All Products
Showing 1101-1120 of 10489 products
8x16 matrix module
8x8 RGB LED Matrix
8 x AA battery holder
8 x AA battery holder with 5.5mm/2.1mm Plug and On/Off Switch
900MHz Duck Antenna RP-SMA
90 Degree Right Angled Micro USB Male to Female
90 Degree Right Angle USB-C
915MHz LoRa Antenna RP-SMA - 1/2 Wave 2dBi
915MHz LoRa Antenna RP-SMA - 1/4 Wave 2dBi
93 LEDs WS2812B RGB 6 Ring Lamp
940nm IR Infrared and Receiver LED
960×680, 13.3inch E-Ink display HAT (K) for Raspberry Pi, SPI interface
960×680, 13.3inch E-Ink raw display, SPI interface, without PCB
960pcs Ceramic Capacitors Kit
99:1 Metal Gearmotor 25Dx54L mm HP 6V
99:1 Metal Gearmotor 25Dx54L mm LP 6V
99:1 Metal Gearmotor 25Dx54L mm MP 12V with 48 CPR Encoder
9-axis compass module CJMCU-MPU9150
9g 180° Clutch Servo
9g 180° Metal Servo with Analog Feedback (1.5kg)
8x16 matrix module
The 8×16 LED Matrix Module is an I2C-controlled dot matrix display designed for the BBC micro:bit. It can display numbers, letters, symbols, and scrolling text, making it ideal for adding visual output to micro:bit projects. The module connects via the I2C bus for simple two-wire communication a...
8x8 RGB LED Matrix
The 8×8 RGB LED Matrix is a 64-pixel full-colour display panel based on WS2812 addressable LEDs. Each LED can be independently controlled with 256 brightness levels per channel, delivering over 16 million colours at a scan rate of 400Hz or higher. The module uses a single-wire data interface (XH...
8 x AA battery holder
This 8×AA battery holder provides a portable 12V power source by connecting 8 AA batteries end-to-end in series. It delivers approximately 12VDC with alkaline cells (9.6V with NiMH rechargeables) and supports up to 2A peak current draw. The holder securely retains the batteries even when bumped ...
8 x AA battery holder with 5.5mm/2.1mm Plug and On/Off Switch
This 8×AA battery holder provides a portable power source with a built-in on/off switch and a standard 5.5 mm / 2.1 mm DC barrel plug for easy connection to Arduino boards, LED strips, motors, and other 12V devices. Use alkaline AAs for approximately 12V at 3000–4000 mAh, or rechargeable NiMH cel...
900MHz Duck Antenna RP-SMA
A 900/1800MHz dual-band duck antenna with 2dBi gain and an RP-SMA connector. Well suited for XBee 900MHz modules and other 900MHz radio applications. 50-ohm impedance, 105mm long. Specifications Frequency – 900/1800MHz dual-band Gain – 2dBi Connector – RP-SMA Impedance – 50 ohm Length – 10...
90 Degree Right Angled Micro USB Male to Female
A 90-degree right-angle Micro USB male-to-female adapter that redirects your cable sideways, reducing strain on the connector and fitting neatly into tight spaces. The male end is right-angled while the female end is straight, providing a simple plug-in solution for awkward cable routing. Key Fe...
90 Degree Right Angle USB-C
A 90-degree right-angle USB-C male-to-female adapter, ideal for tight spaces where a straight connector won't fit. Supports USB 3.1 Gen 2 data transfer speeds up to 10Gbps and includes multiple built-in safety protections. Key Features 90-Degree Right Angle – Routes cables sideways in tight en...
915MHz LoRa Antenna RP-SMA - 1/2 Wave 2dBi
A 1/2-wave 915MHz LoRa duck antenna with 2dBi gain and an RP-SMA connector. Designed for the 860–960MHz band, this 200mm antenna is ideal for extending the range of LoRa nodes and other sub-GHz radio modules. Specifications Frequency Range – 860–960MHz Gain – 2dBi Type – 1/2-wave dipole Con...
915MHz LoRa Antenna RP-SMA - 1/4 Wave 2dBi
A compact 1/4-wave rubber duck antenna for LoRa and other 860–960MHz communication. With a centre frequency of 915MHz and 2dBi gain, this 110mm antenna is ideal for space-constrained LoRa nodes where a smaller antenna is preferred. Specifications Frequency Range – 860–960MHz (centre 915MHz) G...
93 LEDs WS2812B RGB 6 Ring Lamp
A WS2812B addressable RGB LED ring lamp composed of 93 LEDs arranged in 6 concentric rings. Each ring can be controlled independently or cascaded together, and individual rings can be cut apart and recombined into custom shapes and sizes. Each LED is individually addressable over a single data w...
940nm IR Infrared and Receiver LED
A matched pair of 5mm infrared LEDs — one transmitter (clear) and one receiver (black) — operating at 940nm. Use them to build object sensors, colour sensors, line sensors, distance sensors, and custom wheel encoders. Specifications Size – 5mm Lead Length – 37mm Wavelength – 940nm (infrared)...
960×680, 13.3inch E-Ink display HAT (K) for Raspberry Pi, SPI interface
A 13.3-inch e-Paper display HAT for the Raspberry Pi, featuring a 960×680 resolution black and white panel with over 170° viewing angle. The e-ink technology requires no backlight — it reflects ambient light like printed paper and retains the displayed image even when powered off, consuming energ...
960×680, 13.3inch E-Ink raw display, SPI interface, without PCB
A 13.3-inch e-Paper raw display panel with 960×680 resolution in black and white. This is the bare display panel without a driver board — ideal for custom integrations where you have your own driver hardware or want to design a bespoke mounting solution. The e-ink technology requires no backligh...
960pcs Ceramic Capacitors Kit
This 960-piece ceramic capacitor assortment is a practical kit for prototyping, repairs, and general electronics projects. Supplied in a handy storage box, it includes 24 commonly used capacitance values, making it easy to find the right capacitor for your circuit.Each value is clearly organised...
99:1 Metal Gearmotor 25Dx54L mm HP 6V
A high-power 6V brushed DC gearmotor with a 98.78:1 metal spur gearbox. The cylindrical motor body measures just under 25mm in diameter, and the D-shaped output shaft is 4mm in diameter, extending 12.5mm from the gearbox face plate. Also available with an integrated encoder for closed-loop contro...
99:1 Metal Gearmotor 25Dx54L mm LP 6V
A low-power 6V brushed DC gearmotor with a 98.78:1 metal spur gearbox. The cylindrical motor body measures just under 25mm in diameter, and the D-shaped output shaft is 4mm in diameter, extending 12.5mm from the gearbox face plate. The low-power variant draws less current than the HP version, mak...
99:1 Metal Gearmotor 25Dx54L mm MP 12V with 48 CPR Encoder
A medium-power 12V brushed DC gearmotor with a 98.78:1 metal spur gearbox and an integrated 48 CPR quadrature encoder on the motor shaft. The encoder provides 4741.44 counts per revolution of the gearbox output shaft, enabling precise closed-loop speed and position control. The cylindrical motor...
9-axis compass module CJMCU-MPU9150
The CJMCU-MPU9150 is a 9-axis motion tracking breakout board based on the InvenSense MPU-9150 System in Package (SiP). It combines a 3-axis gyroscope, 3-axis accelerometer, and 3-axis digital compass (magnetometer) in a single module, providing complete orientation and motion sensing over I2C. T...
9g 180° Clutch Servo
A 9g micro servo with 180° rotation and a built-in clutch mechanism that protects the servo from damage when external forces are applied. If the servo angle is changed by an external force during operation, the clutch allows it to automatically reset and continue working without stripping gears o...
9g 180° Metal Servo with Analog Feedback (1.5kg)
A 9g micro servo with 180° rotation, metal gears, and built-in analog feedback (0–3.3V). The analog feedback signal allows connection to an MCU for closed-loop position control, providing more precise operation than standard open-loop servos. The compact 22.9 × 12.2 × 32.5mm body fits into tight...
