All Products
AI Overview
For a typical 38 kHz IR remote, try the IR Receiver Diode - TSOP38238 ($4.55), an IR Receiver Module for Arduino ($4.15), or the Adafruit Infrared IR Remote Receiver - STEMMA JST PH 2mm ($8.80) if you prefer a STEMMA connector. To capture codes across 20–60 kHz, use the Adafruit TSMP96000 Code Learning Infrared IR Receiver Breakout ($11.85). For a 56 kHz signal, choose the Vishay TSOP34156 IR Receiver Module ($4.25). The IR Remote Control Kit For Arduino ($2.55) includes both a remote and a 38 kHz receiver.
What will the IR receiver be used for?
Showing 21-40 of 100 products
Super-bright 5mm IR LED (25 pack) [940nm]
·
Infrared LEDs are used for remote controls (they're the little LED in the part you point at your TV) and 'night-vision' cameras, and these little blue guys are high powered ones! They are 940nm wavelength, which is what nearly all devices listen to. They're 20 degree beamwidth, and work great ...
Super-bright 5mm IR LED [940nm]
·
Infrared LEDs are used for remote controls (they're the little LED in the part you point at your TV) and 'night-vision' cameras, and these little blue guys are high powered ones! They are 940nm wavelength, which is what nearly all devices listen to. They're 20 degree beamwidth, and work gre...
IR Remote Controller (2-Key)
This compact 2-key infrared remote controller provides a simple ON/OFF wireless input for your projects. Using the standard NEC protocol at 38 kHz, it transmits reliably over 8 metres with a 60° beam angle — perfect for activating robots, toggling devices, or triggering actions from across the ro...
IR distance sensor includes cable (10cm-80cm) [GP2Y0A21YK0F]
·
The Sharp GP2Y0A21YK0F is an infrared distance sensor that measures distances from 10 cm to 80 cm by bouncing IR light off objects. It outputs an analogue voltage proportional to distance — approximately 3 V at 10 cm and 0.4 V at 80 cm — which can be read directly by an Arduino or other microcont...
IR (Infrared) Receiver Sensor [TSOP38238]
·
IR sensor tuned to 38KHz, perfect for receiving commands from a TV remote control. Runs at 3V to 5V so it's great for any microcontroller.To use, connect pin 3 (all the way to the right) to 5V power, pin 2 (middle) to ground and listen on pin 1. It doesn't do any decoding of the signal, just pass...
Sharp IR Sensor Mounting Bracket - GP2Y0A21/GP2Y0A02YK (Orange)
This mounting bracket is designed for Sharp GP2D12/2D15/Sharp GP2Y0A02YK IR ranger sensor. You can buy this item using 250 reward points. Specification Size:45x20x15mm(1.77x0.79x0.59") Mounting hole distance:14mm(0.55") Weight:5g Compability Sharp ...
Vishay TSSP58038 IR Detector Module, 38kHz, Fixed Gain (3-Pack)
The Vishay TSSP58038 is a modulated IR receiver that is designed specifically for sensing applications instead of data communication for remote control. Unlike most similar-looking units, it has a fixed gain that makes it respond more predictably and quickly to IR light modulated at 38 kHz....
Vishay TSSP58P38 IR Detector Module, 38kHz, Automatic Gain (3-Pack)
The Vishay TSSP58P38 is a unique modulated IR receiver that is designed for IR brightness detection instead of data communication for remote control. This sensor can be used with a 38 kHz modulated IR emitter and the appropriate algorithms to form a distance sensor with a range of up to a f...
Gravity:Digital IR Receiver Module
Infrared devices are widely used, and often for remote controlled devices. With this IR receiver, your Arduino project is now able to receive command from any IR remote controller. Well, it will be also easy to make your own IR controller using IR transmitter. SPECIFICATIONS ...
Sharp GP2Y0A21 IR Distance Sensor (10-80cm) For Arduino
The Sharp distance sensors are a popular choice for many projects that require accurate distance measurements. This IR sensor is more economical than sonar rangefinders, yet it provides much better performance than other IR alternatives. Interfacing to most microcontrollers is straightforward: t...
Pololu 38 kHz IR Proximity Sensor, Fixed Gain, High Brightness
This module features a fixed-gain, 38 kHz modulated IR sensor and a corresponding IR LED with oscillator circuit to make a tiny proximity sensor. This high-brightness version draws an average of 16 mA at 5 V and has a typical sensing range up to approximately 24 inches (60&nb...
Reflective IR Sensor with 470 and 10K Resistors
·
This Reflective IR Sensor is a simple plastic casing with two elements - an IR LED and an IR phototransistor. You can control the IR LED and turn it on to bounce IR off objects to determine their reflectivity. White & light colored stuff will bounce the light, so you can detect it. Black & ...
IR Break Beam Sensor - 3mm LEDs
·
Infrared (IR) break-beam sensors are a simple way to detect motion. They work by having an emitter side that sends out a beam of human-invisible IR light, then a receiver across the way which is sensitive to that same light. When something passes between the two, and its not transparent to ...
IR Break Beam Sensor - 5mm LEDs
·
Infrared (IR) break-beam sensors are a simple way to detect motion. They work by having an emitter side that sends out a beam of human-invisible IR light, then a receiver across the way which is sensitive to that same light. When something passes between the two, and its not transparent to IR,...
Sharp GP2Y0A710K0F IR Range Sensor 100-550cm
The Sharp GP2Y0A710K0F IR Range Sensor takes a continuous distance reading and reports the distance as an analog voltage with a distance range of 100cm to 550cm. The interface is 5-wire with power, ground and output. This sensor comes with a 5 Pin JST cable.Specification• Supply voltag...
IR Remote Control Kit For Arduino
A compact infrared wireless remote control kit for Arduino projects. The kit includes an ultra-thin 20-key IR remote and a 38 kHz IR receiver module, providing a simple way to add wireless control to robots, interactive displays, and other Arduino-based builds. The IR receiver module decodes sta...
IR distance sensor includes cable (20cm-150cm) [GP2Y0A02YK]
·
This SHARP distance sensor bounces IR off objects to determine how far away they are. It returns an analog voltage that can be used to determine how close the nearest object is. Comes with 8" long 3-JST interface wire. These sensors are good for detection between 20cm-150cm. For over 1 m distance...
SparkFun IR Array Breakout - 55 Degree FOV, MLX90640 (Qwiic)
It’s time to say hip hip array for this IR Breakout! The MLX90640 SparkFun IR Array Breakout is equipped with a 32x24 array of thermopile sensors creating, in essence, a low resolution thermal imaging camera. With this breakout you can detect surface temperatures from many feet away with an accur...
SparkFun IR Array Breakout - 110 Degree FOV, MLX90640 (Qwiic)
It’s time to say hip hip array for this IR Breakout! The MLX90640 SparkFun IR Array Breakout is equipped with a 32x24 array of thermopile sensors creating, in essence, a low resolution thermal imaging camera. With this breakout you can detect surface temperatures from many feet away with an accur...
940nm IR Infrared and Receiver LED
A matched pair of 5mm infrared LEDs — one transmitter (clear) and one receiver (black) — operating at 940nm. Use them to build object sensors, colour sensors, line sensors, distance sensors, and custom wheel encoders. Specifications Size – 5mm Lead Length – 37mm Wavelength – 940nm (infrared)...