All Products
Showing 381-400 of 11441 products
1872×1404, 10.3inch flexible E-Ink display HAT for Raspberry Pi
A large 10.3" flexible e-ink display HAT for Raspberry Pi, featuring 1872×1404 resolution (~227 DPI) with 2–16 greyscale levels. The flexible panel is thinner and lighter than standard e-Paper displays, and the IT8951 embedded controller enables fast full-page refreshes in under one second with s...
![1.8 Color TFT LCD display with MicroSD Card Breakout [ST7735R]](/rails/active_storage/representations/redirect/BAh7BkkiC19yYWlscwY6BkVUewdJIglkYXRhBjsAVGkCXaNJIghwdXIGOwBUSSIMYmxvYl9pZAY7AEY=--bdd4eb6edf7af97e201625b53d1f8e06888f2929/BAh7BkkiC19yYWlscwY6BkVUewdJIglkYXRhBjsAVHsIOgtmb3JtYXQ6CXdlYnA6EnJlc2l6ZV90b19maXRbB2kCkAFpApABOgpzYXZlcnsHOgxxdWFsaXR5aVc6CnN0cmlwVEkiCHB1cgY7AFRJIg52YXJpYXRpb24GOwBG--f55be79df1f1b025f86d676a642df617e240cfbc/image_cce3d5fb-0096-4fa7-9bc7-6eab02f357ba.jpg)
1.8 Color TFT LCD display with MicroSD Card Breakout [ST7735R]
·
A compact and colourful 1.8" TFT LCD breakout with a built-in microSD card slot, perfect for adding a bright display to any microcontroller project. It communicates over 4-wire SPI and includes its own pixel-addressable frame buffer, so it works with virtually any microcontroller — even those wit...
1.8inch colourful display module for micro:bit, 160x128
A 1.8" colour display module designed for the BBC micro:bit, featuring 160 × 128 resolution and 65K colour support. It plugs directly into the micro:bit edge connector — no soldering required. The module includes onboard 1 Mbit SRAM (23LC1024) used as a display cache, so you won't run into memor...
1.8inch LCD Display Module for Raspberry Pi Pico, 65K Colors, 160×128, SPI
A 1.8" LCD display module designed for the Raspberry Pi Pico, featuring 160 × 128 resolution and 65K RGB colours. It plugs directly onto the Pico via an onboard female pin header — no soldering required. Driven by the ST7735S chip over SPI, this display uses minimal IO pins and comes with C/C++ ...
18k Ohm 1/4W PTH Resistor
·
This through-hole resistor is a handy staple for breadboards, perfboards and general electronics prototyping. It is supplied as a single 18 kOhm metal film resistor with 1/4 watt power rating.The axial PTH format makes it easy to plug into standard solderless breadboards or solder into prototypin...
1.8kΩ ±1% 0.1W SMD Resistor
·
This is a high-precision surface-mount resistor with a resistance of 1.8 kΩ, suited to compact PCB designs where accuracy and consistency matter.With a ±1% tolerance and a 1/10W (0.1W) power rating, it is a practical choice for precision voltage dividers, biasing networks, pull-ups, pull-downs an...
18° Micro Stepper Motor for Arduino
A compact 10 mm micro stepper motor with 18° per step, designed for direct connection to microcontrollers like Arduino and ESP32 without requiring a dedicated driver board. The 2-phase 4-wire bipolar configuration makes it straightforward to integrate into small-scale automation projects. The mo...
1.8 SPI TFT display, 160x128 18-bit color - ST7735R driver
·
A compact 1.8" TFT display with true 18-bit colour (262,144 shades) and 160 × 128 resolution. It uses a simple SPI interface requiring only 4–5 digital pins and features two white LED backlights running on 3.3 V. Driven by the ST7735R chip. This is the raw display panel only — it is not mounted ...
18 Value 900pcs Bipolar Triode Transistor TO-92 A1015-2N5551 Box Kit
A comprehensive assortment of 900 bipolar transistors across 18 different values, all in the standard TO-92 package. Each value includes 50 pieces, neatly organised in a compartmentalised storage box for easy identification and access. The kit includes a balanced mix of NPN and PNP transistors c...
19.5 HDMI Display for Raspberry Pi
A 19.5" HDMI display with 1600×900 resolution, designed for use with Raspberry Pi and other HDMI-equipped single-board computers. The wide-screen format provides ample workspace for desktop use, digital signage, and project displays. Simply connect via HDMI for plug-and-play operation — no addit...
19 in 1 Multi-functional Charging Cable - Banana Plug
This charging cable brings together 19 connector types for RC charging setups, with banana plugs for the charger connection.The selection covers battery connectors, transmitter connectors, a servo connector and a glow ignitor connection, as well as bare leads. Check the connector and polarity req...
1.9" IPS Touch LCD Display – 172x320, SPI/I2C, 262K Colors
·
A 1.9" IPS touch LCD display module with 172 × 320 resolution and 262K colours. It combines an ST7789V2 display driver with a CST816 capacitive touch controller, providing both vivid visuals and responsive touch input in a compact form factor. The module communicates via SPI (display) and I2C (t...
1 Channel 5V Relay Module Arduino Compatible BK008
A single-channel 5 V relay module that allows a microcontroller to switch high-voltage electrical devices up to 250 VAC or 110 VDC. Controlled via a standard TTL-level digital IO pin, it works with Arduino and other popular microcontrollers. The module uses an SRD relay with optocoupler isolatio...
1 Channel Relay 3V Relay Module for Micro:bit
A single-channel 3 V relay module from the ElecFreaks OCTOPUS series, designed for use with the BBC micro:bit. It uses a high-quality HUIKE relay capable of switching loads up to 30 A, making it suitable for controlling home appliances and other high-current devices. The module runs on 3 V power...
1 Channel RF Remote Control Module AC 110V - 220V
A single-channel latching relay module with a 433 MHz RF wireless remote control, designed to switch AC mains-powered appliances and equipment. When powered on, the relay can be toggled via the included two-button wireless controller at distances up to 50 metres. The module features a passive re...
1 Channel RF Remote Control Module DC 5V
A single-channel latching relay module with a 433 MHz RF wireless remote control, powered by DC 5 V. The relay can be toggled via the included two-button wireless controller at distances up to 30 metres, and can also be controlled directly by a microcontroller via the standard interface. The mod...
1-In 6-Out Push-In Wire Connector
·
This push-in wire connector turns a single input connection into six output connections, making it a handy power distribution tool for low-voltage DC wiring.The push-in wiring method makes connections quick and convenient, while the internal conductive spring clamp is designed for firm contact an...
1k Ohm 1 Watt Carbon Film Resistors - Pack of 2
A pack of two 1 kΩ carbon film resistors rated at 1 W continuous power. These through-hole axial resistors feature colour-coded bands for easy identification and solder legs for breadboard or PCB mounting. Specifications Resistance: 1 kΩ Tolerance: ±5% Power Rating: 1 W Type: Carbon film P...
1m LilyPad Supporting Conductive Sewing Thread Wearable
A 1-metre length of soft conductive sewing thread made from stainless steel, designed for wearable electronics projects. Use it to sew electrical connections between LilyPad components, sewable LEDs, and batteries — replacing traditional wires with flexible, stitchable conductors. Key Features ...
1m NTC Thermistor Temperature Sensor 10K 3470
A waterproof NTC thermistor temperature sensor with a 100cm (1 metre) cable and stainless steel probe. The 10KΩ resistance at 25°C and standard B-constant make it easy to read with an Arduino or other microcontroller ADC input — just use a voltage divider with a matching 10K resistor. Key Featur...
