All Products
Showing 61-80 of 100 products
16mm Metal Latching Pushbutton with Yellow LED Ring & Wires
·
Add a rugged, tidy control to your project with this small panel-mount metal pushbutton. It is a latching SPDT switch suited to basic on/off functions, with a stainless steel body and an illuminated yellow LED ring for a clean, professional-looking interface.The 16mm threaded body with 1mm pitch ...
7inch DSI Capacitive Touch Display, 1280 × 800, IPS, Optical Bonding Toughened Glass Panel
Add a crisp, touch-enabled screen to your Raspberry Pi project with this 7-inch IPS DSI display from Waveshare. The 1280 × 800 panel, wide 178° viewing angle and 10-point capacitive touch make it well suited to dashboards, control panels, kiosks, home automation interfaces and portable Raspberry ...
RGB LED Panel - 32x32
Are you looking to add a lot of color to your project? These massive 32x32 RGB LED panels are an awesome place to start. You can create animations, games, or all sorts of other fun displays with them. Yes, you read that right: a 32x32 LED matrix, that’s 1024 LEDs on a 7.5" x 7.5" board. On top of...
4.2" 400x300 Monochrome/4-Grey eInk Bare Display
·
E-Ink and ePaper panels are ideal for low-power projects where the image needs to stay visible without continuous power. This bare 4.2 inch display has a paper-like, high-contrast look that remains readable in daylight and keeps its image even when power is disconnected.This is the display elemen...
micro:Maqueen Plus V2 (Ni-MH) with HUSKYLENS and micro:bit V2
·
This classroom-ready STEAM robot bundle combines DFRobot’s Maqueen Plus V2 vehicle with a HUSKYLENS AI vision sensor and a micro:bit V2 board. It is designed for fast setup, hands-on coding lessons, line tracking, AI camera experiments and robot competition practice.Maqueen Plus V2 expands on the...
High Brightness White Electroluminescent (EL) Wire - 2.5 meters [High brightness, long life]
·
EL Wire, also known as Electroluminescent wire is a stiff wire core coated with phosphor and then covered with a protective PVC sheath. When an AC signal is applied to it, it glows an aqua (blue green) color. This EL is pink-coated so that it looks white. It looks a little like thin neon. Very...
High Brightness Blue Electroluminescent (EL) Wire - 2.5 meters [High brightness, long life]
·
EL Wire, also known as Electroluminescent wire is a stiff wire core coated with phosphor and then covered with a protective PVC sheath. When an AC signal is applied to it, it glows an aqua (blue green) color. You can make it look different colors by changing the coating, for example this is a ...
High Brightness Green Electroluminescent (EL) Wire - 2.5 meters [High brightness, long life]
·
EL Wire, also known as Electroluminescent wire is a stiff wire core coated with phosphor and then covered with a protective PVC sheath. When an AC signal is applied to it, it glows an aqua (blue green) color. You can make it look different colors by changing the coating, for example this is a ...
High Brightness Yellow Electroluminescent (EL) Wire - 2.5 meters [High brightness, long life]
·
EL Wire, also known as Electroluminescent wire is a stiff wire core coated with phosphor and then covered with a protective PVC sheath. When an AC signal is applied to it, it glows an aqua (blue green) color. You can make it look different colors by changing the coating, for example this is a ...
High Brightness Pink Electroluminescent (EL) Wire - 2.5 meters [High brightness, long life]
·
EL Wire, also known as Electroluminescent wire is a stiff wire core coated with phosphor and then covered with a protective PVC sheath. When an AC signal is applied to it, it glows an aqua (blue green) color. You can make it look different colors by changing the coating, for example this is a ...
High Brightness Red Electroluminescent (EL) Wire - 2.5 meters [High brightness, long life]
·
EL Wire, also known as Electroluminescent wire is a stiff wire core coated with phosphor and then covered with a protective PVC sheath. When an AC signal is applied to it, it glows an aqua (blue green) color. You can make it look different colors by changing the coating, for example this is...
Arduino Compatible Lithium Battery USB Charger Module
This compact TP4056-based module charges a single lithium cell from a 5V USB supply. With charge state LEDs and both mini-USB and solder tab inputs, it's an easy way to add rechargeable battery capability to your projects. Pair it with a DC-to-DC boost converter to create a device that runs on a...
PCB of Arduino LCD Keypad Shield
This is the back panel pcb of 1602 Arduino LCD Shield. This shield allows you to place your own LCD onto this shield. It only requieres a 16x2 HD44780 compatible LCD. This Shield uses Arudino LCD4Bit library. The pcb is compatible with the following LCD: Basic 16x2 Character LCD -...
Weatherproof Metal Pushbutton with Blue LED Ring [16mm Blue Momentary]
·
This chrome-plated metal pushbutton is built tough and looks great doing it. Simply drill a 16mm hole into any panel up to 12.7 mm thick, drop it in, and tighten the included nut — a rubber gasket keeps water out of your enclosure. The flat metal actuator is surrounded by a blue LED ring that lig...
Weatherproof Metal Pushbutton with Red LED Ring [16mm Red Momentary]
·
A chrome-plated metal pushbutton with an illuminated red LED ring, designed for panel mounting in a 16 mm hole. The weatherproof design includes a rubber gasket to seal the enclosure against water ingress, making it suitable for both indoor and outdoor applications. The switch and LED are electr...
Adafruit 2.13 Monochrome eInk / ePaper Display FeatherWing - 250x122 Black and White
·
Add a crisp, paper-like display to your Feather project with the Adafruit 2.13" Monochrome eInk FeatherWing. This 250×122 pixel black-and-white eInk panel delivers excellent daylight readability and retains its image even with power completely disconnected — just like printed paper. The FeatherW...
Adafruit 2.13 Monochrome eInk / ePaper Display with SRAM - 250x122 Monochrome
·
Add a crisp, paper-like display to your microcontroller project with the Adafruit 2.13" Monochrome eInk Breakout. This 250×122 pixel black-and-white eInk panel delivers excellent daylight readability and retains its image even with power completely disconnected — just like printed paper. An onbo...
Adafruit 2.7 Tri-Color eInk / ePaper Shield with SRAM - Red Black White
·
Add a large, vibrant tri-colour eInk display to your Arduino project with this shield. The 2.7" panel displays red, black, and white pixels at 264×176 resolution that remain visible even with power completely disconnected. The shield form factor plugs directly onto Arduino-compatible boards from ...
Octopus Segment LED Brick
OCTOPUS 056C Segmentric is a type of common cathode digital tube display module based on HT16K33 drive, using a standard I2C communication interface. The module using 0.56 inches common cathode digital tube with clock point and and decimal point can be used for simple clock display and d...
Rugged Metal Pushbutton with Black Finish - 16mm 6V RGB Latching
·
A rugged, chrome-plated latching pushbutton with a built-in RGB LED ring. Drill a 16 mm hole in any panel up to 6.35 mm (1/4") thick and mount it securely — an included rubber gasket provides a water-resistant seal for enclosures. The flat metal actuator latches on press and releases on a second...