All Products

SKU: AF-5390

Is your house haunted? Or, rather, are you convinced that your house is haunted but have never been able to prove it since you've never had a camera that integrated with your Raspberry Pi Zero but was still small enough that the ghosts wouldn't notice it?Luckily, the Spy Camera for Rasp...

SKU: LB-00249

The Raspberry Pi Zero W Kit is a complete starter package that includes everything you need to get up and running with the Pi Zero W. Pre-loaded with NOOBS on a 32GB microSD card, simply plug in and follow the on-screen setup to start building your project. The Pi Zero W adds built-in WiFi and B...

SKU: AF-3298

One can never have enough socks, or USB ports. Add some more USB capability to your Raspberry Pi Zero with the Zero4U! This is a 4-port USB hub for Raspberry Pi Zero, and it can be mounted back-to-back onto a Pi Zero. The 4 pogo pins on the back will connect the PP1, PP6, P...

SKU: PI-ZERO4U_V1.3

This is a 4-port USB 2.0 hub for Raspberry Pi Zero, and it can be mounted to Raspberry Pi Zero back-to-back. The 4 pogo pins on the back will connect the PP1, PP6, PP22 and PP23 testing pads on Raspberry Pi Zero, hence no soldering will be needed. UPDATE: as of 23rd March 2017 all Zero4U now ...

SKU: RP-SC0038 · MPN: SC0038

The Raspberry Pi Zero Case has been designed to fit both the Pi Zero and the Pi Zero W. These official cases consist of several parts and protect the Raspberry Pi Zero from things like rogue wires that might short it out while still allowing full access to the board. Simply snap the RPi into t...

SKU: LB-ZERO2-HEADER

A Raspberry Pi Zero 2 W with a 40-pin GPIO header professionally soldered by our team in Sydney. All the power of the Pi Zero 2 W — ready to use with HATs, pHATs, and breadboards straight out of the box, no soldering required. The Raspberry Pi Zero 2 W features a quad-core 64-bit ARM Cortex-A53 ...

SKU: LB-PT-30CM

A 30 cm flat flex cable (FFC) for extending the connection between a Raspberry Pi and its camera module. Use this when the standard 15 cm cable is too short for your enclosure or mounting position. Key Features 30 cm Length – Twice the length of the standard camera cable 15-Pin FFC – Compatib...

SKU: LB-ZERO2-KIT

The Pi Zero 2 W Kit includes the essentials for getting started with the Pi Zero W, including: Raspberry Pi Zero 2 W Mini HDMI to regular HDMI adapter  Micro USB to regular USB adapter A Pi Zero W Camera Connector 32GB MicroSD (Pre-loaded with NOOBS) A Pi Zero Case with Camera Enclosure ...

SKU: DF-SEN0632 · MPN: SEN0632

##Introduction The IMX378-79 Camera Module is a cutting-edge imaging solution designed to deliver exceptional performance in industrial applications. Built with the Sony IMX378 photosensitive chip, it offers ultra-high 12.3MP resolution (4056x3040) and a precise 79° field of view, ensuring crysta...

SKU: PI-CAM008

Light up the night with this night vision camera module with infra-red LEDs, for Raspberry Pi! Available with ether a standard (70°) or a wide-angle (160°) lens, this camera has IR LEDs that allow the camera to see in the dark without producing visible light. The camera itsel...

SKU: PI-RPI-020

The Official Raspberry Pi Zero Case is designed to fit both the Pi Zero and Pi Zero W. It ships with three interchangeable lids so you can configure it for different use cases: a plain lid for a clean finish, a GPIO lid for header access from above, and a camera lid with a short ribbon cable for ...

SKU: AF-2883

The Adafruit Pi Protector for Raspberry Pi Zero is a minimal, crystal-clear acrylic protector that keeps your pocket-sized Pi Zero safe without adding bulk. Just two acrylic pieces secured with four screws — sleek, lightweight, and perfect for carrying in your pocket. All edge connectors remain ...

SKU: ET-RASPBERRY-PI-ZERO-KIT-

Get in quick to secure yours.  The Kit includes Pi Zero board + 1x Mini HDMI to HDMI adapter & 1x Micro USB "On the Go" adapter. This new ultra-slim Raspberry Pi board builds upon the success of the first Raspberry Pi Zero by adding a fine-pitch FPC connector that we use on the Compute Modul...

SKU: AF-4523

A simple 40-pin FFC/FPC extender that connects two 0.5mm pitch flexible flat cables end-to-end, extending the total cable length. Ideal for reaching between components that are further apart than a single cable allows. The extender uses two ZIF (zero insertion force) connectors. Carefully pry th...

SKU: AF-1937

Is your house haunted? Or, rather, are you convinced that your house is haunted but have never been able to prove it since you've never had a camera that integrated with your raspberry pi but was still small enough that the ghosts wouldn't notice it?Luckily, the Spy Camera for Raspberry Pi is ...

SKU: AF-5026

This mounting plate kit is an affordable, simple solution to mounting your Raspberry Pi 4 or Model 3 B+ to your Raspberry Pi HQ Camera.  Easy to assemble, the plate attaches to your HQ Camera on one side, and your Raspberry Pi mounts to the other side – spacers and fixings are incl...

SKU: SF-SEN-21276

The Arducam 64MP Autofocus Camera Module brings smartphone-grade imaging to the Raspberry Pi ecosystem. With a 64MP sensor capable of capturing 9152 × 6944 still images and autofocus for sharp results, this module fits the standard Raspberry Pi camera form factor and connects via MIPI CSI-2 ribbo...

SKU: SF-DEV-15470

The credit-card-sized computer has become even smaller! The Raspberry Pi Zero W is still the Pi you know and love, but at a largely reduced size of only 65mm long by 30mm wide and now with headers! With the addition of wireless LAN and Bluetooth, the Raspberry Pi Zero W is ideal for making embedd...

SKU: AF-4728

A replacement CSI/DSI flex connector for the Raspberry Pi. If the camera or display connector on your Pi has been damaged — snapped arms, broken latch — this part lets you rework it rather than replacing the entire board. The same connector is used for both the Camera (CSI) and Display (DSI) por...

SKU: PR-PIM595

Protect your Pi Zero 2 W in style with the Pibow Zero 2 W case, in calming violet waters - ocean blue, purple, and deep blue! Note: this case is for the Raspberry Pi Zero 2 W only. This case is not compatible with the Pi Zero or the original Pi Zero W. Does not include a Raspberry Pi Zero 2 W! ...