All Products

SKU: AF-5870 · MPN: ADA5870

This compact breakout adds a high-resolution, single-channel ADC to your I2C bus, making it a handy choice for precision differential measurements. It is built around the MCP3421, a simple and low-cost 18-bit ΔΣ converter with adjustable gain, a built-in precision reference voltage, and support f...

SKU: DF-DFR0316

A 4-channel, 18-bit delta-sigma analogue-to-digital converter (ADC) module based on the Microchip MCP3424. This module adds high-accuracy analogue input capability to Raspberry Pi, Arduino, and other microcontroller platforms over I2C. The onboard programmable gain amplifier (PGA) allows the mod...

SKU: AF-935

The MCP4725 breakout board provides a 12-bit digital-to-analogue converter (DAC) over I2C. Send a digital value and the VOUT pin outputs the corresponding analogue voltage — ideal for generating waveforms, adjustable bias points, or anywhere you need a true analogue output rather than PWM. The o...

SKU: AF-1782

This I2C digital temperature sensor is one of the more accurate/precise we've ever seen, with a typical accuracy of ±0.25°C over the sensor's -40°C to +125°C range and precision of +0.0625°C. They work great with any microcontroller using standard i2c. There are 3 address pins so you can connect ...

SKU: SF-COM-30155 · MPN: COM-30155

This surface-mount resistor provides a very low resistance value of 220 mOhms with ±1% tolerance, making it useful for compact PCB designs where precise low-value resistance is required.It is a thick film SMD part with two terminations and an automotive AEC-Q200 feature listing. The manufacturer ...

SKU: AF-1531

An RF adapter cable that converts from an MCX jack (female) to a BNC connector, allowing you to connect BNC antennas and equipment to devices with MCX ports. Useful for SDR dongles, RF receivers, and other radio equipment. Key Features MCX Jack to BNC – Adapts MCX female to BNC connector Shor...

SKU: AF-1532

This RF adapter bit is great for anyone doing RF work. If your receiver/transmitter/transceiver has an MCX connector but you really want to tie it to an SMA antenna, this dongle will do the trick!

SKU: PI-ESP004

This board has the same Bluetooth LE module that used on Puck.js and Pixl.js, pre-programmed with Espruino. Just apply power, connect with Bluetooth LE or Serial and start writing JavaScript! This is a board with 0.1" pins, a voltage regulator, 2 LEDs and a button. It's thin, small, an...

SKU: DF-DFR0904

This is the first PLC equipment based on the Arduino Technology designed for a professional use. Taking Arduino Mega2560 as its core control chip, the M-Duino PLC has 21 I/Os including 6 analog and digital inputs, 5 digital isolated inputs, 2 interrupt isolated inputs, 3 analog outputs, 5 di...

SKU: DF-DFR0905

This is the first PLC equipment based on the Arduino Technology designed for a professional use. Taking Arduino Mega2560 as its core control chip, the M-Duino PLC has 17 I/Os including 4 analog and digital inputs, 2 interrupt isolated input, 3 analog outputs, 8 digital isolated relay outputs...

SKU: DF-DRI0002

A dual H-bridge DC motor controller based on the L298N driver chip, capable of driving two bi-directional DC motors at up to 2 A per channel. The module accepts a wide motor supply voltage of 4.8–46V and includes high-speed protection diodes and an enlarged heatsink for improved thermal performan...

SKU: DF-SEN0312

The ME007YS is a waterproof ultrasonic distance sensor designed for non-contact liquid level measurement and other distance sensing applications. With an IP67-rated sealed probe and UART serial output, it delivers reliable readings from 28 cm to 450 cm. Operating at 5V with a simple 3-wire conne...

SKU: SF-TOL-14100

This is the big kahuna from Mean Well, a 350W single output switching power supply. This power supply is extremely reliable and beefy, able to output 24VDC at 14.6A. If you’ve been looking for a powerful power supply for your next big project, look no further. We can definitely attest to its dura...

SKU: PI-MIME-004

The build-it-yourself robot arm kit The MeArm Maker is an easy-to-build robot arm kit that's designed to get children (and adults!) learning about technology, engineering and programming. It's been expressly designed to be easy to build (age 11+) and use. It comes without the controller, leavi...

SKU: PI-MIME-003

The MeArm Pi is an easy-to-build robot arm kit that's designed to get children (and adults!) learning about technology, engineering and programming. It's been expressly designed to be easy to build (age 11+) and use. At its heart is the Raspberry Pi, a low cost computer that has been developed...

SKU: JU-JU-W-LP334 · MPN: JU-W-LP334

You tried to follow the pattern. You really did. This pin is for anyone who’s ever cut the wrong size, lost their last needle, or discovered that yes, glue absolutely does dry faster when it shouldn't. Perfect for makers with a mouth and a sense of humour. This colourful, gold-back...

SKU: DF-FIT0662-1

Note: The kits include two pairs of Mecanum wheels: two left-handed wheels and two right-handed wheels. Please pay attention to the L and R noted on the back of the product when installing,What wheels should your robot car use? How about Mecanum wheel! The Mecanum wheel is an omnidirect...

SKU: DF-FIT0661

This left-handed 48 mm Mecanum wheel enables omnidirectional movement for your robot — forward, sideways, diagonally, and zero-radius rotation. By combining left and right Mecanum wheels in pairs, a four-wheeled robot can move in any direction without needing to turn first. The wheel features 9 ...

SKU: DF-FIT0662

A 48 mm right-handed Mecanum wheel that enables omnidirectional movement for robot platforms. Using angled rollers mounted around the wheel's circumference, Mecanum wheels allow a vehicle to move forward, sideways, diagonally, and rotate on the spot when used in sets of four with the correct left...

SKU: EF-EF09088