All Products

SKU: DF-SEN0276

The MB1009 ParkSonar-EZ-144 is an ultrasonic proximity and range sensor from MaxBotix, designed to detect vehicles within a calibrated detection zone. It reports when a target enters or leaves the zone, with both proximity and range data available via logic-level (high/low) and RS232 serial outpu...

SKU: ED-PF727068

The Parrot Mambo Fly is a compact, highly robust minidrone built for fun and learning. Fly freestyle using the Parrot Flight app, or create coded flight plans through the Tynker app to learn programming concepts through aerial challenges. Equipped with bumpers for protection, the Mambo handles a...

SKU: DF-DFR0611

The Particle Argon is a powerful Wi-Fi enabled development board that combines mesh networking and Wi-Fi over the 2.4 GHz band. It can operate as a standalone Wi-Fi endpoint or as a Wi-Fi gateway for a Particle Mesh network. Built around the Nordic nRF52840 processor, the Argon delivers excellen...

SKU: AF-4004

Woohoo, it's time for a Particle Mesh party! So why not cater for connectivity with the Particle Mesh Wi-Fi Bundle, a veritable smörgåsbord (yum!) to begin building mesh networking for your IoT project. Particle Mesh means you can create local networks that collect data, share messages, and co...

SKU: DF-DFR0373

The Particle Photon is a compact WiFi development board for building connected Internet of Things (IoT) projects and products. Powered by a Broadcom BCM43362 WiFi chip and an STM32F205 ARM Cortex M3 microcontroller running at 120 MHz, it offers serious processing power in a breadboard-friendly fo...

SKU: PI-PAR-PHOTONKIT

The Particle Photon Kit is a complete starter package for building Wi-Fi-connected IoT projects. It includes a Photon development board (with headers pre-installed), a mini breadboard, USB cable, and basic components to get started immediately. The Photon connects to the Particle Cloud, a free c...

SKU: PI-PHOTONH

The Particle Photon is a tiny Wi-Fi development board for prototyping Internet of Things products. Built around a Broadcom BCM43362 Wi-Fi chip (the same used in Nest Protect and LIFX) and a powerful STM32F205 120 MHz ARM Cortex M3 microcontroller, it connects your project to the Particle Cloud fo...

SKU: SF-SEN-19325

The SEN54 sensor module from Sensirion combines the measurement of particulate matter, VOC, humidity, and temperature in a single package. The SEN54 sensors provide fully calibrated outputs with a digital interface, a strong lifetime under 24 h/day operation, and a compact form factor. The combin...

SKU: SF-KIT-15073

The Particle Xenon is a low-cost mesh-enabled development board. With the Nordic nRF52840 SoC you have all the power of an ARM Cortex M4 with OpenThread mesh networking, NFC, plenty of GPIOs, LiPo charging and more. The board is designed to act as a standalone endpoint or repeater in a Particl...

SKU: SF-SEN-15103

The Sensirion SPS30 is a compact, high-quality optical particle sensor that uses laser scattering and Sensirion's innovative contamination-resistance technology for superior binning and particle measurement. It measures both mass concentration and particle count across PM1.0, PM2.5, PM4.0, and PM...

SKU: AF-5696

We are very excited to carry a new bundle supporting Adafruit friend and maker Jen Fox and her new book, Beginning Breadboarding: Physical Computing and the Basic Building Blocks of Computers!  Using fun, hands-on projects, learn what a circuit is and how it works! This book uses a common...

SKU: LB-LR0289

With the passive buzzer you can control the volume by PWM. A passive buzzer requires an AC signal to make a sound. It is like an electromagnetic speaker, where a changing input signal produces the sound, rather than producing a tone automatically. Power supply needs: 5V Interface type: Analog...

SKU: AF-2461

Wow that's a tiny GPS antenna! This passive antenna is only 15mm x 15mm x 6.8mm in size, with a 50mm long uFL cable. Great for when you want to keep things small. Comes with a standard uFL connector on the end. Perfect for our FONA 808! Not good for our Ultimate GPS breakouts/shields/hat as t...

SKU: AF-2460

An ultra-compact passive GPS antenna measuring just 9 × 9 × 6.5 mm, with a 50 mm uFL cable. Ideal for space-constrained projects where a full-size antenna won't fit. Key Features Tiny Form Factor – Only 9 × 9 × 6.5 mm uFL Connector – Standard uFL interface for easy connection to GPS modules ...

SKU: SF-CAB-10759

Integrating Ethernet support into your project is a great way to relay data through a local area network and even bounce information out to the internet. Sometimes it’s hard to get power to your Ethernet devices. Wouldn’t it be convenient to use the same cable for power and data? Using these powe...

SKU: AF-435

Simplify your Internet of Things with a passive PoE injector cable. These are quite handy for projects that have Ethernet connectivity and also need a power cable. Of course, you can get a long Ethernet cable but then you have to figure out how to plug it in, making a mess of wires. There is an o...

SKU: AF-5178

Dress up your mechanical keys in your favorite colors with a wide selection of gumdrop-like, retro, curvy, and stylish MA profile keycaps. Here is a 5 pack of Pink MA Keycaps for your next mechanical keyboard or NeoKey project. Snap 'em onto any Cherry MX or compatible switch&...

SKU: DF-FIT0720

These patch test hooks provide a solderless way to make signal and low-current connections between boards, sensors, and modules. The hook clips grab onto pins, pads, and component legs — perfect for prototyping with compact boards like the DFRobot Beetle or any module without pre-soldered headers...

SKU: DF-SEN0639 · MPN: SEN0639

This compact digital anemometer measures air velocity for embedded electronics and intelligent control systems. It is built around the Posifa PAV3015D thermal sensing element, using temperature differences across a thermopile structure to calculate airflow without mechanical moving parts.The boar...

SKU: AF-5631 · MPN: ADA5631

This break-apart panel gives you 12 PB86 step switch breakout PCBs, making these colourful sequencer-style switches much easier to use in a breadboard, perfboard or DIY synth build.The original switches are not breadboard or perfboard friendly, so these assembled breakouts save you from hand-wiri...