All Products

SKU: SS-104020108 · MPN: 104020108

Several kinds of LED Strips have already been available in our bazaar for a long time, however, there were no Grove compatible LED strips. Now, we recommend the Grove - WS2813 RGB LED Strip Waterproof series for you.This series products are awesome, and have three significant advantages over othe...

SKU: M5-A042

Description NEOFLASH is a RGB LED panel with 192 RGB LED(24x8). When you program this Unit, please pay attention to the sequence of the Neopixels. From top left (Where PIR placed) to right, and top to bottom. Connect this unit with M5Core via GROVE PORTB Single-Bus. We put Magnet on the bac...

SKU: M5-U058

The OP.180 is an infrared reflective limit switch unit built around the ITR9606 sensor, which pairs an infrared emitting diode with a silicon phototransistor in a 180° (straight-through) orientation. When an object passes between the emitter and receiver, the IR beam is broken, triggering a digit...

SKU: M5-U004

Description PIR is used to measure infrared (IR) light radiating from objects in its field of view. PIR sensors are commonly called simply "PIR", or sometimes "PID", for "passive infrared detector". The term passive refers to the fact that PIR devices do not radiate energy for detection p...

SKU: M5-U025

Description Dual Button, as its namesake, has two buttons with different color. If the Button unit is not enough, how about double it up to a pair. They share the exact same mechanism, button status can be detected by the input pin status,simply capture the high/low electrical level. This unit...

SKU: M5-U022

The M5Stack Proto Unit is a compact universal prototyping board designed for the M5Stack ecosystem. It connects to an M5Stack Core via the Grove port, giving you the freedom to build custom circuits and add-ons for your projects on a standard 2.54mm pitch perfboard. Key Features 70 Through-Hol...

SKU: M5-U023

Description RELAY, as its namesake, is a M5Unit that implenments a Relay functions. Relay can be used as an electrically operated switch, uses an electromagnet to mechanically operate a switch,to where it is necessary to control a large power load circuit by a separate low-power signal, like a...

SKU: M5-U026

The M5Stack 16-Key Capacitive Touch Unit is a Makey Makey-inspired input device built around an ATmega328P microcontroller. It detects capacitive touch across 16 key pads, allowing you to turn everyday objects — fruit, foil, water, or anything conductive — into touch-sensitive buttons. A built-in...

SKU: M5-A035-E

A 200 cm extendable RGB LED strip using digitally addressable WS2811 NeoPixel LEDs with a Grove connector. Each LED can display its own colour and brightness independently, and multiple strips can be daisy-chained together to create longer displays. Compatible with M5Stack units via the Grove A ...

SKU: M5-U008

The FINGER Unit (FPC1020A) is an all-in-one capacitive fingerprint sensor with built-in fingerprint registration, verification, and management. It communicates via UART and connects to M5Stack devices through the Grove C port. Configurable security levels and fast matching make it suitable for bi...

SKU: M5-U029

Description HEART is build with MAX30100.. MAX30100 is a complete pulse oximetry and heartrate sensor system solution designed for the demanding requirements of wearable devices. The MAX30100 provides very small total solution size without sacrificing optical or electrical perform...

SKU: M5-A035-C

A 50 cm addressable RGB LED strip unit with digitally controllable NeoPixel (WS2811) LEDs. Each LED can display any RGB colour and brightness individually via a single-bus protocol. The strip connects via a Grove cable and is extendable — multiple strips can be daisy-chained together for longer d...

SKU: M5-K008

 Description In comparision,**PROTO function Module** includes more stuff than PROTO Board.Other than the PROTO board, it also comes with a DHT12(temperature and humility sensor), M-BUS Socket and more. PROTO Board is a pure universal prototype perboard. You can have the total free...

SKU: SS-110010044

The Grove Starter Kit for Seeed Studio XIAO bundles the XIAO Expansion Board with 9 Grove modules and additional components, providing a complete introduction to the XIAO development platform. Designed for beginners, it comes with free online courses to help you get started quickly. The kit cove...

SKU: M5-A046

1. Grove to GroveGROVE 2 GROVE is a GROVE extension connector. Two female GROVE port sit back-to-back.  One common use of this part is for the RGB LED strip extension. Feature:GROVE-to-GROVERGB LED strip extensionpackage includes: 5x connector2. Grove to PinGROVE 2 PIN is a GR...

SKU: EF-EF11097

Specially designed to connect to Grove sensors, can be used on sensor:bit, octopus:bit, or other expansion boards. Used to connect IIC devices

SKU: EF-EF11096

Specially designed to connect to seeed studio sensors, seeed Sudio sensors can be used on sensor:bit, octopus:bit, Wukong or other expansion boards. Only ordinary seeed studio sensors can be connected, IIC devices can not be used.

SKU: AF-4970 · MPN: 4970

I²CMini is an easy-to-use, open-source tool for controlling I²C devices over USB, 100% compatible with I²CDriver. Its a small friend that will make working with I2C a breeze, especially if they have a Qwiic/Stemma QT or even Grove I2C connector! USB to I²C interface in a tiny 18x18mm board Can a...

SKU: AF-6318 · MPN: ADA6318

This driver board makes it much easier to control multiple solenoids from a microcontroller over I2C. It uses an MCP23017 GPIO expander so you do not need to dedicate lots of pins just to switch a bank of clicky, inductive loads.Solenoid power connects through the centre terminal blocks, with eac...

SKU: AF-4026 · MPN: 4026

The Adafruit STEMMA Soil Sensor uses capacitive measurement to detect soil moisture — a more durable approach than resistive sensors that corrode over time. With a single probe and no exposed metal, it avoids oxidation issues and won't introduce DC currents into your plants. The ATSAMD10 microco...