All Products
Showing 21-40 of 74 products
Sewable Snaps - 5mm Diameter - Card of 24
·
Tin-plated brass sewable snaps in a compact 5 mm diameter, ideal for wearable electronics. Solder one side to a PCB pad and sew the other to your project with conductive thread for a detachable electrical connection. Each card contains 24 complete snap pairs (socket and stud). Key Features 5 m...
3 Pin 0.1 Header with Crimp Pins - 2.54 pitch
A 3-pin single-row crimp connector housing with 2.54 mm (0.1") pitch, designed for PCB-to-PCB or cable-to-PCB connections. The white nylon wafer housing features locking and polarising, with tin-plated brass pins that protrude 3.4 mm for PCB soldering. Housings can be butted end-to-end to form l...
210-Piece Brass Standoff Kit
·
Keep your electronics bench ready for the next enclosure, PCB stack or prototype with this 210-piece brass standoff kit. It covers two common PCB hardware sizes, M3 and M2.5, with a mix of standoff heights, nuts, screws and washers.The assortment includes both female/female and male/female stando...
Servo - Hitec HS-85MG (Micro Size)
The Hitec HS-85MG packs impressive torque into a micro-sized package. With metal gears and a single ball bearing, this servo delivers up to 3.4 kg·cm (48.6 oz·in) of torque at 6V while weighing just 21.9 g — making it an excellent choice for compact robotics, RC models, and mechatronic projects. ...
Servo - Generic High Torque (Standard Size)
A reliable, high-torque standard-size servo (FS5106B) with dual ball bearings and nylon gears. Delivering up to 83.47 oz-in of torque at 6V with a speed of 0.16 sec/60°, it's a versatile choice for robotics, RC, and mechatronics projects. Features a standard 3-pin power and control cable with 18...
MC Etcher Diamond Drag Bit Combo Pack
·
Designed for CNC drag engraving, MC Etcher uses a diamond-coated, spring-loaded tip to etch fine lines into the surface of your material. It is suited to composites, metals and glass, creating an engraved pattern by dragging rather than cutting with flutes like a standard endmill.Important: drag ...
Switch Tgl Mini CTR-OFF DPDT MOM
A miniature DPDT toggle switch with a momentary-off-momentary (mom–off–mom) action. The toggle springs back to the centre-off position when released from either direction, making it suitable for joystick-style controls, motor direction switching, and momentary signal routing. Features solder tag...
Ring Inductive Proximity Sensor (8mm Hole Diameter)
These Inductive Ring Proximity sensors are designed to detect metal objects entering or passing through the ring. They operate on a 6-36V power supply and offer NPN output. The sensor features less than 1ms response time, high accuracy, and stable performance, which could work well even in the de...
Ring Inductive Proximity Sensor (6mm Hole Diameter)
These Inductive Ring Proximity sensors are designed to detect metal objects entering or passing through the ring. They operate on a 6-36V power supply and offer NPN output. The sensor features less than 1ms response time, high accuracy, and stable performance, which could work well even in the de...
Ring Inductive Proximity Sensor (3mm Hole Diameter)
These Inductive Ring Proximity sensors are designed to detect metal objects entering or passing through the ring. They operate on a 6-36V power supply and offer NPN output. The sensor features less than 1ms response time, high accuracy, and stable performance, which could work well even in the de...
Ring Inductive Proximity Sensor (10mm Hole Diameter)
These Inductive Ring Proximity sensors are designed to detect metal objects entering or passing through the ring. They operate on a 6-36V power supply and offer NPN output. The sensor features less than 1ms response time, high accuracy and stable performance, which could work well even in the det...
Ring Inductive Proximity Sensor (15mm Hole Diameter)
These Inductive Ring Proximity sensors are designed to detect metal objects entering or passing through the ring. They operate on a 6-36V power supply and offer NPN output. The sensor features less than 1ms response time, high accuracy and stable performance, which could work well even in the det...
Ring Inductive Proximity Sensor (12mm Hole Diameter)
These Inductive Ring Proximity sensors are designed to detect metal objects entering or passing through the ring. They operate on a 6-36V power supply and offer NPN output. The sensor features less than 1ms response time, high accuracy and stable performance, which could work well even in the det...
Ring Inductive Proximity Sensor (30mm Hole Diameter)
These Inductive Ring Proximity sensors are designed to detect metal objects entering or passing through the ring. They operate on a 6-36V power supply and offer NPN output. The sensor features less than 1ms response time, high accuracy and stable performance, which could work well even in the det...
Brass Liquid Solenoid Valve - 12V - 1/2 NPS
·
Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition to your robotic gardening, aquarium, or pool project. There are two 1/2" (Nominal NPS) outlets. Normally, the valve is closed. When 12VDC is applied to the two terminals, the valve opens and wa...
Power Distribution Bus - 7 x 6mm diameter solid brass
·
This power distribution bus is machined from a single piece of solid brass, providing a reliable way to distribute power across multiple wires in a project. Seven screw-terminal holes accept wires of 20 AWG or larger (up to 6 mm diameter), making it well suited for robotics, LED pixel grids, and ...
Brass Sponge
This is a brass sponge that will help clean your soldering iron tip. Use it to remove residue from your iron tip before soldering. It cleans better than conventional sponges and will not damage your iron tip. Made of low abrasive brass shavings and requires no water. Works well as a replacemen...
Dual Phono Connector for pHAT DAC
A dual RCA phono connector designed to pair with the Pimoroni pHAT DAC for Raspberry Pi. Simply place it into the landing pads on the PCB and solder for a clean analogue audio output. Key Features Colour-Coded Channels – Red (right) and white (left) for easy identification Through-Hole Termin...
Micro Metal Gearmotor 50:1
The Micro Metal Gearmotor 50:1 is a compact, high-quality DC motor with an integrated metal gearbox, ideal for small robotics and motorised projects. With a 50:1 gear ratio, it delivers a good balance of speed (260 RPM) and torque at 6V. The motor features a long D-shaped metal output shaft (9.2...
Micro Metal Geared motor w/Encoder- 6V 105RPM 150:1
INTRODUCTION A new micro metal gear motor with a difference! This motor comes with a built-in encoder which measures the motor's speed in real time. The average output number of pulses can reach up to 7*2*150 pulses per revolution. The motor has a long (0.354"/9.0 mm...
