All Products

SKU: SF-TOL-18471 · MPN: TOL-18471

These metric threaded inserts are handy for creating strong, reusable fixing points in jigs, fixtures, wasteboards and other work-holding setups.Install a few in strategic locations to clamp down material, or set them out in a grid pattern to turn a wasteboard into a threaded table. Installation ...

SKU: SF-TOL-15950 · MPN: TOL-15950

This flat mill is made for roughing or machining flat and prismatic parts, giving you a straightforward cutter for CNC work where a flat-bottomed cut is required.It is suited to cutting plastic and aluminium, particularly on small CNC machines such as the Nomad or Shapeoko.If you are using a Shap...

SKU: SF-TOL-18468 · MPN: TOL-18468

These low-profile stainless steel stops are designed for workholding on Nomad and Shapeoko CNC machines. Use them as hard stops to help locate and secure your job during milling.They are intended to work with Tiger Claw clamps, in either Standard or Compact versions, as well as Gator Tooth clamps...

SKU: SF-PRT-19797 · MPN: PRT-19797

Keep your Carbide Compact Router running with this replacement brush set. It is intended for users putting plenty of machining time on their router and needing service parts on hand.The set includes two replacement brushes, handy for maintaining your router so you can get back to cutting, carving...

SKU: SF-TOL-19768 · MPN: TOL-19768

These V-bit cutters are made for engraving intricate patterns and fine details, especially where a sharp 90° V profile is useful. They work well with the V-carve feature in Carbide Create for sign making, decorative engraving and detailed CNC work.Each pack includes two cutters. The bits use an H...

SKU: SF-TOL-19767 · MPN: TOL-19767

These flat end mill cutters are suited to roughing operations and machining flat or prismatic parts on a compatible CNC mill.The pack includes two cutters, each with a 0.25" shank and 0.25" flute diameter. They are solid carbide tools with two flutes and no coating.If you are using these with a N...

SKU: SF-TOL-19766 · MPN: TOL-19766

These flat end mills are made for roughing and machining flat or prismatic parts on a compatible CNC mill or router.Each pack includes two cutters, giving you a spare for workshop use or a matched pair for repeat jobs. The tools use a 0.125" shank and 0.125" flute diameter, making them suitable f...

SKU: SF-TOL-25937 · MPN: TOL-25937

This wood surfacing cutter is made for CNC work where you want to flatten a wasteboard or put a clean finish on end grain timber projects. Its razor-sharp, indexable carbide tips are suited to making light work of lumber on compatible machines.Each bit comes with 4 indexable inserts, so the cutti...

SKU: SF-TOL-25930 · MPN: TOL-25930

This clamp set is made for reliable workholding on compatible CNC and machining setups. The clamps are heavy-duty, moulded from glass-filled nylon, and designed to be quick to remove thanks to magnetic actuation.The Crush-It Essentials and Stops are reinforced with stainless steel hardware, makin...

SKU: SF-TOL-19752 · MPN: TOL-19752

BitRunner lets Carbide Motion control power to your CNC router, so you do not need to reach for the router’s power switch when a program ends or a tool change is required.This V2 Deluxe version adds a lockout pendant, allowing you to manually disable the router during bit changes for additional s...

SKU: AF-1750

The Synthetos gShield (formerly grblShield) V5 is a 3-axis CNC stepper motor driver shield for Arduino. Designed as a complete hardware companion for the grbl CNC motion control firmware, it turns an Arduino Uno into a capable CNC controller for mills, routers, laser cutters, and other motion-con...

SKU: DF-FIT1034 · MPN: FIT1034

This compact three-phase brushless DC motor is built for advanced motion control projects where smooth torque, low noise and precise feedback matter. It runs at a rated 12V and combines a 2804 BLDC motor with a built-in AS5600 magnetic encoder for closed-loop control.The integrated encoder provid...

SKU: DF-DFR1221 · MPN: DFR1221

Build compact visual interfaces, IoT dashboards and voice-enabled projects around an ESP32-S3R8 module with an integrated circular touchscreen. The board combines processing, display, touch, wireless connectivity, audio and power features into a single development platform.The 1.85-inch round TFT...

SKU: PL-1528

A compact SPDT snap-action switch (microswitch) with a 13.5mm lever arm. The satisfying tactile "click" provides clear feedback when activated, making it perfect for limit switches, bump sensors, and user interfaces. The three-pin SPDT configuration gives you access to both normally-open (NO) an...

SKU: PL-4745

A high-torque 100:1 brushed DC gearmotor from Pololu's 37D series — the largest and most powerful in their range. Measuring 37mm (1.46") in diameter and 57mm long, this 12V motor delivers substantial torque for robotics and mechanical projects. The gearbox uses helical gears for the first stage,...

SKU: RASPBERRY-PI-MEDIA-KIT-2

This exclusive Raspberry Pi 4 Model B Media Centre Kit from Australia's Little Bird includes everything you'll need to get streaming with your Raspberry Pi! Your new Desktop Computer Faster than ever, the new Raspberry Pi 4 Model B is now equipped with the latest Broadcom System on a Chi...

SKU: RASPBERRY-PI-MEDIA-KIT-4

This exclusive Raspberry Pi 4 Model B Media Centre Kit from Australia's Little Bird includes everything you'll need to get streaming with your Raspberry Pi!Your new Desktop ComputerFaster than ever, the new Raspberry Pi 4 Model B is now equipped with the latest Broadcom System on a...

SKU: RASPBERRY-PI-STARTER-KIT-2

Due to stock shortages there is now a limit of 1 kit per person. This exclusive Raspberry Pi 4 Model B Starter Kit from Australia's Little Bird includes everything you'll need to get up and running within minutes! Your new Desktop Computer Faster than ever, the new Raspberry Pi 4 Model B is ...

SKU: RASPBERRY-PI-STARTER-KIT-4

This exclusive Raspberry Pi 4 Model B Starter Kit from Australia's Little Bird includes everything you'll need to get up and running within minutes! Your new Desktop Computer Faster than ever, the new Raspberry Pi 4 Model B is now equipped with the latest Broadcom System on a Chip that provi...

SKU: LB-PT2019B

The Armour Case for Raspberry Pi 4 is CNC machined out of Aluminium and acts as a giant heat sink that cools down your Raspberry Pi! The open dual fan design keeps air moving across the Raspberry Pi with little noise and without affecting Wi-Fi and Bluetooth signals! The fans on this case are...