All Products

SKU: DF-SER0011

This is a metal gear servo(2.5kg) from Goteck.It's very small, lightweight, and powerful! Metal gear for longer wear life and extra strength in demanding applications. Perfect for use in medium-sized electric airplanes,helicopters or mini Robots. SPECIFICATIONS Operating voltage...

SKU: PL-228

A 2-5/8" (67mm) plastic robot wheel designed to fit Futaba-spline servo horns, making it a direct fit for continuous rotation servos. Moulded from durable ABS plastic in yellow, this wheel is a popular choice for small robotics projects and mini-sumo bots. The wheel pairs with compatible continu...

SKU: SF-ROB-10189

Here, for all your mechatronic needs, is a simple, high quality continuous rotation servo motor. This servo is able to take in 6 volts and deliver 30.6 oz-in. of maximum torque at 0.14 sec/60° A standard 3-pin power and control cable is attached and all hardware listed below is included. Featu...

SKU: DF-SER0039

A compact 9g micro servo with metal gears, delivering 1.8 kgf·cm of torque at 4.8V. The metal gear train provides significantly better durability than plastic versions, especially in robotics applications where the servo is in near-constant motion. With a 180° operating angle and a 320:1 reducti...

SKU: SF-WIG-13118

The SparkFun Servo Trigger is a compact robotics board that simplifies control of hobby RC servo motors — no programming required. When an external switch or logic signal changes state, the board tells an attached servo to move from position A to position B. Simply connect a hobby servo and a sw...

SKU: DF-SER0019

DSS-M15 is a heavy-duty metal gear standard servo with 180°wide angle, high torque power, improved stability and durability. Able to take in 6V and deliver a strong torque power of over 15Kg, this tough 180°servo will never let you down when you need it. Tested with high load capacity for ...

SKU: DF-SER0038

DSS-M15S is a heavy-duty metal gear standard servo with 270°wide angle, high torque power, improved stability and durability. Able to take in 6V and deliver a strong torque power of over 15Kg, this tough 270°servo will never let you down when you need it. Tested with high load capacity for...

SKU: PL-1046

The HD-1160A is an inexpensive, general-purpose miniature analog servo from Power HD. Servo horns and associated hardware are included.Key specs at 6 V: 0.11 sec/60°, 37 oz-in (2.7 kg-cm), 17 g.

SKU: DF-SER0037

An ultra-compact 2.5g micro servo with 360-degree continuous rotation, ideal for micro robots and space-constrained projects. The coreless motor and POM gears deliver smooth, reliable rotation in a tiny form factor measuring just 19.6 × 8.0 × 16.3mm. Controlled via standard PWM servo signals, it...

SKU: AF-167 · MPN: 167

Plastic wheel with a cutout specially designed to allow attachment to our larger continuous rotation servo. Makes it easy to get your robot rolling. Each wheel comes with a rubber tire that is quite sturdy. To attach, just remove the horn from your servo, align the splined gear, and use t...

SKU: AF-169 · MPN: 169

Tiny little servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds you're used to but smaller. You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor contro...

SKU: AF-155 · MPN: 155

This high-torque standard servo can rotate approximately 180 degrees (90 in each direction). You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gear box. Comes with 3 horns, as...

SKU: PL-2145

The HD-1600A analog servo from Power HD is a great general-purpose micro servo at a great price. Servo horns and associated hardware are included.Key specs at 6 V: 0.10 sec/60°, 18 oz-in (1.3 kg-cm), 6.0 g.

SKU: DF-FIT0334

This 300mm Y-cable is typically used to connect two servos to a single servo port on an RC receiver or servo controller. It has a single female JR connector connected to two male JR connectors, which means it is compatible with almost all of the RC servos.The connectors have gold-flashed conta...

SKU: SF-WIG-13872

The SparkFun Continuous Rotation (CR) Servo Trigger lets you control a hobby CR servo motor without any programming. Simply connect a servo and a switch, adjust the three onboard potentiometers, and the board handles everything — when the switch changes state, the servo transitions between two sp...

SKU: DF-FIT0335

This 500 mm Y-cable is typically used to connect two servos to a single servo port on an RC receiver or servo controller. It has a single female JR connector connected to two male JR connectors, which means it is compatible with almost all of the RC servos.The connectors have gold-flashed cont...

SKU: DF-SER0032

Herkulex DRS-0101 is state of the art modular smart servos incorporating motor, gear reducer, control circutry and communications capability in one single package, which can provide up to 12kg.cm at 7.4v. Equipped with a lot of adapting pieces including Horn, Horn Bolt(BHT 2.6X8), Whe...

SKU: DF-SER0033

Herkulex DRS-0201 is state of the art modular smart servos incorporating motor, gear reducer, control circutry and communications capability in one single package. Through metal brush coreless DC motor, it can provide torque up to 24kg.cm at 7.4v. Equipped with a lot of adapting piece...

SKU: DF-DRI0027

Some day,a guy want to make a robotic dog as a gift to his little son.He brought some digital servos, a microcontroller,Lipo batterys...Then he found it hard to drive these smart servos with Arduino processor! So we developed a driver board that can easily & quickly drive the digital servo...

SKU: SF-ROB-11965

A reliable, high-torque standard-size servo (FS5106B) with dual ball bearings and nylon gears. Delivering up to 83.47 oz-in of torque at 6V with a speed of 0.16 sec/60°, it's a versatile choice for robotics, RC, and mechatronics projects. Features a standard 3-pin power and control cable with 18...