All Products
Showing 21-40 of 100 products
Gravity: I2C LCD1602 Arduino LCD Display Module (Blue)
The Gravity I2C LCD1602 is a 16×2 character LCD display module with a blue backlight and white text. It communicates over I2C, requiring only two data pins instead of the many parallel connections of a traditional LCD1602. The module is compatible with both 3.3V and 5V systems, and the contrast i...
Gravity: I2C LCD1602 Arduino LCD Display Module (Gray)
The Gravity I2C LCD1602 is a 16×2 character LCD display module from DFRobot's Gravity series, redesigned with a clean modern look and simplified I2C interface. It eliminates the need for contrast adjustment, retains backlight control, and is compatible with both 3.3 V and 5 V systems — making it ...
RP2040-LCD-0.96, a Pico-like MCU Board Based on Raspberry Pi MCU RP2040, with LCD
RP2040-LCD-0.96 is a low-cost, high-performance Pico-like MCU board with flexible digital interfaces. It incorporates Raspberry Pi's RP2040 microcontroller chip, as same as the one on Raspberry Pi Pico. For software development, either Raspberry Pi's C/C++ SDK, or the MicroPython is available...
ESP32-S3 Touch LCD 2.8C 2.8in Round Display Board
·
This compact ESP32-S3 development board combines a 2.8 inch round IPS LCD with touch control, WiFi and Bluetooth BLE 5, making it a handy platform for HMI, dashboard and embedded GUI projects.It uses an Xtensa 32-bit LX7 dual-core processor and includes onboard Flash and PSRAM, so it can smoothly...
2.8 TFT Display - 240x320 with Capacitive Touchscreen
·
The 2.8" TFT Display is a bare LCD module with a capacitive single-touch touchscreen. Featuring 240×320 resolution with individual RGB pixel control and a bright 4-LED backlight, it delivers vivid full-colour output for custom projects. The display is driven by the ILI9341 chipset and the touchs...
Adafruit TSC2007 I2C Resistive Touch Screen Controller
·
The Adafruit TSC2007 is an I2C resistive touch screen controller that offloads touch reading from your microcontroller. Instead of using multiple analog pins and constant polling, the TSC2007 handles all the touch sensing over a simple I2C connection and provides an interrupt pin that signals whe...
1.47" LCD Touch Display Module – 172x320 IPS, SPI/I2C, 262K Colors
·
A compact 1.47-inch IPS LCD display module with an integrated capacitive touch panel. Featuring 172×320 resolution and 262K colours, it delivers crisp, vibrant visuals with wide viewing angles in an ultra-small form factor (22.05 × 41.69 mm). Built around the JD9853 display driver (SPI) and AXS5...
7 Segment LED Keypad Shield For Arduino
An Arduino-compatible shield featuring a 4-digit 7-segment digital tube display (common cathode, 0.56") with 5 input buttons. Uses I2C to drive the display, providing an easy interface for menus, controls, and numeric readouts. The five onboard buttons (active on pin A0) can serve as menu select...
Adafruit RGB Negative 16x2 LCD+Keypad Kit for Raspberry Pi
·
The Adafruit RGB Negative 16×2 LCD + Keypad Kit is a Pi Plate that combines a 16×2 character LCD with RGB backlight and a 5-button keypad, all controlled over I2C using just two pins. The negative-style display shows light text on a coloured background, giving a crisp, high-contrast appearance. ...
Adafruit RGB Positive 16x2 LCD+Keypad Kit for Raspberry Pi
·
The Adafruit RGB Positive 16×2 LCD + Keypad Kit is a Pi Plate that combines a 16×2 character LCD with RGB backlight and a 5-button keypad, all controlled over I2C using just two pins. The positive-style display shows dark text on a coloured background for a classic, easy-to-read look. By using a...
Gravity: I2C 16x2 Arduino LCD with RGB Backlight Display
A 16×2 character LCD module with full RGB backlight, communicating over I2C for minimal wiring. With support for 16 million backlight colours, this display adds a vibrant, customisable readout to your Arduino or compatible microcontroller projects using just four wires: VCC, GND, SDA, and SCL. P...
SparkFun Red Vision Touch Display for Pico - SparkFun Electronics
·
The SparkFun Red Vision Touch Display for Pico features a 2.0", 320x240px capacative touch LCD mounted on a breakout board designed to plug directly into the Control Board on the Experiential Robotics Platform (XRP) Kit as well as Raspberry Pi Picos. This display board includ...
RP2350-GEEK Board with 1.14" Color LCD and USB Debugging
·
The Waveshare RP2350-GEEK is a compact development board built around the Raspberry Pi RP2350 microcontroller, featuring a built-in 1.14-inch colour LCD and CMSIS-DAP debug probe. It serves as both a standalone development platform and a USB debugger for other ARM-based microcontrollers. The boa...
1.9" IPS Touch LCD Display – 172x320, SPI/I2C, 262K Colors
·
A 1.9" IPS touch LCD display module with 172 × 320 resolution and 262K colours. It combines an ST7789V2 display driver with a CST816 capacitive touch controller, providing both vivid visuals and responsive touch input in a compact form factor. The module communicates via SPI (display) and I2C (t...
Display-O-Tron LCD
This is the lovely little 16 x 3 character LCD we use on Display-O-Tron.A super-slim alternative to the classic industrial character displays. This model has a transparent display allowing you to add your own back-light if you wish! High-contrast LCD display 3 x 16 characters (3.6mm character hei...
TIMI-96 Starter Kit
·
TIMI-96 is a breadboard-compatible display development module designed to make electronics testing, prototyping and education quicker and neater. It can be used stand-alone, driven by a host, tethered to a PC, or built into development projects.The module combines a 0.96” TFT LCD with a PIXXI-28 ...
Gravity: I2C LCD1602 Arduino LCD Display Module (Green)
A 16×2 character LCD display module from DFRobot's Gravity series, connecting to your Arduino or microcontroller via a simple I²C interface — just two data wires instead of the many parallel connections a standard LCD1602 requires. Compatible with both 3.3V and 5V, with no contrast adjustment nee...
Adafruit 1.8 Color TFT Shield w/microSD and Joystick
·
The Adafruit 1.8" Colour TFT Shield is a plug-and-play display solution for Arduino, combining a bright 128×160 pixel TFT screen with a microSD card slot, 5-way joystick navigation switch, and three tactile buttons. This R3-format shield works with any Arduino or Metro board including the Metro M...
3.5in 320x480 Capacitive Touch TFT Breakout Board
·
This colour touchscreen LCD gives your project a bright, high-resolution interface with a 3.5" diagonal TFT panel and capacitive touch already attached. With 480x320 pixels and individual RGB pixel control, it offers far more display space than small monochrome screens.The onboard display control...
7inch DSI Capacitive Touch Display, 1280 × 800, IPS, Optical Bonding Toughened Glass Panel
Add a crisp, touch-enabled screen to your Raspberry Pi project with this 7-inch IPS DSI display from Waveshare. The 1280 × 800 panel, wide 178° viewing angle and 10-point capacitive touch make it well suited to dashboards, control panels, kiosks, home automation interfaces and portable Raspberry ...
