All Products

SKU: EC-WGS49001G

The SIM900 is an ultra-compact and reliable quad-band GSM/GPRS module in an SMT package. Built around a powerful single-chip processor with an ARM926EJ-S core, it delivers voice, SMS, data, and fax capabilities in a tiny 24 × 24 × 3 mm form factor weighing just 3.4 g. Operating across the 850/90...

SKU: AF-2658

A set of three SIM card adapters that let you use a single SIM card across devices with different slot sizes. Includes two Nano-to-Standard adapters and one Micro-to-Standard adapter, plus a SIM ejector pin for easy removal. Adapter Sizes Nano SIM Adapters (×2) – Fits Nano SIM (~12 × 9 × 0.7 m...

SKU: PI-PPMB00111

This is a Simon:Says board for the micro:bit. With this board you can create your own Simon Says game by programming the micro:bit.We provide a simple example should you require it or why not jump in and make one from scratch? What about a two player version using the micro:bit radio functio...

SKU: DF-DRI0058 · MPN: DRI0058

This compact DFRobot driver board is made for precise control of brushless DC motors using Field-Oriented Control (FOC). At just 26 x 21.5mm, it is well suited to tight builds where smooth motion, low noise and responsive control matter.SimpleFOCmini supports closed-loop control of motor position...

SKU: AF-146

Simple needlenose pliers for twisting, pulling and pliering your project.

SKU: AF-1096

These Simple RF receivers are the easiest way possible to add wireless control, painlessly! There's no programming, configuring or addressing - simply power the receiver with ~5 VDC and press the buttons on our matching RF keyfob remote. When the A button is pressed, it activates the first pin...

SKU: AF-1097

A simple 4-channel 315 MHz RF receiver module with toggle-type output. No programming, configuration, or microcontroller needed — just power it with ~5V DC and pair it with a matching RF keyfob remote. Each of the four buttons toggles its corresponding output pin on and off. The toggle (T4) type...

SKU: AF-4394

This simple spring antenna matches great with any of our 433MHz RFM and LoRa breakouts, bonnets and Feathers. They're made of copper-clad wire so you can solder them easily.They are compact, only  ~38mm / 1.5" long, and have 2.5dBi of gain and 50Ω impedance, so it will work fantasticall...

SKU: AF-4269

This simple spring antenna matches great with any of our 900MHz RFM and LoRa breakouts, bonnets and Feathers. They're made of copper-clad wire so you can solder them easily.They are compact, only 17.5mm/0.68" long, and have 2.15dBi of gain and 50Ω impedance, so it will work fantastically with jus...

SKU: AF-5180

This Simple USB Type C breakout is kinda interesting, it looks similar to this USB Type C SMT Inline Breakout Board, but it's an 'inline' style with pads for soldering to the common USB 1.1/2.0 connections. We see this lil breakout used often in custom keyboards, it's glued or wedged into th...

SKU: AF-4965

A simple, palm-sized water detection sensor that outputs a digital high signal when water or condensation is detected on its surface. The compact red PCB features interlocking traces connected to a lightly biased transistor — when water bridges two traces, the transistor switches on and the outpu...

SKU: SF-PRT-00548

Ever wanted to see what’s on that SIM card? Use these sockets in your next project to interface to any old SIM. 6-Pin standard connection. This is a surface mount socket, but it is large enough that it can be hand soldered.

SKU: JU-R-E228

Come and join us for a bottle of our favourite tipple- Sin and Tonic. There is nothing that tastes quite so sweet! Serve with a slice of bitterness, a teaspoon of sweetness, and a twist of danger... This colourful, gold-backed, hard enamel lapel pin comes beautifully presented on a Jubly-Umph ba...

SKU: LB-CTCSINGLE

A single replacement kit for the Crack the Code unit of work. If you're already running the Crack the Code program in your classroom and need to replace or add an individual unit, this kit contains everything needed for one student station. Package Contents 1× Little Bird Arduino R3 Board 1× US...

SKU: AF-3662

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers from Pimoroni might be just what you need.  Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and whammo! Your header is secur...

SKU: AF-5383

This small, palm-sized battery power meter has a small display that shows off how much juice is left in your single Lithium Ion/Polymer rechargeable battery. The color display has four levels of power indication once battery capacity becomes 100%, 75%, 50%, and 25%. When power is below 25%, only ...

SKU: SF-CAB-19312

HARTING T1 Industrial Single-Pair Ethernet (SPE) Products feature a highly optimized, high-frequency design, shielding, and high mechanical robustness, making them an ideal choice to fulfill industrial SPE demands. This 0.5m long Single Pair Ethernet Cable enables Ethernet data transmissions by u...

SKU: DF-FIT0576

This is a soft thin protoboard with hole diameter of 1mm, hole spacing of 2.54mm. It can be soldered DIP and SMD components, and the thickness is only 0.4mm. The proto board can be appropriate bending in any direction (depending on the size of the proto board). In the actual application, it can ...

SKU: DF-FIT0609

This is a third hand soldering station with six flexible helping arms and an aluminum alloy base, allowing you to finish all kinds of complicated welding work. Aluminum-made base and rubber pad of the product are able to keep the soldering station from sliding around on your bench, which greatly ...

SKU: DF-ROB0182

This Raspberry Pi robotic arm will definitely lead you to a wonderful robot programming world! Based on a Raspberry Pi microprocessor and built-in Ubuntu system, this small but powerful Raspberry Pi Six-axis Robotic Arm comes with a working range of 280mm and supports multi-platform secondary dev...