All Products

SKU: DF-DFR0640

Based on Kendryte K210 RISC-V AI processor, Maixduiono AI development board comes with MI AI module and ESP32 module for WiFi and Bluetooth connectivity in Arduino UNO form factor. K210 comes with dual-core processor chip with independent FPU, 64 bits CPU bit width, 8 MB on-chip SRAM, 400 adju...

SKU: EC-DTE01016K

The ESP32-A1S Audio Development Kit is a feature-rich audio development board built around the ESP32-A1S module. It includes a dual-core Xtensa LX6 processor, Wi-Fi, Bluetooth 4.2, and a complete set of audio interfaces — making it an all-in-one platform for building smart speakers, voice assista...

SKU: DF-DFR0724

Portenta H7 simultaneously runs high level code along with real time tasks. The design includes two processors that can run tasks in parallel. For example, is possible to execute Arduino compiled code along with MicroPython one, and have both cores to communicate with one another. The Portenta fu...

SKU: RP-SC0919 · MPN: SC0919

The Raspberry Pi Pico WH is the header-ready version of the Pico W — featuring the same RP2040 microcontroller and Infineon CYW43439 wireless chip, but with male headers pre-soldered to all through-hole pads for immediate breadboard use. The CYW43439 provides Wi-Fi (802.11 b/g/n) and Bluetooth 5...

SKU: SF-WRL-23287 · MPN: WRL-23287

The SparkFun BlueSMiRF v2 with headers is a wireless Bluetooth® serial link. These boards work as a wireless serial UART pipe and are a great wireless replacement for serial cables. Simply pair, connect, and transmit serial data between your TX/RX lines! Any serial stream from 2400 to 921600 baud...

SKU: SF-WRL-22329 · MPN: WRL-22329

The Digi XBee 3 Global Cellular module is a compact, low-power module designed for rapid integration of cellular IoT capabilities. It combines LTE-M, NB-IoT, and 2G connectivity with Bluetooth Low Energy (BLE) and GNSS positioning in the familiar XBee 20-pin through-hole form factor. Optimised f...

SKU: SF-WRL-25134 · MPN: WRL-25134

Build connected sensor nodes, data loggers and battery-powered IoT projects around Raspberry Pi’s RP2350 microcontroller. This Thing Plus board adds wireless connectivity, extra memory and the familiar Feather-compatible footprint in a compact development platform.The RP2350 can run two selected ...

SKU: AF-4076 · MPN: 4076

If you have a custom PCB design and you'd like to add a little Bluetooth Low Energy, this module is ultra compact and easy to use. It contains a Nordic nRF51822 Cortex M0 chip that comes integrated with BLE radio as well as most of the supporting circuitry and even a chip antenna. The whole thing...

SKU: DF-DFR0624

ESP32-WROVER-B is a highly-integrated generic WiFi-BT-BLE-MCU module with steady performance and low power consumption. It features a PCB antenna, a 4MB SPI flash and 64-Mbit SPI PSRAM that operates at 3.3V. The module targets a wide variety of applications from low power sensor networks to the m...

SKU: DF-DFR0623

ESP32-WROVER-B is a highly-integrated generic WiFi-BT-BLE-MCU module with steady performance and low power consumption. It features an IPEX antenna, a 4MB external SPI flash and 64-Mbit SPI PSRAM that operates at 3.3V. The module targets a wide variety of applications from low power sensor net...

SKU: DF-DFR1139 · MPN: DFR1139

##Introduction The FireBeetle 2 ESP32-E (N16R2) IoT development board equipped with 16M Flash and 2M PSRAM. It is designed to provide superior performance for applications such as the LVGL graphics library for interface design and interaction. Built on the foundation of Espressif's ESP32-WROOM-32...

SKU: AF-3269 · MPN: 3269

The Espressif ESP32 Development Board breaks out all ESP32 module pins to standard 2.54 mm (0.1 in) headers, with a CP2102 USB-to-serial adapter for programming, boot and reset buttons, and an onboard 3.3 V regulator. It supports development via the Arduino IDE, ESP-IDF (Espressif's official tool...

SKU: DF-DFR0625

ESP32-PICO-KIT is a mini IoT development board with functionalities of WiFi and Bluetooth. With a size of 52x 20.3x10mm, the module integrates a 4 MB SPI flash, and a USB-UART Bridge circuit, allowing the developers to connect the board a PC’s USB port for downloading and debugging. Featuring ...

SKU: SF-DD-27675 · MPN: DD-27675

This Thing Plus board is a wireless development platform built around the Raspberry Pi Foundation RP2350 microcontroller. It combines the familiar Thing Plus form factor with Qwiic expansion, a µSD card socket, USB-C, LiPo charging hardware and a fuel gauge for local or remote projects.The RP2350...

SKU: EC-DLC35020S

This handheld terminal is based on the ESP32 controller, equipped with a powerful ESP32-S3 chip, and supports 2.4GHz Wi-Fi and Bluetooth 5 (LE), providing more powerful computing and processing capabilities for IoT terminal applications. It is suitable for various scenarios, such as industrial...

SKU: LB-HS2344

The T-Camera is a powerful and compact development board designed for camera-based IoT applications. Powered by an ESP32 dual-core processor, it combines Wi-Fi, Bluetooth, and camera functionality, making it ideal for face recognition, security monitoring, and other smart camera projects. With it...

SKU: PI-ESP004

This board has the same Bluetooth LE module that used on Puck.js and Pixl.js, pre-programmed with Espruino. Just apply power, connect with Bluetooth LE or Serial and start writing JavaScript! This is a board with 0.1" pins, a voltage regulator, 2 LEDs and a button. It's thin, small, an...

SKU: SF-DEV-23321 · MPN: DEV-23321

Bring ESP32-S3 wireless projects into the Arduino ecosystem with this compact Nano-format development board. It is designed for IoT, MicroPython and Arduino programming, making it suitable for first builds through to more advanced prototypes.The board is based on the u-blox® NORA-W106-10B module,...

SKU: AF-5890 · MPN: ADA5890

This compact ItsyBitsy board packs an ESP32 PICO module into Adafruit’s small-format microcontroller layout, with dual-core processing, Wi-Fi, Bluetooth® Classic and BLE, 8 MB of Flash and 2 MB of PSRAM.This version swaps the PCB trace antenna for a w.FL external antenna connector, making it usef...

SKU: RB-BLEMINI

BLE Mini requires only a serial port for communication so it supports all major development platforms that have UART interface including Arduino, Raspberry Pi, Netduino, BeagleBone etc. In addition, we provide you with access to all Ti's CC2540 I/O pins and the ability to upload firmware via USB,...