All Products

SKU: DF-DWG0003

A frosted milky-white acrylic base plate for the Arduino UNO and Leonardo. The base mounts underneath the board using nylon standoffs, protecting the underside from contact with work surfaces and giving your setup a clean, professional look. Made from high-quality double-sided frosted acrylic wi...

SKU: PL-2510

Overview A Zumo robot preparing to attack a Parallax SumoBot. Zumo Robot for Arduino, v1.2. This Zumo robot is a low-profile tracked robot platform intended for use with an Arduino (or compatible device, such as an A-Star 32U4 Prime) as its main controller. It measures less than 10 ...

SKU: LB-00056

The Funduino UNO R3 is an Arduino Uno-compatible development board based on the ATmega328 microcontroller. It is functionally identical to the Arduino Uno R3, featuring the ATmega16U2 USB controller, SDA and SCL pins next to the AREF header, and an accessible reset button near the USB connector. ...

SKU: YH-6000100024

The UNO R3 is an ATmega328P-based microcontroller board with a CH340G USB-to-serial chip, making it a reliable and affordable option for learning electronics and building Arduino projects. Simply connect it to your computer via the included USB cable, upload your sketch, and start creating. With...

SKU: YH-6000300083

This is an expansion board suitable for two-wheel self-balancing robot car. The overall layout is reasonable, and the screw-copper holes are designed in all four corners. The Uno control board can be installed on the back, and the front side supports the various modules required to build a balanc...

SKU: YH-6000100213

An I/O expansion shield for the Arduino UNO R3 that breaks out every pin with its own VCC and GND, making it simple to connect multiple sensors and modules simultaneously. Stacks directly on top of the UNO with both female sockets and pin headers available for flexible wiring with male or female ...

SKU: YH-6000200061

The Yahboom 4WD Smart Robot is a fully featured Arduino-based robotics kit built around the Arduino UNO R3 controller. The aluminium alloy chassis with four-wheel drive and metal motor brackets provides a sturdy platform for learning robotics, sensor integration, and programming. Most components...

SKU: EC-ARS03218S

The board is designed for beginners in Arduino, with various components available that makes you build more than 10 projects easily. You won’t have to solder or connect anything at all, just plug it in a shield and start coming up with various simple examples rather than dealing with cables, sens...

SKU: SF-DEV-18426

The MyoWare® 2.0 Arduino Shield is designed to easily connect up to six MyoWare 2.0 Muscle Sensors and Link Shields using 3.5mm TRS-to-TRS audio cables. The board comes pre-populated with male headers so all you would need to do is stack it on your Arduino and connect the sensors to read up to si...

SKU: SF-DEV-15123

The SparkFun RedBoard Qwiic is an Arduino-compatible development board in the UNO R3 form factor with a built-in Qwiic connector for solderless I2C hookup. It programs over USB Micro-B using the Arduino IDE — select "Arduino UNO" from the board menu and you're ready to go. Key improvements over ...

SKU: SF-DEV-18158 · MPN: DEV-18158

This Arduino-compatible development board keeps the familiar Uno-style layout while adding a few genuinely handy upgrades for modern projects. Built around the ATmega328P, it works with the Arduino IDE and fits the Uno R3 footprint, so it is a straightforward choice if you want broad compatibilit...

SKU: EC-ELE18714S

A complete beginner's kit for getting started with Arduino. Built around the UNO R3 development board, this kit bundles everything you need for your first electronics and programming projects — LEDs, resistors, a breadboard, jumper wires, buttons, sensors, and more, all in one package. Fully com...

SKU: DF-DRI0009

The DFRobot 2×2A DC Motor Shield uses the L298P dual full-bridge driver chip to control two DC motors at up to 2 A per channel. It stacks directly onto Arduino Uno and Arduino Mega boards, using PWM pins 5 and 6 for speed control and digital pins 4 and 7 for enable/disable. The shield can be pow...

SKU: AF-2590

The Adafruit Metro Mini 328 packs the same ATmega328P power as a full-sized Metro into a tiny breadboard-friendly form factor. Running at 16 MHz with 5V logic, it's pin-compatible with Arduino UNO R3 and works with the Arduino IDE by selecting "Arduino UNO" in the Boards menu. For the latest revi...

SKU: DF-DFR0100

INTRODUCTION Welcome to the electronic interaction world! DFRobot proudly presents the Arduino Beginner/Starter Kit for those who are interested in learning about Arduino and electronics. Starting from basic LED control to more advanced environmental sensing, monitoring and actuators. This ki...

SKU: DF-ROB0102

The Cherokey 4WD arduino mobile robot is a versatile mobile robot jeep compatible with the most popular microcontrollers like DFRduino UNO R3 - Arduino Compatible, Mega2560 (arduino microcontroller board), Romeo V2(an Arduino Robot Board (Arduino Leonardo) with Motor Driver)...etc. Cherokey e...

SKU: AF-2488

The Adafruit METRO 328 is a fully assembled, Arduino UNO R3-compatible development board powered by the ATmega328P running at 16 MHz. It's shape and pin-compatible with Arduino UNO R3 shields, and works directly with the Arduino IDE by selecting "Arduino UNO" in the Boards menu. This version come...

SKU: SF-KIT-13154

The SparkFun Inventor’s Kit (SIK) is a great way to get started with programming and hardware interaction with the Arduino programming language. The SIK includes everything you need to complete 16 circuits that will teach you how to read sensors, display information on an LCD, drive motors, an...

SKU: LB-LR0064

The KnockOffDuino® Uno is functionally the same as the Arduino Uno R3 at a fraction of the cost. It is the Arduino for beginners and 100% Uno compatible, however it uses the CH340G usb to serial chip instead of the 16u2/8u2 found in the official Arduino Uno R2/R3 so instead of the Arduino Uno ...

SKU: EC-ELE18721S

An Arduino UNO R3 compatible development board from Elecrow, built around the ATmega328P microcontroller with an ATmega16U2 for USB communication. Fully compatible with the Arduino IDE and the vast ecosystem of Arduino shields, libraries, and tutorials — a great starting point for learning electr...