pi - Grey
A 175mm grey GPIO ribbon cable for Raspberry Pi, with 40-pin female IDC connectors on both ends. Bridges your Pi's GPIO header out to a breakout board, breadboard adapter, or custom PCB. Pin 1 is marked with a white/pink wire for correct orientation. Key Features Female-to-Female – 2×20 IDC so...
40 Pin GPIO Male to Female Ribbon Cable - 150mm
A 150mm GPIO ribbon cable for Raspberry Pi with a 2×20 male connector on one end and a 2×20 female connector on the other. Extends the full 40-pin GPIO header for use with HATs, Bonnets, and other accessories at a distance from the board. Works with any 40-pin Raspberry Pi, including the Pi 400 ...
Adafruit Triple LED Matrix Bonnet for Raspberry Pi HUB75
·
Build large, colourful HUB75 RGB LED matrix displays from a Raspberry Pi without the usual jumper-wire tangle. This Adafruit Bonnet plugs onto the 40-pin GPIO header and drives three parallel matrix strings using the active3 pinout, so it can handle roughly three times as many panels or pixels as...
IDC Breakout Helper - 2x20 (40 pin)
·
The "poor woman's" Raspberry Pi A+ / B+ / Pi 2 cobbler! This combo of 2x20 pin (0.1 spaced) header and socket is for our popular GPIO Ribbon Cable for Raspberry Pi Model A+/B+/Pi 2 (40 pins). It comes in two parts, a 'pin-through' socket and a male header. The socket straddles the c...
IDC Breakout Helper - 2x13 (26 pin)
·
The "poor woman's" Raspberry Pi cobbler! This combo of 2x13 pin (0.1 spaced) header and socket is for our popular GPIO Ribbon Cable for Raspberry Pi Model A and B. It comes in two parts, a 'pin-through' socket and a male header. The socket straddles the center of a breadboard o...
Adafruit GPIO Expander Bonnet - 16 Additional I/O over I2C
·
The Adafruit GPIO Expander Bonnet adds 16 extra digital I/O pins to your Raspberry Pi over I²C. Based on the MCP23017 chip, it plugs directly onto the Pi's 40-pin header and communicates via SDA/SCL, leaving your other GPIO pins free. Each pin can be configured as a digital output (up to 20 mA pe...
40-pin 0.5mm pitch FPC Flex Cable with A-B Connections - 25cm long
·
A 25cm flexible flat cable (FFC) with 40 pins at 0.5mm pitch and Type A-B connections (contacts on opposite sides at each end). Designed for use with 40-pin FPC-to-IDC adapter PCBs to extend Raspberry Pi GPIO connections or other 40-pin ribbon cable applications. Pair this cable with compatible ...
40 Way IDC Line Socket
A 40-way IDC (insulation displacement connection) line socket for use with standard pitch ribbon cable. Crimps directly onto flat ribbon cable without soldering, providing a quick and reliable connection for multi-pin interfaces. Key Features Insulation Displacement – Crimps directly onto ribb...
IDC Breakout Helper - 2x8 (16 pin)
·
This 2x8 (16 pin - 0.1" spaced) IDC Breadboard Helper is great in conjunction with any 16-pin IDC cables. It comes in two parts, a 'pin-through' socket and a male header. The socket straddles the center of a breadboard or Perma-Proto and then header p...
IDC Breakout Helper - 2x3 (6 pin)
·
This little 2x3 (6 pin - 0.1 spaced) IDC Breadboard Helper is great in conjunction with our 6-pin IDC cable. It comes in two parts, a 'pin-through' socket and a male header. The socket straddles the center of a breadboard or Perma-Proto and then header p...
