All Products

SKU: AF-4548 · MPN: 4548

Here at Adafruit we love discovering new and exotic glowing things. Like moths to the flame, we were intrigued by these fresh Flexible Silicone Neon-Like LED Strips! They look a lot like neon, but without the need for expensive transformers, glass tubing or inert gasses.Flexible and bendy, this p...

SKU: AF-5975 · MPN: ADA5975

A compact single-NeoPixel breakout board with mounting holes and pluggable JST SH connectors, perfect for adding individually addressable RGB lighting to small projects. The PCB measures less than 13 × 13 mm and works with both 3.3V and 5V power. Two 3-pin JST SH (1 mm pitch) connectors allow ea...

SKU: AF-4960 · MPN: 4960

These reverse-mount NeoPixel RGB LEDs (SK6812-E) are designed to be soldered from the top of a PCB and shine through a cutout in the board. This keeps the component side flat and simplifies manufacturing by placing all parts on one side. At just 3.1 × 2.7 × 1.7 mm, they're tiny but bright — and t...

SKU: PR-PIM250

Ideal for a mini CCTV system, this set of horizontal and vertical motion servos will give you Pi camera movement with a minimum of fuss. Pan-Tilt HAT lets you mount and control one of our pan-tilt modules right on top of your Raspberry Pi. The HAT and its on-board microcontroller let you indep...

SKU: AF-5650

The Feather RP2040 SCORPIO is designed specifically for driving large quantities of NeoPixels (WS2812) using the RP2040's PIO state machines. It features 8 consecutive GPIO outputs with a 3V-to-5V level shifter, allowing you to drive 8 independent NeoPixel strips simultaneously via DMA — with zer...

SKU: AF-6000 · MPN: ADA6000

The Adafruit Feather RP2350 brings the powerful RP2350 microcontroller to the classic Feather form factor, giving you full compatibility with the entire FeatherWing ecosystem. With dual Cortex-M33 cores running at 150 MHz, 520 KB of SRAM, and 8 MB of flash, this board delivers roughly twice the p...

SKU: AF-6130 · MPN: ADA6130

The Adafruit Feather RP2350 with HSTX Port and 8 MB PSRAM is the upgraded variant of the Feather RP2350, featuring a pre-soldered AP6404L 8 MB PSRAM chip for managing large data buffers, display framebuffers, and memory-intensive applications directly in mappable RAM. Combined with dual Cortex-M3...

SKU: AF-3811 · MPN: 3811

A beginner-friendly NeoPixel strip with colour-coded alligator clips — no soldering or breadboard required. This compact 0.5-metre strip has 30 individually addressable RGB LEDs at 60 LED/m density on a black flex PCB, providing tighter pixel spacing in a shorter length. Also available as a 1-met...

SKU: AF-3812 · MPN: 3812

A beginner-friendly NeoPixel strip with colour-coded alligator clips — no soldering or breadboard required. Simply clip onto your microcontroller and start glowing. The strip has 30 individually addressable RGB LEDs on a 1-metre black flex PCB with weatherproof sheathing. Uses SK6812 LEDs that w...

SKU: AF-2963

The Mini Skinny NeoPixel strip packs 60 individually addressable RGB LEDs into one metre, with an ultra-narrow 7.5 mm wide flexible PCB (5 mm without casing). This is the white PCB, 60 LED/m version — a lower-density option that's easier to power and ideal for projects where pixel spacing isn't c...

SKU: AF-2959 · MPN: 2959

The Mini Skinny NeoPixel strip features 60 individually addressable RGB LEDs per metre on an ultra-narrow 7.5 mm wide flexible PCB (5 mm without casing). This is the white PCB version — identical specs to the black PCB variant, just with a different-coloured flex strip for a brighter, more visibl...

SKU: AF-2949 · MPN: 2949

The Mini Skinny NeoPixel strip features 30 individually addressable RGB LEDs per metre on an ultra-narrow 7.5 mm wide flexible PCB (5 mm without casing). This is the white PCB version — identical specs to the black PCB variant, just with a different-coloured flex strip for a brighter, more visibl...

SKU: PL-3089

Add vibrant, individually addressable RGB lighting to your project with this 1-metre SK9822 LED strip. Featuring 60 LEDs with integrated drivers, each pixel can be independently controlled for colour and brightness over a standard SPI interface — no strict timing requirements like one-wire protoc...

SKU: AF-5980 · MPN: ADA5980

The Feather RP2040 Adalogger combines the RP2040 dual-core processor with a MicroSD card holder for data logging and file storage. It features 8 MB SPI flash, 264 KB SRAM, USB Type C, STEMMA QT connector, and built-in LiPo battery charging — ready for portable data recording projects with Arduino...

SKU: AF-5723

The Feather RP2040 with USB Type A Host adds a full USB Type A port to the Feather, letting you connect USB devices like keyboards, mice, flash drives, and serial peripherals. The USB host functionality is achieved through the RP2040's PIO peripheral, which emulates a USB host controller while ke...

SKU: AF-4759 · MPN: 4759

The Feather M4 CAN Express upgrades the popular Feather M4 platform with the ATSAME51J19 processor, which adds built-in CAN bus support. It features a 120 MHz Cortex M4 with hardware floating point and DSP instructions, 512 KB flash, 192 KB RAM, and an on-board CAN transceiver with 5V boost conve...

SKU: AF-5714

The Feather RP2040 with RFM95 LoRa Radio (915 MHz) combines the RP2040 dual-core processor with an SX1276-based LoRa radio transceiver for long-range wireless communication at 868 or 915 MHz. The frequency is software-configurable for your region's ISM band. LoRa modulation delivers over 2 km ran...

SKU: AF-5786

The Adafruit Metro RP2040 brings the Raspberry Pi RP2040 dual-core processor to the standard Metro/UNO shield-compatible form factor. With 16 MB of QSPI flash, a microSD card slot, USB-C, and a rich set of debugging ports, this board is an excellent platform for CircuitPython, Arduino, MicroPytho...

SKU: EC-AS402812NP

This is the NeoPixel Shield from Duinofun. This Arduino shield is equipped with 40 WS2812 RGB LEDs arranged in an 5x8 matrix with on one pin (Digital #6) needed to control them all.Each shield is powered by the 5V onboard Arduino supply and as long as you aren’t lighting up all the LEDs full powe...

SKU: AF-4892 · MPN: 4892

These incredibly small and slim surface-mount NeoPixel LEDs are an easy way to add a lot of very tiny (but bright!) colorful baguette diamond LEDs to your project. They are just 3.2mm x 1.0mm x 1.48mm and can be soldered in a few different ways: flat against a PCB, reverse mount using t...