All Products

SKU: EC-MCA03328M

This Pro Mini version is 100% compatible with the original Arduino Pro mini. We add two analog IO - A6, A7 , and Power Input side add auto recovery insurance, and be allowed USB and Power Supply at same time.It is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input...

SKU: WS-21738

The CM4-Duino is an Arduino-compatible base board for the Raspberry Pi Compute Module 4. It breaks out the CM4's key interfaces — HDMI, USB, M.2 NVMe, camera, and GPIO — in a compact form factor with Arduino-style pin headers, bridging the Raspberry Pi and Arduino ecosystems. The board includes ...

SKU: DF-DFR0972

The Gravity I2C 4-20mA DAC Module outputs 0–25 mA of current controlled via I2C, with high-accuracy 4–20 mA output available after calibration (0.2% linearity error). Built around the GP8302 chip, it provides 12-bit resolution and is compatible with Arduino, enabling precise current-loop control ...

SKU: DF-DFR0064

The DFRobot 386AMP audio amplifier module is based on the LM386 low-voltage audio power amplifier IC. With a fixed voltage gain of 26 dB (20× amplification) and static power consumption of only 24 mW at 6V, it's well suited for battery-powered applications. Connect a microphone, MP3 module, or o...

SKU: DF-DFR0065

This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings ...

SKU: DF-TEL0092

Wifi Bee-ESP8266 is a Serial-to-WIFI module using XBEE design in a compact size, compatible with XBEE slot, applicable to a variety of 3.3V single-chip system. It can be used for Arduino, wireless data transfer, remote control. On-board switch can be used to easily select the Startup module...

SKU: TB-XC4502

This compact TP4056-based module charges a single lithium cell from a 5V USB supply. With charge state LEDs and both mini-USB and solder tab inputs, it's an easy way to add rechargeable battery capability to your projects. Pair it with a DC-to-DC boost converter to create a device that runs on a...

SKU: TB-XC4488

This MOSFET driver module lets you control high-power 24V DC loads from an Arduino or other 3.3V/5V microcontroller. It accepts PWM input for variable speed or brightness control, making it ideal for driving DC motors, LED lighting, pumps, solenoids, and other loads up to 5A. Key Features PWM ...

SKU: TB-XC4472

This versatile motor and servo controller shield for Arduino drives up to 4 bidirectional DC motors or 2 stepper motors, plus 2 servos — all from a single board. The 4 onboard H-bridges provide 0.6A per channel (1.2A peak) with thermal protection, and the dedicated servo ports use the Arduino's h...

SKU: TB-XC4392

The Arduino Compatible Long Range LoRa Shield turns your Arduino into a LoRa wireless node capable of transmitting and receiving data over several kilometres — without the need for a GSM network. Built around the Semtech SX1276 transceiver on the 915MHz band (Australian-legal), it's ideal for rem...

SKU: DF-DFR0141

The Rainbow LED Ring V3 features 12 individually addressable SMD RGB LEDs arranged in a ring, each controllable for brightness and colour. It comes with a pre-loaded bootloader containing several built-in LED animation scripts, so it works standalone without an external microcontroller. Built ar...

SKU: TB-PB8820

A mid-sized solderless breadboard with 400 tie points for prototyping electronic circuits. Features 300 tie points in the centre section and 100 tie points across two power rails, providing a solid platform for Arduino and general electronics projects. Key Features 400 Tie Points – 300 in the ...

SKU: TB-XC4444

A pyroelectric infrared (PIR) motion sensor module for Arduino and microcontroller projects. It detects movement from people and animals by sensing changes in infrared radiation, outputting a digital high signal when motion is detected. Two onboard potentiometers allow adjustment of sensitivity a...

SKU: DF-DFR0654

The FireBeetle Board ESP32-E is a compact IoT development board based on the ESP-WROOM-32E module with a Tensilica LX6 dual-core processor running at 240MHz. It supports Wi-Fi 802.11 b/g/n and Bluetooth 4.2 (BR/EDR + BLE) for versatile wireless connectivity. Designed for ultra-low power IoT appl...

SKU: DF-DRI0039

INTRODUCTION The latest quad motor driver shield for Arduino, compatible with 5V/3.3V Arduino controller, can control up to four DC motors with 8 pins at the same time. The shield supports PWM speed control and polarity control. The driver shield includes two TB6612FNG ...

SKU: DF-SEN0213

The DFRobot Gravity Heart Rate Monitor Sensor measures the electrical activity of the heart and outputs it as an analog signal. Built around the AD8232 chip, it filters and amplifies the ECG signal to produce a clean waveform from the PR and QT intervals — viewable in real time using the Arduino ...

SKU: DF-DFR0017

The DFRobot Relay Module is a standard relay used with a controller board to interface external electrical circuits or modules. Some of the most common applications with Arduino are: Home lighting, electrical appliances of high power and other equipments. The modular design makes it easy to in...

SKU: DF-DFR0272

An Arduino-compatible Ethernet shield based on the Wiznet W5200 chip, providing a simple way to connect your Arduino to a network. It plugs directly onto an Arduino Uno or Mega 2560 and supports stacking additional shields on top. An aluminium alloy heatsink is fitted to the W5200 chip for therma...

SKU: DF-SEN0159

The Gravity CO2 Gas Sensor uses an MG-811 electrochemical sensing element to detect carbon dioxide concentration in the air. The output voltage decreases as CO2 concentration increases, and an onboard potentiometer lets you set a threshold for a digital on/off signal output. An onboard heating c...

SKU: LB-LR0093

Description:The ProtoShield is prototype expansion board with 2 LEDs and 2 button, which can be used directly and more convenience. All the pins and power have been lead out. It is very suitable for building prototype circuit with Arduino.Features: ProtoShield for Arduino Uno To build prototype c...