All Products

SKU: SF-PRT-00091

A classic 9V battery snap connector terminated with a 2-pin polarised Molex connector. Ideal for quick-connect battery power in breadboard and prototyping setups. Key Features Molex Terminated – 2-pin polarised connector for secure, reversible connections Cable Length – 5 inches (approximatel...

SKU: DF-FIT0111

A classic 9V battery snap connector with bare wire leads, 15 cm in length. Pair it with a DC Barrel Jack Adapter – Male to power an Arduino directly from a 9V battery. Key Features Bare Wire Leads – Solder or connect directly to your project Cable Length – 15 cm Standard 9V Snap – Fits all s...

SKU: DF-FIT0131

A simple 9V battery clip cable with a 5.5 × 2.1 mm centre-positive barrel jack. Plug a 9V battery into one end and connect the other to any device with an onboard barrel jack — ideal for powering Arduinos, development boards, and evaluation boards from battery. Key Features 9V Battery Snap – S...

SKU: SF-PRT-09518

A simple 9V battery clip cable with a 5.5 × 2.1 mm centre-positive barrel jack on the other end. Plug it onto a standard 9V battery and connect directly to any device with an onboard barrel jack — perfect for powering an Arduino Uno or other development board from battery. Key Features 9V Batt...

SKU: LB-LR0296

A 9V battery clip adapter with a standard 5.5 × 2.1 mm centre-positive barrel jack. Use it to power any device that accepts 9V input through an onboard barrel jack connector. Key Features 9V Battery Snap – Standard clip fits all 9V batteries Barrel Jack Output – 5.5 × 2.1 mm centre-positive c...

SKU: DF-FIT0043

The second version of the 9V to Barrel Jack Adapter, now featuring a hard plastic battery snap for easier connection and disconnection. Plug a 9V battery into one end and connect the other to any device with a 5.5 × 2.1 mm centre-positive barrel jack. Key Features Hard Plastic Snap (V2) – Easi...

SKU: DF-SEN0313

A waterproof ultrasonic distance sensor with UART serial output. The A01NYUB measures distance by timing the ultrasonic pulse echo and outputs the result directly via asynchronous serial at 9600 bps — no external signal processing needed. With the included removable bell-mouth fitted, the effecti...

SKU: DF-SEN0311

A commercial-grade waterproof ultrasonic distance sensor with UART serial output. The A02YYUW features a much smaller blind zone (3 cm) and wider sensing angle than many comparable sensors, plus penetration through smog and dust for reliable outdoor use. The closed separated-probe design is wate...

SKU: DF-DFR1122 · MPN: DFR1122

A compact carrier board compatible with the NVIDIA Jetson Nano and Xavier NX core modules. It provides a comprehensive set of interfaces including HDMI 2.0, Gigabit Ethernet, USB 3.0, M.2 slots for WiFi/Bluetooth and NVMe SSD, CSI camera, and more — all in a lightweight 87 × 52 × 26 mm form facto...

SKU: PL-1182

A breakout board for the Allegro A4988 DMOS microstepping stepper motor driver with translator and overcurrent protection. It lets you control one bipolar stepper motor at up to 2 A per coil (with sufficient cooling) using a simple step-and-direction interface. The board ships with all surface-m...

SKU: PL-2128

The Black Edition of the A4988 stepper motor driver carrier features a four-layer PCB for better thermal performance, allowing the A4988 to deliver approximately 20% more current than the standard two-layer (green) version. It is a drop-in replacement for the original carrier in most applications...

SKU: PH-105169 · MPN: 105169

A compact A5-sized PVC cutting mat for your desk, workshop, or bag. At only 1.5 mm thick, it stows away easily in a drawer or backpack — just lay it down whenever you need to make a quick cut without damaging your work surface. Key Features A5 Size – Compact enough for any workspace 1.5 mm Th...

SKU: DF-DFR1123 · MPN: DFR1123

A compact carrier board compatible with the NVIDIA Jetson Orin NX and Orin Nano core modules. It provides a rich array of interfaces including HDMI, Gigabit Ethernet, USB 3.0, M.2 slots for WiFi/Bluetooth and NVMe SSD, CSI camera, and more — all in a lightweight 87 × 52 × 26 mm form factor. The ...

SKU: TB-SB2328

A bulk pack of 40 AAA alkaline batteries. Mercury and cadmium free, suitable for everyday household appliances such as remote controls, torches, toys, and cameras. Specifications Battery Type – AAA Alkaline Usage – Disposable (single use) Connection – Standard nipple terminal Pack Quantity ...

SKU: DF-DFR0250

A boost converter module that takes two AA batteries and outputs a stable 5 V supply for your circuits. Built around the TI TPS61032 boost chip, it accepts input voltages from 1.8–4.5 V and delivers up to 5 V @ 1 A — enough to power Arduino boards, sensors, and controllers directly from standard ...

SKU: LB-LS0431

A lightweight ABS plastic case to protect your Raspberry Pi Zero or Zero W from damage. Simple snap-together design with mounting screws included. Key Features ABS Plastic – Durable and lightweight protection Compatible – Fits Raspberry Pi Zero and Zero W Port Access – Cut-outs for cables an...

SKU: EL-MP014888

A black ABS enclosure designed specifically for the Raspberry Pi 5 with a 7″ touchscreen display. Manufactured in the UK, it features precision cut-outs for all connections and dedicated ventilation slots for efficient cooling. The self-standing design holds the display at a comfortable 33° land...

SKU: LB-FIL-0020

A 1 kg (2.2 lb) reel of 1.75 mm black ABS (acrylonitrile butadiene styrene) filament for 3D printing. ABS is a strong, durable general-purpose material suitable for prototypes, functional parts, and enclosures. Key Features High Strength – Durable prints suitable for functional parts Acetone ...

SKU: LB-FIL-0009

A 1 kg (2.2 lb) reel of 1.75 mm blue ABS (acrylonitrile butadiene styrene) filament for 3D printing. ABS is a strong, durable general-purpose material suitable for prototypes, functional parts, and enclosures. Key Features High Strength – Durable prints suitable for functional parts Acetone S...

SKU: LB-FIL-0025

A 1 kg (2.2 lb) reel of 1.75 mm fluorescent blue ABS (acrylonitrile butadiene styrene) filament for 3D printing. ABS is a strong, durable general-purpose material suitable for prototypes, functional parts, and enclosures. Key Features High Strength – Durable prints suitable for functional part...