All Products

SKU: DF-FIT0992

This is an uninterruptible power supply (UPS) expansion board specifically designed for Raspberry Pi 5 Single Board Computer. It can be used as a mobile power supply, providing a stable 5V output with a maximum of 5A.Its enhanced power management system can intelligently monitor the power status ...

SKU: DF-DFR1188 · MPN: DFR1188

The Beetle RP2350 is a coin-sized development board built around the Raspberry Pi RP2350 microcontroller with a unique dual-core, dual-architecture design. Choose between ARM Cortex-M33 or Hazard3 RISC-V cores running at 150 MHz, with 520 KB of RAM and 2 MB of flash — delivering serious processin...

SKU: TB-MB3703

This 4-channel universal charger handles Ni-MH, Ni-Cd, Li-ion, and LiFePO4 cells simultaneously across four independent slots. Each battery is monitored individually by a microprocessor with precise Pulse Width Modulation (PWM) control, ensuring safe and efficient charging. A single Li-ion or LiF...

SKU: LB-PHS

Kit Contains - 4 x Schottky Diode | SF-COM-10926 1 x MG996 Servo 180° Metal Gear | LB-LS6502 1 x Geared Stepper Motor 5V w/ Driver | LB-LR0228 2 x L9110H H-Bridge Motor Driver for DC Motors - 8 DIP - 2.5V-12V 800mAh || AF-4489 1 x 130 Size Hobby Motor 3-6V 4000RPM | LB-LR0244 1 x Ad...

SKU: DF-DFR0535-1 · MPN: DFR0535-1

Build a compact off-grid power supply for embedded electronics, IoT nodes and low-power projects with this solar power management kit from DFRobot. It combines a Solar Power Manager board for 9V/12V/18V panels with a compact 9V 220mA solar panel.The controller integrates constant-voltage MPPT sol...

SKU: AF-2124

The Adafruit Pro Trinket LiIon/LiPoly Backpack is a tiny add-on board that sits on top of your Pro Trinket or ItsyBitsy, adding rechargeable LiPo battery support with automatic charging and power switching. When USB is connected, the battery charges automatically. Unplug USB and it seamlessly swi...

SKU: AF-1904

The Adafruit Micro Lipo with MicroUSB Jack is a compact charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Plug in any Micro USB cable to a USB power source and connect your battery via the JST connector — two LEDs show status at a glance (red = charging, gr...

SKU: AF-1905

The Adafruit Mini Lipo with Mini-B USB Jack is a compact charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Plug in any Mini USB cable to a USB power source and connect your battery via the JST connector — two LEDs show status at a glance (red = charging, gr...

SKU: AF-259

This is a Lithium Ion and Lithium Polymer battery charger based on the MCP73833. It uses a USB mini-B for connection to any computer or 'USB wall adapter'. Charging is performed in three stages: first a preconditioning charge, then a constant-current fast charge and finally a constant-volta...

SKU: AF-1304

The Adafruit Micro Lipo is a tiny USB charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Its gold-plated PCB-style USB connector plugs directly into any USB port — connect your battery via the JST plug and charging begins automatically. Two LEDs indicate sta...

SKU: AF-2465

The PowerBoost 1000C is a DC/DC boost converter with a built-in LiPo battery charger and smart load-sharing circuit. It takes any 3.7V LiIon/LiPoly battery and boosts the output to 5.2V for powering 5V projects like Arduino, Raspberry Pi, or BeagleBone — even while the battery is charging. The l...

SKU: LB-00238

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 1200mAh for a total of about 4.5 Wh.The batteries come pre-attached with a genuine 2-pin JST-PH connector a...

SKU: AF-1781

A 3.7V 2,200 mAh lithium-ion cylindrical battery with built-in protection circuitry for over-voltage, under-voltage, and over-current protection. Slim enough to fit into many project enclosures and includes a JST 2-pin cable with a genuine JST connector for smooth, snag-free connections. The bat...

SKU: AF-4236

A 3.7 V lithium-ion polymer (LiPo) battery with 420 mAh capacity (approximately 1.55 Wh). It features a short cable with a genuine 2-pin JST-PH connector that clicks smoothly into matching JST jacks without snagging. The battery includes built-in protection circuitry that guards against overchar...

SKU: AF-2011

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 2000mAh. If you need a larger (or smaller!) battery, we have a full range of LiPoly batteriesThe batteries ...

SKU: SF-PRT-12711

The SparkFun USB LiPoly Charger is a single-cell Li-Ion/Li-Polymer battery charging board based on the MCP73831T. It charges 3.7V LiPo cells at a selectable rate of 500 mA or 100 mA via a solder jumper, with power input from either USB or a barrel jack connector. The board includes a SYS OUT JST...

SKU: AF-1885

When I was studying power supply electronics in school, the instructor always talked about adding BFC's to the circuit - Big Freakin' Capacitors. This here is UHFC - Unbelievably Huge Freaking Capacitor. If you have a super-cap project that needs up to 700 Farads of capacitance, check it out...

SKU: AF-354

Need a big battery for your project? This lithium ion pack is made of 2 balanced 2200mAh cells for a total of 4400mA capacity! The cells are connected in parallel and spot-welded to a protection circuit that provides over-voltage, under-voltage and over-current protection. Each cell can provid...

SKU: AF-353

A high-capacity 3.7 V lithium-ion battery pack built from three 2200 mAh 18650 cells connected in parallel, providing 6600 mAh of total capacity. The cells are spot-welded to a built-in protection circuit that guards against overcharging, over-discharging, and overcurrent. The pack includes a JS...

SKU: AF-659

FLORA is Adafruit's fully-featured wearable electronics platform. It's a round, sewable, Arduino-compatible microcontroller designed to empower amazing wearables projects.FLORA comes with Adafruit's support, tutorials and projects. Check out dozens of FLORA tutorials on the Adafruit Learnin...