All Products

SKU: SF-SWG-11046

These were really nice safety glasses. Then we decided to completely ruin them and slap the geek logo on there. Don’t worry, it doesn’t impair your vision… dangerously. Here our photographer, Juan, is helping our receiving guru, TJ, relive his glory days as a teenage heart-throb boy-band fro...

SKU: SF-DEV-13672

If you’re ready to step your Arduino game up from older 8-bit/16MHz microcontrollers, the SparkFun SAMD21 Dev Breakout is a great landing spot. The SparkFun SAMD21 Dev Breakout is an Arduino-sized breakout for the Atmel ATSAMD21G18, a 32-bit ARM Cortex-M0+ processor with 256KB flash, 32KB SRAM...

SKU: SF-DEV-13664

If you’re ready to step your Arduino game up from older 8-bit/16MHz microcontrollers, the SparkFun SAMD21 Mini Breakout is a great landing spot. The SAMD21 Mini Breakout is a Pro Mini-sized breakout for the Atmel ATSAMD21G18, a 32-bit ARM Cortex-M0+ processor with 256KB flash, 32KB SRAM, and an o...

SKU: SF-BOB-12941

With SD and MMC memory prices dropping, the time is right for mass storage and datalogging. This breakout board will allow you to breakout the SD/MMC socket to a standard .1" 10-pin header. Perfect for breadboarding and the likes. Board comes fully assembled and tested as shown. Dimensions: 1.3"...

SKU: SF-DEV-15096

This SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340G and takes advantage of the handy USB-C connector. With USB-C you can get up to three times the power delivery over the previous USB generation at 1.5A and and also solves the universally frustrating di...

SKU: SF-DEV-14050

The SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340G IC from WCH. It works with 5V and 3.3V systems and should auto install on most operating systems without the need for additional drivers. The Serial Basic uses the CH340G IC to quickly and easily con...

SKU: SF-ROB-09571

The SparkFun Serial Controlled Motor Driver allows you to control up to two DC motors using a serial command interface. The serial interface is easy to use and it lets the user select an individual motor, the direction, and the desired speed constant (up to 10 different speed from stop to full sp...

SKU: SF-LCD-10097

Calling this the “Serial Enabled LCD Kit” doesn’t do justice to how cool it actually is. After you’ve assembled this all-PTH kit, you’ll be left with a fully Arduino-compatible development board that just happens to have a white on black 16x2 display built-in. Turns out the ATMega328 is pret...

SKU: SF-DEV-15316

Control up to 16 servo motors from your Raspberry Pi over I2C with the SparkFun Servo pHAT. By using I2C for PWM generation, this HAT keeps all your GPIO pins free for other tasks. It also provides a serial terminal connection, so you can set up your Pi without a monitor and keyboard. Power is s...

SKU: SF-WIG-13118

The SparkFun Servo Trigger is a compact robotics board that simplifies control of hobby RC servo motors — no programming required. When an external switch or logic signal changes state, the board tells an attached servo to move from position A to position B. Simply connect a hobby servo and a sw...

SKU: SF-WIG-13872

The SparkFun Continuous Rotation (CR) Servo Trigger lets you control a hobby CR servo motor without any programming. Simply connect a servo and a switch, adjust the three onboard potentiometers, and the board handles everything — when the switch changes state, the servo transitions between two sp...

SKU: SF-BOB-10680

A breakout board for the SOIC version of the 74HC595 8-bit shift register IC. Shift registers let you expand the number of digital outputs available on your microcontroller by clocking in serial data and latching it to eight parallel outputs — using just three GPIO pins. All IC pins are broken o...

SKU: SF-BOB-00573

This is a full 8-pin breakout for the SIM socket allowing direct access to SIM communication. Note: This breakout board was originally designed for a SIM socket with a switch for card detection. We have since switched to a socket that does not have this feature so the SW1 and SW2 pins have nothin...

SKU: SF-KIT-10547

This is the latest version of our popular through-hole Simon Says Kit. We’ve made some changes to the board that should make it easier than ever for the beginner to build! All components are through-hole, making this kit a great place to start when you’re learning to solder. When building this ki...

SKU: SF-KIT-12961

Our Surface Mount Stenciling Simon Says kit is a great challenge to anyone with intermediate skills at soldering resulting in a pretty fun toy that you can be proud to say “I made this!” We want to up the ante and make you more proficient in all soldering forms, we want to teach you how to stenci...

SKU: SF-SEN-12650

The AD8232 SparkFun Single Lead Heart Rate Monitor is a cost-effective board used to measure the electrical activity of the heart. This electrical activity can be charted as an ECG or Electrocardiogram and output as an analog reading. ECGs can be extremely noisy, the AD8232 Single Lead Heart Rate...

SKU: SF-PRT-13268

A large prototyping PCB with v-scored lines that let you snap it to any custom size. The 50 × 25 solder point array provides up to 1250 plated through-hole (PTH) pins on a 2.54 mm (0.1″) pitch grid. Simply snap along the scored lines to create the exact board dimensions your project requires. Ke...

SKU: SF-BOB-00495

A simple breakout PCB that adapts a 20-pin SOIC package IC to standard 0.1″ DIP headers for easy breadboard prototyping. Solder your SOIC chip to the board and plug it straight into a breadboard or socket. Key Features SOIC to DIP Conversion – Use surface-mount ICs on breadboards 20-Pin Layou...

SKU: SF-BOB-00496

The SparkFun SOIC to DIP Adapter converts 28-pin SOIC surface-mount packages to standard 0.1" through-hole headers, making it easy to prototype with SMD ICs on breadboards or in DIP sockets. Key Features 28-Pin SOIC Layout – Pad layout fits all standard 28-pin SOIC devices 0.6" Pin Spacing – ...

SKU: SF-BOB-13655

The SparkFun 8-Pin SOIC to DIP Adapter is a small PCB that lets you adapt SOIC packages into a DIP footprint. These tiny boards are useful for modding and upgrading devices that use 8-pin DIP ICs, when the upgraded IC is only available in a SOIC footprint. You can also use these adapters for p...