All Products

SKU: AF-3231

Add long-range LoRa radio to any Feather board with the Adafruit LoRa Radio FeatherWing. Built around the SX127x LoRa module, this add-on provides kilometre-range packet radio communication at 900 MHz (tuneable to 868 MHz or 915 MHz) — perfect for sensor networks, remote monitoring, and bridging ...

SKU: AF-4633

The Adafruit LPS22 Pressure Sensor Breakout features the ST LPS22HB — a tiny absolute barometric pressure sensor capable of measuring atmospheric pressure from 260 to 1260 hPa. Use it for weather monitoring, altitude estimation, or any application where precise air pressure data matters. Despite...

SKU: AF-4530

The Adafruit LPS25 Pressure Sensor Breakout features the ST LPS25HB — an absolute barometric pressure sensor that measures atmospheric pressure from 260 to 1260 hPa. Use it for weather monitoring, altitude estimation, or any project where accurate air pressure readings are needed. The LPS25 deli...

SKU: AF-6067 · MPN: ADA6067

The Adafruit LPS28 Pressure Sensor Breakout features the ST LPS28DFW — a barometric pressure sensor with an extended range up to 4060 hPa, far beyond the ~1260 hPa limit of most competing sensors. This makes it suitable for underwater depth sensing (up to ~40 metres) as well as standard altitude ...

SKU: AF-4414

The Adafruit LPS33HW is a water-resistant barometric pressure sensor designed for use in harsh environments. The sensing element is housed in a ceramic package with waterproof gel protection, making it suitable for long-term exposure to water, chlorine, bromine, commercial detergents, fuels, solv...

SKU: AF-4258

The Adafruit LPS35HW is a water-resistant barometric pressure and temperature sensor from ST. The sensing element is housed in a ceramic package with waterproof gel protection, making it safe to use in damp and humid environments like outdoor weather stations. With 24-bit pressure data and 16-bi...

SKU: AF-4413

The Adafruit LSM303AGR combines a triple-axis accelerometer and triple-axis magnetometer in a single breakout board. The accelerometer measures gravity to determine which way is down, while the magnetometer senses magnetic north — combine the two for a complete compass and orientation solution. ...

SKU: AF-5543

The Adafruit LSM6DS3TR-C + LIS3MDL is a precision 9 Degree of Freedom (9-DoF) inertial measurement unit on a single breakout board. It pairs the LSM6DS3TR-C accelerometer/gyroscope with the LIS3MDL magnetometer — providing gravity sensing, rotation detection, and magnetic north heading with impro...

SKU: AF-4692

The Adafruit LSM6DSO32 is a 6 Degree of Freedom (6-DoF) IMU featuring a triple-axis accelerometer with an extended ±32g range and a triple-axis gyroscope. It shares the same pinout and firmware compatibility as the LSM6DSOX, but with double the accelerometer range — ideal for high-impact and high...

SKU: AF-4438

The Adafruit LSM6DSOX is a high-quality 6 Degree of Freedom (6-DoF) IMU from ST, combining a triple-axis accelerometer and triple-axis gyroscope on a single chip. Beyond basic motion sensing, it includes built-in tap detection, activity detection, a pedometer/step counter, and a programmable fini...

SKU: AF-4565

The Adafruit LSM6DSOX + LIS3MDL FeatherWing is a precision 9 Degree of Freedom (9-DoF) IMU add-on for any Feather board. It combines the LSM6DSOX accelerometer/gyroscope — known for its exceptionally low gyro drift and noise — with the LIS3MDL magnetometer for complete orientation and heading sen...

SKU: AF-4517

The Adafruit LSM6DSOX + LIS3MDL is a precision 9 Degree of Freedom (9-DoF) inertial measurement unit on a single breakout board. It combines the LSM6DSOX accelerometer/gyroscope — known for exceptionally low gyro drift and noise — with the LIS3MDL magnetometer for complete orientation and heading...

SKU: AF-4756

The Adafruit LTC4311 Active Terminator solves a common I2C problem: running long cables. Standard I2C is designed for short PCB-level connections, but cable capacitance and resistance degrade signals over distance. The LTC4311 watches the SDA and SCL lines and actively boosts pull-up current, res...

SKU: AF-5914 · MPN: ADA5914

The Adafruit LTC4316 I2C Address Translator solves one of I2C's most frustrating limitations: address conflicts. When two devices share the same fixed I2C address, this chip performs on-the-fly address translation — devices on the output side appear at a different address to the controller on the...

SKU: AF-5610

The Adafruit LTR-303 is a low-cost I2C digital light sensor that provides 16-bit measurements for both infrared and visible+IR spectrums. Subtract one from the other to get human-visible light readings. With configurable gain and integration time, it can measure from 0 to over 65,000 lux — suitab...

SKU: AF-5591

The Adafruit LTR-329 is a low-cost I2C digital light sensor that provides 16-bit measurements for both infrared and visible+IR spectrums. Subtract one from the other to get human-visible light readings. With configurable gain and integration time, it can measure from 0 to over 65,000 lux — suitab...

SKU: AF-4831

The Adafruit LTR390 is a dual-purpose UV and ambient light sensor with true UVA sensing at a peak spectral response between 300 and 350 nm. Unlike UV index approximation sensors, the LTR390 has a genuine UV photodiode — giving you real ultraviolet light measurements over a simple I2C interface. ...

SKU: AF-5100

The Adafruit MACROPAD RP2040 Bare Bones is a programmable 3×4 macro keyboard powered by the Raspberry Pi RP2040 microcontroller. It comes with a 128×64 OLED display, rotary encoder with push-button, speaker, and 12 NeoPixel LEDs — everything except the key switches and keycaps, so you can customi...

SKU: AF-5103

Complete the look of your Adafruit MacroPad RP2040 with this enclosure and hardware add-on pack. It includes a decorative bottom plate, a mechanical keyboard stabiliser plate, a rotary encoder knob, mounting screws, and rubber feet — everything you need to give your MacroPad a polished, professio...

SKU: AF-5128

The Adafruit MacroPad RP2040 Starter Kit is a complete programmable 3×4 macro keyboard powered by the Raspberry Pi RP2040 microcontroller. This all-in-one kit includes the MacroPad board, key switches, keycaps, enclosure, and hardware — ready to assemble with no soldering required. Program it wi...