All Products

SKU: SS-114991884

The BitCar is a micro:bit-powered robot car kit featuring autonomous line following, ultrasonic obstacle avoidance, and remote control capabilities. Built around a sturdy chassis with two metal gear motors, the car includes built-in modules for buzzer, line follower, and four addressable RGB LEDs...

SKU: AF-3695

The Adafruit DragonTail for micro:bit breaks out all of the micro:bit's edge connector pads to standard 0.1" headers for easy breadboard use. Simply slot your micro:bit into the card-edge connector and every pin — including I2C, SPI, and analogue inputs — becomes accessible on a solderless breadb...

SKU: EF-EF03410

A dedicated power supply module for the BBC micro:bit that provides a stable 3.3V output at up to 2A. Connects directly to the micro:bit's battery connector, delivering stronger and more consistent power than standard battery packs — ideal for projects driving motors, servos, or LED strips. Acce...

SKU: LB-MICRO-INVENT

Get creative, connected and coding with a complete inventor kit for the BBC micro:bit. It includes a micro:bit board and a selection of parts for building and experimenting with multiple electronic circuits.You can work through projects that teach you how to read sensors, move motors, build Bluet...

SKU: AF-3928

The Adafruit CRICKIT for micro:bit is a robotics and electronics driver board designed for the BBC micro:bit. Plug your micro:bit into the 40-pin edge connector and start controlling motors, servos, solenoids, NeoPixels, capacitive touch sensors, and a speaker — all managed over I2C via the Adafr...

SKU: PI-PPMB00130

The Amp:bit is the easiest way to connect a speaker or headphones to your BBC micro:bit. It plugs directly onto the edge connector and provides a 3.5mm headphone jack, solder pads for a speaker, and a volume control wheel — everything you need to add audio to your micro:bit projects. If you have...

SKU: EF-EF10111

A crystal-clear acrylic enclosure for the BBC micro:bit with an integrated 2×AA battery holder on the back. The two-piece case wraps the micro:bit while leaving the A and B buttons and edge connector gold fingers fully exposed for easy access. Key Features Material – Crystal acrylic, two-piece...

SKU: EF-EF04089

Sonar:bit is a 3-wire ultrasonic distance sensor designed for micro:bit and Arduino projects. Operating on 3–5V, it works directly with both 3.3V and 5V systems using a single GVS cable — saving an I/O port compared to traditional 4-wire ultrasonic modules. With a measurement range of 4–400cm an...

SKU: EF-EF10130

Alligator clips (also known as crocodile clips) are one of the most useful tools on any maker's workbench. Whether you're testing a circuit, connecting a micro:bit to external components, or extending your multimeter leads, these spring-loaded clips make quick, reliable connections without solder...

SKU: LB-LR0293-30

These compact jumper cables feature a premium male header pin on one end and a grippy mini alligator clip on the other — perfect for breadboarding with non-header-friendly boards and components. Clip onto a micro:bit, Circuit Playground, conductive materials, or even a banana, then plug straight ...

SKU: LB-LR0293-29

These compact jumper cables feature a premium female header on one end and a grippy mini alligator clip on the other — perfect for breadboarding with non-header-friendly boards and components. Clip onto a micro:bit, Circuit Playground, conductive materials, or even a banana, then plug straight in...

SKU: AF-3811

A beginner-friendly NeoPixel strip with colour-coded alligator clips — no soldering or breadboard required. This compact 0.5-metre strip has 30 individually addressable RGB LEDs at 60 LED/m density on a black flex PCB, providing tighter pixel spacing in a shorter length. Also available as a 1-met...

SKU: AF-3812

A beginner-friendly NeoPixel strip with colour-coded alligator clips — no soldering or breadboard required. Simply clip onto your microcontroller and start glowing. The strip has 30 individually addressable RGB LEDs on a 1-metre black flex PCB with weatherproof sheathing. Uses SK6812 LEDs that w...

SKU: PR-PIM371

The automation:bit is a micro:bit expansion board for controlling and monitoring low-voltage systems up to 24 V. It features analogue and digital inputs, sinking outputs, and a relay — all accessible via 3.5 mm screw terminals. No soldering required. Program it using the block-based Microsoft Ma...

SKU: EF-EF03418

The 8×16 LED Matrix Module is an I2C-controlled dot matrix display designed for the BBC micro:bit. It can display numbers, letters, symbols, and scrolling text, making it ideal for adding visual output to micro:bit projects. The module connects via the I2C bus for simple two-wire communication a...

SKU: EF-EF05032 · MPN: EF05032

An alcohol vapour sensor module from the ELECFREAKS PlanetX range, designed for use with micro:bit via an RJ11 connector. The MQ3 sensor uses a tin dioxide (SnO2) sensing element whose conductivity increases with alcohol gas concentration, providing an analog output you can read and process in Ma...

SKU: DF-TOY0086

The Boson Starter Kit pairs DFRobot's modular Boson electronic blocks with the BBC micro:bit, giving students and beginners a hands-on introduction to coding and electronics. The kit includes eight sensor and actuator modules covering sound, light, and motion interaction. Modules connect to the ...

SKU: LB-LS0824-V2

This IO expansion board adapter for the micro:bit V2 breaks out all pins to accessible connectors, making it easy to connect sensors, modules, servos, and other peripherals to your micro:bit projects without alligator clips or soldering. The compact, plug-in design makes it a practical addition ...

SKU: EF-EF08205

An educational coding kit built around the micro:bit and ElecFreaks Wear:bit wearable module. Learn programming through hands-on projects covering sensors, wireless communication, audio, and interactive games — all using the micro:bit's block-based or Python programming environment. The kit incl...

SKU: EF-EF10138

The KittenBot Silicone Sleeve is a soft protective case for the BBC micro:bit, available in blue. The flexible silicone wraps around the board to guard against bumps, drops, and scratches while keeping all buttons, the LED matrix, and edge connector accessible. Key Features Soft Silicone Const...