All Products
Showing 61-80 of 100 products
Adafruit ATtiny816 Breakout with seesaw - STEMMA QT / Qwiic
The Adafruit ATtiny816 Breakout with seesaw is a compact development board that combines an ATtiny816 microcontroller with the Adafruit seesaw I2C framework and STEMMA QT connectivity. Pre-programmed with seesaw firmware, it acts as an I2C-controlled co-processor — adding GPIO, ADC, PWM, and NeoP...
Adafruit EYESPI Pi Beret - Buttons, EYESPI and STEMMA QT
The EYESPI Pi Beret is a slim HAT for Raspberry Pi that provides an EYESPI display connector, STEMMA QT port, buttons, and a slide switch — everything you need to add a colour TFT or E-Ink display and sensors to your Pi without counting pins or fiddling with breakout boards. The EYESPI standard ...
Adafruit ESP32 Feather V2 with Headers - 8MB Flash + 2 MB PSRAM
·
The Adafruit ESP32 Feather V2 with Headers is identical to the standard ESP32 Feather V2 but comes with pin headers pre-soldered, so you can plug it directly into a breadboard or socket straight away. Built around the dual-core ESP32 at 240 MHz with 8 MB flash and 2 MB PSRAM, it includes USB-C, L...
DIY Radio kit no soldering
This is an FM Radio Amplifier Mono FM Music Player, designed as a handmade wooden assembly experimental equipment. It features a wooden casing, providing a primitive and rustic design for an FM radio. It can play music from FM radio stations, with a 3W 4ohm speaker that produces cl...
Small Alligator Clip Test Lead (set of 6)
·
Connect this to that without soldering using these small alligator clip test leads. 18" long cables with color-coded alligator clips on both ends. You get 6 pieces in 6 unique colors. Strong and grippy, these always come in handy! We often use these in conjunction with a multimeter so we do...
Pogo Pin Probe Clip - 6 Pins with 2.54mm / 0.1" Pitch
·
The Pogo Pin Probe Clip with 6 pins in a 2.54 / 0.1" pitch spacing is a great way to test and connect with pin-point accuracy without soldering! It's sort of like an alligator clip with an array of built-in springy pogo pins - so you can connect to a PCB with classic 0.1" spaced pad hol...
Jumper Wires Premium 6 M/M Pack of 50
This is a SparkFun exclusive! These are 155mm long jumpers with male connectors on both ends. Use these to jumper from any female header on any board, to any other female header. Combine these with our female to female jumpers to create a male to female jumper. Multiple jumpers can be installed n...
Jumper Wires Premium 6 M/M Pack of 100
These are 155mm long jumpers terminated as male to male. Use these to jumper from any female header on any board, to any other female header. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of one hundred jumpers (colors shown). Note: The pictures for th...
Jumper Wires Premium 6 M/F Pack of 50
This is a SparkFun exclusive! These are 155mm long jumpers terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of ten jumpers (colors shown).Dimensions: 155mm +/-5...
USB Type A to Type C Cable - 6 long
This USB Type A to Type C cable provides a simple way to connect modern USB-C devices to computers, hubs, and chargers that use the standard USB Type A (rectangular) port. At just 6 inches long, it's perfect for short, tidy connections on your desk or inside enclosures. The cable includes built-...
Red Vision Touch Display Shield for RedBoard
·
Add a compact visual interface to your RP2350 RedBoard IoT with this Red Vision touch display shield. It plugs into the standard R3 footprint, giving your IoT project a 2.0" capacitive touch LCD without needing external display cabling.The board is designed to stack neatly with the SparkFun Red V...
Jumper Wire - 0.1, 3-pin, 6 (Black, Red, White)
This is a simple three wire cable. Each cable is 6" long and is great for jumping from board to board or just about anything else. There is a 3-pin JST connector with 0.1" spacing on both ends. These jumper wires come with black, red, and white cables. Dimensions: 6" length
JST GH 1.25mm Pitch 6 Pin Cable - 100mm long
This cable is a little over 100mm / 4" long and fitted with JST-GH compatible 6-pin connectors on either end. We dig the solid and compact nature of these connectors and the latch that keeps the cable from coming apart easily, and the wires are even color coded! These would go great with SEN...
Hydra USB Power Breakout Cable - 6ft Black
·
The Hydra is a handy USB power breakout cable for powering maker projects from a USB power supply or computer. It brings out the USB 5V and GND lines so you can connect them to common project power inputs without building a one-off cable yourself.At the output end, the cable breaks power out to t...
Stereo 3.5mm Plug/Plug Audio Cable - 6 feet
·
This basic cable comes with two 3.5mm (1/8" headphone jack size) stereo connectors. It's fairly straight forward, you'll commonly need these to connect two audio devices together. Cable is 6 ft long.
SparkFun Hydra Power Cable - 6ft
Behold, the Hydra! This USB power cable probably looks a lot like something you’ve hacked together before. We do it all the time, because what is a computer if not a 5V power supply that happens to run software? The Hydra brings the 5V and GND lines from your USB power supply, computer or oth...
Red Vision Touch Display for RedBoard (Without Display)
·
This interface board is for Red Vision projects where you want the camera and vision stack, but would rather send video to a larger external monitor than use a small onboard screen. With the LCD removed, it acts as a streamlined bridge between a SparkFun Red Vision Camera Board and an RP2350 RedB...
Arduino MKR 1010 WIFI
Want to add a WiFi interface to your devices? Get the MKR WIFI 1010. It connects easily to other Arduino products and is configurable using Arduino software — and you don’t need to be a network expert. This is the newest version of the MKR 1000 WIFI, but with an ESP32 module on board made by U-BL...
Slim 19-Conductor Cable - 1.8 meter / 6 feet long
·
We accidentally got these cables that were supposed to be assembled into Slim HDMI cables - but obviously are missing the actual connectors. So we're putting them on clearance since they might be useful for some builds that need 19 conductors (4 straight conductors plus 5 sets of 3-wire twisted t...
Adafruit Metro RP2350 with PSRAM
·
The Adafruit Metro RP2350 with PSRAM upgrades the Metro RP2350 with an additional 8 MB of QSPI PSRAM for projects that need extra dynamic memory. Powered by the Raspberry Pi RP2350 dual-core ARM Cortex-M33 at 150 MHz with 520 KB SRAM, 16 MB flash, and a 5V buck converter supporting up to 2A outpu...
