All Products

SKU: PR-PIM548

Add 2.4 GHz Wi-Fi connectivity and local storage to your Raspberry Pi Pico with this compact add-on pack. The Pico Wireless Pack attaches to the back of your Pico using pre-soldered female headers — no soldering required (as long as your Pico has header pins attached). Powered by an ESP32-WROOM-...

SKU: RP-PICO-L

Ready to solder up your own PICO?  This kit comes with a Pico board, 2 x 20pin headers and a 3 pin header. The real story is: Just like another “fruit company”, Raspberry Pi dove headfirst and  developed their own custom ARM silicon, the RP2040 (learn more about the RP2040)! Subscrib...

SKU: SB-PICUBE-RED

PiCube is a 4x4x4 LED cube HAT for Raspberry Pi with 5V DC operating voltage. PiCube, a monochromatic( Red, Blue, Green) LED with 64, is the latest product in the range of technologically advanced devices of SB Components. It is designed to perform incandescent operations with low energy consump...

SKU: PI-IQA001

The IQaudIO Pi-DAC+ audio card for the Raspberry Pi delivers outstanding sonic performance and full-HDaudio capability with build-in hardware volume control. The Pi-DAC+ also includes a high quality audiophile headphone amp. The Pi-DAC+ is a fully compliant Raspberry Pi HAT (A+/B+/2) boar...

SKU: PI-IQA004

Pi-DAC PRO, a new breed of audiophile DAC for the Raspberry Pi. With Phono (RCA), Heaphone (3.5mm) and support for Balanced / Differential output (for XLR use in Studio, or home studio), complete with PCB spacers and screws The Pi-DAC PRO plugs directly on the Raspberry Pi A+/B+/2/3, there’s n...

SKU: PI-IQA003

The Pi-Digi+ plugs directly on the Raspberry Pi A+/B+/2/3, there’s no need to solder or modify your Raspberry Pi and you can be enjoying Full HD optical or electrical digital audio in minutes. IQaudIO have used the WM8804, added IQaudIO build quality, electrical isolation as stand...

SKU: PI-IQA002

The IQaudIO Pi-DigiAMP+ is a HAT-compliant DAC and amplifier board for the Raspberry Pi, combining a high-quality 24-bit/192 kHz DAC with a 2×20W Class D stereo amplifier on a single board. Based on the Texas Instruments TAS5756m chipset, it delivers full-HD audio quality with no soldering requir...

SKU: AF-2711

With the Pi-EzConnect you can connect all sorts of electronics to a single Raspberry Pi  with no soldering or breadboarding! This HAT has screw-terminals for each pin on the Pi Header Key features: Solderless or soldered connections for all GPIO’s on a Raspberry Pi Mini proto area for...

SKU: ET-1756514

The Multicomp MCKPT-G1210-3916 is a compact piezo buzzer suitable for audible alerts and indicator tones in electronic projects. Operating across a wide voltage range of 3–30 V, it's compatible with microcontrollers, development boards, and a variety of embedded systems. With an 80 dB sound pres...

SKU: AF-160

The PS1240 is a compact piezo buzzer for generating beeps, tones, and alerts in electronic projects. Drive it with a 3–30 V peak-to-peak square wave from a timer or microcontroller. It produces its loudest output around 4 kHz but works well across the 2–10 kHz range. For extra volume, use differ...

SKU: AF-4931

This thin silvery ribbon is an interesting sensor. It's made of 2mm wide by 600mm long piezoelectric film sandwich. Piezo film can be used to detect motion or vibration - when shifted around or touched, it creates a small current pulse across the terminals. If a 1 Mega-ohm resistor is placed...

SKU: SF-SEN-10293

A simple piezo element that can be used as both a sensor and a small audio transducer. When flexed or tapped, it generates a voltage that can be read by a microcontroller, making it ideal for knock and vibration detection projects. Connect the output to an analog input on your Arduino or other m...

SKU: TB-TS1660

Ideal for brazing, silver soldering, jewellery work, heat shrinking, plumbing and general hobby work. Includes bonus stand. Features: - Adjustable flame. - Portable. - Use our NA-1020 butane gas refill. - Size 155mm high x 35mm dia tank. Specifi...

SKU: SF-SEN-09196

This basic piezo sensor from Measurement Specialties is often used for flex, touch, vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage down to ADC levels. Can also be used for impact...

SKU: SF-SEN-09197

A flexible piezo vibration sensor from Measurement Specialties, commonly used for detecting flex, touch, vibration, and shock. The PVDF polymer film generates a small AC voltage (up to ±90 V) when it moves, which can be brought down to ADC-readable levels with a simple resistor divider. This vers...

SKU: SF-SEN-09198

The Minisense 100 from Measurement Specialties is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and ‘tap’ inputs from a user. A small AC and large voltage (up to +/-90V) is created when the film moves back...

SKU: SF-SEN-09199

The Minisense 100 from Measurement Specialties is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and ‘tap’ inputs from a user. A small AC and large voltage (up to +/-90V) is created when the film moves back...

SKU: AF-2718

The 7” Touchscreen Display for Raspberry Pi gives users the ability to create all-in-one, integrated projects such as tablets, infotainment systems and embedded projects! The 800x480 display connects via an adapter board which handles power and signal conversion. Only two connections to the Pi...

SKU: AF-3446

The first 'official' Pi Zero case from the Raspberry Pi Foundation is here in Raspberry Pi's sleek pink and white! While we've had our own classic Pi Zero case for a little while now, the Pi Foundation celebrates the release of the Pi Zero W with this impressive, well-designed effort that is d...

SKU: PR-PIM013

The PiGlow is a small add on board for the Raspberry Pi that provides 18 individually controllable LEDs. You can use it for all sorts of things! And of course, it fits inside a Pibow! Works just fine with all models of Raspberry Pi including the B+! There are tons of things you can do with it: ...