All Products
AI Overview
“Feather” most often refers to Adafruit Feather-format microcontroller boards and add-ons. Here are the main options:
Feather microcontroller boards
- For RP2040 projects (CircuitPython/MicroPython): Adafruit Feather RP2040 (dual-core, 8 MB flash) — $24.00
- For ESP32 Wi-Fi + Bluetooth builds: Adafruit HUZZAH32 – ESP32 Feather Board (WiFi + BT/BLE) — $42.65
- For display-based projects: ESP32-S3 Reverse TFT Feather with w.FL Antenna (1.14" IPS TFT, ESP32-S3, w.FL) — $61.35
- For CircuitPython-focused ATSAMD21: Adafruit Feather M0 Express - Designed for CircuitPython [ATSAMD21 Cortex M0] (ATSAMD21 M0+, 2 MB SPI flash) — $41.75
- For older Feather Wi-Fi (ATWINC1500) setups: Adafruit Feather M0 WiFi - ATSAMD21 + ATWINC1500 (802.11 b/g/n via ATWINC1500) — $83.65
Feather radio boards (long-range / sub-GHz)
- LoRa 868/915 MHz: Adafruit Feather 32u4 RFM95 LoRa Radio - 868 or 915 MHz — $70.25
- LoRa 433 MHz: Adafruit Feather 32u4 RFM96 LoRa Radio - 433MHz — $73.15
- Packet radio 868/915 MHz (RFM69): Adafruit Feather 32u4 RFM69HCW Packet Radio - 868 or 915 MHz — $50.15
FeatherWings (stack-on add-ons)
- RTC + microSD datalogging: Adalogger FeatherWing - RTC + SD Add-on For All Feather Boards — $18.50
- High-accuracy RTC: DS3231 Precision RTC FeatherWing - RTC Add-on For Feather Boards — $28.05
Accessories / adapters
- Enclosure (specific fit): Adafruit Feather RP2350 HSTX Enclosure — $11.05
- Screw-terminal wiring blocks: Feather 0.1 Pitch Terminal Blocks — $12.70
- Headers for Feather boards: Short Feather Male Headers - 12-pin and 16-pin Male Header Set — $1.25
- Use FeatherWings with Teensy 3.x: Teensy 3.x Feather Adapter — $14.70
Kits
- IoT starter pack built around HUZZAH32: Mongoose OS Google IoT Core Pack w/ Adafruit Feather HUZZAH32 — $110.45
Collections
Showing 41-60 of 100 products
Adafruit Feather HUZZAH with ESP8266 WiFi
·
The Feather HUZZAH ESP8266 is an all-in-one Wi-Fi development board with built-in USB and battery charging. Powered by the ESP8266 with a full Wi-Fi stack, it's a compact and affordable way to add Internet connectivity to your projects using the Arduino IDE or NodeMCU Lua. The CP2104 USB-serial ...
Adafruit 4x4 Trellis Feather Acrylic Enclosure + Hardware Kit
·
This laser-cut acrylic enclosure kit turns your 4×4 NeoTrellis setup into a handheld device with an elegant black and white design and beautifully diffused button illumination. Designed to house any Adafruit Feather board (except FONA) alongside the NeoTrellis RGB Driver PCB. The enclosure inclu...
Adafruit 4x4 NeoTrellis Feather M4 Kit Pack
·
Build a handheld light-up button controller with this complete kit that pairs the Adafruit 4×4 NeoTrellis RGB Driver with a Feather M4 Express inside an elegant laser-cut acrylic enclosure. The 16 silicone buttons each have individually addressable NeoPixels underneath, and the seesaw I2C chip ha...
Adafruit 8x8 Trellis Feather M4 Acrylic Enclosure + Hardware Kit
·
This laser-cut acrylic enclosure kit turns your 8×8 NeoTrellis setup (four 4×4 NeoTrellis boards) into a handheld device with an elegant black and white design and beautifully diffused button illumination. Designed to house any Adafruit Feather board (except FONA) alongside four NeoTrellis RGB Dr...
Adafruit Feather STM32F405 Express
·
The Adafruit Feather STM32F405 Express brings STM32 power to the Feather ecosystem, running CircuitPython at a blistering 168 MHz — making it one of the fastest CircuitPython-capable Feather boards. With 1 MB of flash, 192 KB of SRAM, USB Type C, an SDIO-connected SD card slot, and a STEMMA QT co...
Adafruit eInk Feather Friend with 32KB SRAM
·
The Adafruit eInk Feather Friend is a FeatherWing-format driver board for eInk/e-paper displays with a standard 24-pin FPC connector. It includes all the power supply circuitry and level shifting needed to connect your favourite display (up to tri-colour 4.2") to any Feather board via SPI, plus a...
Assembled Adafruit Feather M0 WiFi - ATSAMD21 + ATWINC1500
·
The Adafruit Feather M0 WiFi combines an ATSAMD21G18 ARM Cortex M0+ processor with an ATWINC1500 WiFi module for an all-in-one Arduino-compatible development board with built-in USB, battery charging, and 802.11b/g/n connectivity. This version comes fully assembled with headers soldered. The FCC...
Adafruit NeoPXL8 FeatherWing for Feather M4 - 8 x DMA NeoPixels!
·
Drive massive NeoPixel installations without blocking your code. The NeoPXL8 FeatherWing for Feather M4 enables 8 concurrent DMA NeoPixel strands from a single Feather M4, with up to 1,750 RGB pixels per strand (14,000 total) — all running in the background via hardware DMA on the ATSAMD51's blaz...
Adafruit Feather nRF52840 Sense
·
The Feather nRF52840 Sense takes the popular Feather nRF52840 Express and adds a suite of on-board environmental and motion sensors. It features Bluetooth Low Energy, native USB, CircuitPython and Arduino support, plus sensors for acceleration, gyroscope, magnetometer, proximity, light, colour, g...
Adafruit FeatherWing OLED - 128x64 OLED Add-on For Feather - STEMMA QT / Qwiic
·
The Adafruit FeatherWing OLED 128x64 adds a crisp 1.3-inch monochrome OLED display and three tactile user buttons (A, B, C) to any Feather board. The 128×64 white OLED pixel array is self-emissive — no backlight needed — delivering high contrast and excellent readability in a compact form factor....
Adafruit Feather M4 CAN Express with ATSAME51
·
The Feather M4 CAN Express upgrades the popular Feather M4 platform with the ATSAME51J19 processor, which adds built-in CAN bus support. It features a 120 MHz Cortex M4 with hardware floating point and DSP instructions, 512 KB flash, 192 KB RAM, and an on-board CAN transceiver with 5V boost conve...
Adafruit ESP32-S2 Feather with BME280 Sensor - STEMMA QT
·
The Adafruit ESP32-S2 Feather with BME280 is identical to the standard ESP32-S2 Feather but with an on-board BME280 temperature, humidity, and barometric pressure sensor at I2C address 0x77. This makes it an instant IoT environmental monitor — just add Wi-Fi credentials and start logging. Built ...
Adafruit Feather nRF52 Pro with myNewt Bootloader
·
The Feather nRF52 Pro is an advanced Bluetooth Low Energy development board built around the Nordic nRF52832, designed specifically for use with the Apache Mynewt RTOS. It features a fully open-source BLE 5.0 stack, a serial bootloader for command-line firmware flashing, and an on-board SWD debug...
Adafruit ESP32 Feather V2 - 8MB Flash + 2 MB PSRAM
·
The Adafruit ESP32 Feather V2 is a major redesign of the original HUZZAH32 ESP32 Feather, featuring 8 MB flash, 2 MB PSRAM, USB-C, a STEMMA QT port, a NeoPixel, and a user button. The dual-core ESP32 at 240 MHz provides Wi-Fi and Bluetooth Classic/LE connectivity for wireless and IoT projects. D...
Adafruit ESP32-S3 Feather with STEMMA QT / Qwiic
·
The Adafruit ESP32-S3 Feather with STEMMA QT brings the dual-core ESP32-S3 to the Feather ecosystem with Wi-Fi, Bluetooth LE, and native USB. This version comes with 8 MB flash, 512 KB SRAM, and no PSRAM — suitable for ESP-IDF, Arduino, and lighter CircuitPython projects that don't require large ...
Adafruit ESP32 Feather V2 w.FL Antenna - 8MB Flash + 2 MB PSRAM
·
The Adafruit ESP32 Feather V2 with w.FL Antenna is identical to the standard ESP32 Feather V2 but replaces the PCB trace antenna with a w.FL (MHF3/IPEX3) connector for attaching an external antenna. This makes it ideal for use inside enclosures or when you need improved range from a larger dipole...
Adafruit ESP32-S3 Feather with 4MB Flash 2MB PSRAM
·
The Adafruit ESP32-S3 Feather with 4 MB Flash and 2 MB PSRAM brings the dual-core ESP32-S3 to the Feather ecosystem with Wi-Fi, Bluetooth LE, and native USB. The 2 MB PSRAM provides extra memory for large data buffers, making it well-suited for CircuitPython or projects that need fast SRAM access...
Adafruit ESP32-S3 TFT Feather - 4MB Flash, 2MB PSRAM, STEMMA QT
·
The Adafruit ESP32-S3 TFT Feather features a built-in 1.14" IPS colour TFT display (240×135 pixels, ST7789) on the front of the board. Combined with the dual-core ESP32-S3's native USB, Wi-Fi, Bluetooth LE, 4 MB flash, and 2 MB PSRAM, it provides a complete visual IoT platform in the Feather form...
Adafruit Feather RP2040 SCORPIO - 8 Channel NeoPixel Driver
The Feather RP2040 SCORPIO is designed specifically for driving large quantities of NeoPixels (WS2812) using the RP2040's PIO state machines. It features 8 consecutive GPIO outputs with a 3V-to-5V level shifter, allowing you to drive 8 independent NeoPixel strips simultaneously via DMA — with zer...
Adafruit ESP32-S2 Reverse TFT Feather
The Adafruit ESP32-S2 Reverse TFT Feather places a 1.14" IPS colour TFT display (240×135 pixels, ST7789) on the back of the board, making it ideal for panel-mounted projects where the screen faces outward through an enclosure. Three user buttons (D0, D1, D2) alongside the display provide a comple...
