All Products

SKU: AF-382

A Zero Insertion Force (ZIF) socket for DIP chips of up to 28 pins and 0.3" width. The lever mechanism allows you to insert and remove chips without applying force, preventing bent or damaged pins. Lift the lever to open, drop the chip in, and push the lever down to latch it securely. The socket...

SKU: AF-2770

The 2.8" TFT Display is a bare LCD module with a capacitive single-touch touchscreen. Featuring 240×320 resolution with individual RGB pixel control and a bright 4-LED backlight, it delivers vivid full-colour output for custom projects. The display is driven by the ILI9341 chipset and the touchs...

SKU: AF-1774

The 2.8" TFT Display with Resistive Touchscreen is a bare LCD module featuring 320×240 resolution with individual RGB pixel control. Driven by the ILI9341 chipset, it supports SPI (3- or 4-wire), 8-bit parallel, and 16-bit parallel interfaces. The resistive touchscreen is an analogue type that r...

SKU: AF-2090

The 2.8" TFT LCD Breakout Board features a bright, full-colour display with a capacitive single-touch touchscreen and an onboard MicroSD card socket. With 240×320 resolution and individual RGB pixel control, it delivers vivid colour output for interactive projects. The breakout supports two inte...

SKU: AF-1770

The 2.8" TFT LCD Breakout Board features a bright, full-colour display with a resistive touchscreen and an onboard MicroSD card socket. With 240×320 resolution and individual RGB pixel control, it delivers vivid colour output for interactive projects. The breakout supports two interface modes: 8...

SKU: AF-1947

The 2.8" TFT Touch Shield with Capacitive Touch plugs directly into an Arduino and provides a bright, full-colour display with a smooth glass capacitive touchscreen and onboard MicroSD card socket. Fully assembled and ready to use — no wiring or soldering required. This shield uses SPI for the d...

SKU: AF-1651

The 2.8" TFT Touch Shield with Resistive Touch Screen plugs directly into any Arduino UNO or Mega-shaped board, providing a bright, full-colour display with touch input and an onboard MicroSD card socket. Fully assembled and ready to use — no wiring or soldering required. This shield uses SPI fo...

SKU: EC-AMS320240TFT

The 2.8" TFT Touch Shield V4.3 is an Arduino-compatible display shield featuring a 240×320 colour LCD with a resistive touchscreen and onboard SD card socket. It communicates over SPI, keeping pin usage low and leaving more pins available for other components. Driven by the ILI9341 controller, t...

SKU: PL-1094

A miniature low-power 6V brushed DC gearmotor with a 297.92:1 metal gearbox. With a 10 × 12mm cross section, this micro metal gearmotor delivers useful torque in an extremely compact form factor. The D-shaped output shaft is 3mm in diameter and extends 9mm from the gearbox. Key Features 297.92...

SKU: AF-4262

The 2.9" Flexible eInk Display is a monochrome (black and white) e-paper panel with 296×128 resolution. Once an image is displayed, it remains visible even with all power removed — delivering high-contrast, daylight-readable output that looks like printed paper. The flexible construction allows ...

SKU: LB-LS5508

A 2×AA battery holder with a protective cover, built-in on/off switch, and large alligator clip leads. The alligator clips make it easy to connect to circuits, components, and conductive materials without soldering — ideal for quick prototyping and classroom projects. Key Features 2×AA Capacit...

SKU: AF-245

The 2-Axis Joystick provides analogue input for your projects using two independent 10K potentiometers — one per axis. It reports position as either voltage or resistance, making it compatible with a wide range of microcontrollers including Arduino and Raspberry Pi. The modular form factor plugs...

SKU: EF-EF03004

The 2-Channel 12V Relay Module allows you to control two high-power devices independently using low-voltage signals from a microcontroller such as Arduino. Each channel features an optocoupler-isolated relay with normally open (NO) and normally closed (NC) terminals for flexible switching configu...

SKU: EF-EF03003

The 2-Channel 5V Relay Module allows you to control two high-power devices independently using 5V TTL signals from a microcontroller such as Arduino, PIC, ARM, or MSP430. Each channel features a relay with screw terminals and an LED indicator showing the relay state. The compact modular design m...

SKU: DF-DFR0911

The 2-Channel Level Converter translates 12V signals down to 3.3V using optocoupler isolation, making it easy to interface industrial sensors and PLC signals with 3.3V microcontrollers like Arduino. It supports common anode, common cathode, and differential signal inputs with PNP output (NPN to P...

SKU: DF-DFR0912

The 2-Channel Level Converter translates 12V signals down to 5V using optocoupler isolation, making it easy to interface industrial sensors and PLC signals with 5V microcontrollers like Arduino. It supports common anode, common cathode, and differential signal inputs with PNP output (NPN to PNP c...

SKU: WS-19979

The 2-Channel RS232 Module for Raspberry Pi Pico converts UART signals to RS232 and vice versa using the SP3232EEN transceiver. It plugs directly onto the Pico via the onboard female pin header — no wiring required. The module provides two independent RS232 channels with TVS and ESD diode protec...

SKU: EC-CRF00502C

The 2-Channel RF Remote Control Module is a wireless relay controller operating on 433MHz. It comes with a 3-button RF remote that can toggle each relay independently, making it ideal for wirelessly controlling appliances, lights, motors, and other equipment. The module features high-current lat...

SKU: WS-24468

The Waveshare Barcode Scanner Module (C) is a compact 2D codes scanner module that uses intelligent image recognition to decode 1D and 2D barcodes from both paper and screens with high accuracy and speed. Featuring USB and UART interfaces, the module can be plugged directly into a computer or ea...

SKU: EC-RPA05036T

The 2-in-1 TF Card Dual System Switcher lets you install two MicroSD (TF) cards on a single Raspberry Pi and switch between them using a physical toggle. This allows you to run two different operating systems and swap between them without removing or swapping cards. The switcher can also be cont...