All Products
Showing 41-60 of 100 products
SparkFun microSD Transflash Breakout
Breakout board for the microSD socket that is not much bigger than your fingernail. Compatible with the SPI interface found on any SD card, this tiny form factor was created for cell phone storage and is perfect for your next MP3 project! Board comes fully assembled and tested. The bare socket...
Jumper Wire - JST Black Red
This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end, bare cable on the opposite end. Dimensions: 130mm length Documents: JST connector
Jumper Wire - JST Black Blue
This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end, bare cable on the opposite end. Dimensions: 100mm length Documents: JST connector
Adafruit SHARP Memory Display Breakout - 2.7 400x240 Monochrome
·
The Adafruit SHARP Memory Display Breakout features a 2.7" 400×240 monochrome LCD that combines the ultra-low power consumption of e-paper with the fast refresh rates of a traditional LCD. The larger display area and higher resolution make it ideal for detailed information displays, showing crisp...
3-Axis MEMS Accelerometer - MMA8452Q
The MMA8452Q is a low-power, 3-axis capacitive MEMS accelerometer with 12-bit resolution. Packed with embedded motion-detection functions and configurable interrupt outputs, it can monitor events autonomously while staying in a low-power state — reducing the need for the host processor to continu...
7.5inch e-Paper (G) E-Ink Fully Laminated Display, 800×480, Black / White, SPI, without PCB
This 7.5" fully laminated e-paper display features 800×480 resolution in black and white with an anti-glare toughened glass panel. The full lamination makes the panel thinner while providing better protection, and the anti-glare glass reduces ambient light interference and reflective glare for cl...
2.13-inch 250x122 Quad-Colour eInk/ePaper Bare Display
·
This bare eInk/ePaper display element gives you a compact 2.13-inch electronic paper screen with quad-colour output: red, black, yellow and white. Like an e-reader display, it is high contrast, daylight readable, and can keep the last image visible even when power is completely disconnected.Pleas...
SparkFun Audio Jack Breakout
Simple breakout board for the 3.5mm audio jack. Use this breakout (shipped bare) to allow breadboard or SIP access to the super-common 3.5mm audio jack. All five pins are broken out.
Adafruit 2.66in 296x152 Tri-Colour E-Ink Bare Display
·
E-Ink and E-Paper displays are excellent for low-power projects that need a daylight-readable screen. The image stays visible even when power is disconnected, with a high-contrast look that is much like printed paper.This is a bare 2.66 inch tri-colour EPD display element with red, black and whit...
2.66-inch 296x152 Monochrome eInk/ePaper Bare Display
·
E-Ink and ePaper panels are ideal for low-power projects where you want a daylight-readable display that keeps showing its image even when power is removed. This bare 2.66 inch panel gives you a crisp, paper-like monochrome display for DIY eInk builds.This is the display element only, so it needs...
7.5" 800x480 Monochrome eInk/ePaper Bare Display
·
This bare eInk/ePaper display is a large 7.5 inch monochrome panel with 800 x 480 pixels, designed for low-power projects where the image needs to stay visible even after power is removed.Electronic paper displays are high contrast and easy to read in daylight, giving a paper-like look that suits...
MicroMod GNSS RTK Carrier Board - ZED-F9P
·
Built around the u-blox ZED-F9P, this MicroMod carrier gives your project high-precision GNSS and RTK positioning in a swappable, solderless MicroMod format. It supports rover and base station operation, with RTK accuracy down to millimetre-level positioning when used with suitable correction dat...
3.7-inch 416x240 Monochrome eInk Bare Display
·
E-Ink and E-Paper panels are excellent for projects that need a low-power, daylight-readable display. The image remains visible even when power is disconnected, giving a high-contrast, paper-like result for static information, labels, dashboards and portable builds.This is a bare 3.7-inch monochr...
4.2" 400x300 Tri-Colour eInk Bare Display
·
E-Ink and ePaper displays are ideal for projects that need a crisp, low-power screen that remains readable in daylight. The image stays on the display even when power is completely disconnected, giving it a printed-paper style look.This bare 4.2 inch diagonal tri-colour display has 400 x 300 pixe...
3.7 inch 416x240 Tri-Colour eInk Bare Display
·
E-Ink and E-Paper panels are excellent for low-power projects that need a daylight-readable display. The image remains visible even when power is disconnected, giving a high-contrast, paper-like result that suits signage, labels, dashboards and other static displays.This bare 3.7 inch tri-colour ...
4.2" 400x300 Monochrome/4-Grey eInk Bare Display
·
E-Ink and ePaper panels are ideal for low-power projects where the image needs to stay visible without continuous power. This bare 4.2 inch display has a paper-like, high-contrast look that remains readable in daylight and keeps its image even when power is disconnected.This is the display elemen...
SparkFun Pro nRF52840 Mini - Bluetooth Development Board
The SparkFun Pro nRF52840 Mini is a breakout and development board for Nordic Semiconductor’s nRF52840 – a powerful combination of ARM Cortex-M4 CPU and 2.4GHz Bluetooth radio. With the nRF52840 at the heart of your project, you’ll be presented with a seemingly endless list of project-possibiliti...
Camera Board 360 Gooseneck Mount
A flexible gooseneck mount for the Raspberry Pi camera module. The 170 mm arm bends to any position and holds firmly in place, letting you point the camera up, down, or at any angle with millimetre-precise adjustments. Lightweight and compatible with both cased and bare Raspberry Pi boards. The ...
SparkFun Arduino ProtoShield - Bare PCB
The SparkFun Arduino ProtoShield is a bare PCB with no attached or included parts that lets you customize your own Arduino shield using whatever circuit you can come up with! You will even be able to test your circuit or project to make sure everything is working the way it should! The Spark...
Bluetooth 5.0 Audio Receiver Board
This is a compact and cost-effective Bluetooth 5.0 audio receiver module that supports automatic reconnect function. It can be powered by a micro USB or 3.7V lithium battery. You can easily convert your old speakers into wireless Bluetooth speakers with this module. If you short circuit the So...
