All Products

SKU: DF-DFR1262 · MPN: DFR1262

This 6.67-inch flexible AMOLED panel is made for curved, form-fitting display prototypes where a rigid screen will not suit the design. Its bendable substrate keeps the module very thin, with a maximum thickness of just 1.2mm.The display runs at a native 2400x1080 (SPR) resolution with 450cd/m² b...

SKU: DF-DFR0125

The DFRduino Ethernet Shield V2.1 is now released. This version of Ethernet Shield is not only compatible with Mega 1280 and 2560, but also provides a Micro SD card slot for reading/writing. DFRduino Ethernet Shield V2.1 is fully compatible with Ardunio Ethernet Shield. With the offical e...

SKU: DF-DFR0392

DFRduino M0 is the first 32-bit Arduino microcontroller based on ARM Cortex-M0 core that supports 5V logic. If you use a standard UNO-compatible microcontroller in a project, do you ever find that GPIO and processing performance is underwhelming? Upgrading to a Mega style microcontroller is too...

SKU: DF-DFR0003

DFRduino Mega1280 is a microcontroller board based on the ATmega1280. It has 54 digital input/output pins, 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. Because it has bootloader, it can download...

SKU: DF-DFR0010

The DFRduino Nano USB Microcontroller V3.1 (ATMega 328) is a breadboard ready version of the Arduino mini with integrated USB. The arduino Nano has everything that the Diecimila has (electronically) with more analog input pins and an on-board +5V AREF jumper. The arduino Nano automatically se...

SKU: DF-DFR0159

The 5V DFduino Pro Mini V1.3(Arduino Pro Mini Compatible) is a microcontroller board based on the ATmega328.It is a 5V DFduino running the 16MHz bootloader (select 'Arduino Duemilanove w/ 328' within the Arduino software). It is an advance version of offical Arduino Pro Mini. The DFRd...

SKU: DF-DFR0216

DFRduino Uno V3.0 from DFRobot is a physical world computing board of small size for academics or development . It is a simple microcontroller board fully compatible with Arduino UNO R3 and Arduino IDE open-source development environment. This environment implements the Processing / Wiring ...

SKU: DF-KIT0210 · MPN: KIT0210

This compact outdoor solar power kit is made for off-grid monitoring and IoT installations where mains power is not available. It pairs a 10W monocrystalline solar panel with a solar power controller to charge lithium batteries and provide regulated 12V and 5V outputs for devices such as Raspberr...

SKU: DF-SER0072 · MPN: SER0072

This industrial-grade motion actuator is built for high-load applications that need serious torque, accurate position control and rugged construction. It combines a 24V brushless motor with a 12-bit magnetic encoder for stable, high-resolution angle feedback.With stall torque up to 600kg·cm, a 39...

SKU: DF-SER0073 · MPN: SER0073

Built for demanding robotics and automation, this industrial servo combines a high-voltage brushless motor, hardened steel gearing and non-contact magnetic encoder feedback for strong, repeatable motion control.At 24V it provides up to 750 kg·cm stall torque, with standard PWM control from 500–25...

SKU: DF-FIT1019 · MPN: FIT1019

Protect sensitive USB ports from external power interference and signal noise with this industrial-grade USB 2.0 isolator. It uses magnetic isolation to create an electrical barrier between connected USB devices, helping to reduce ground loop issues and protect development boards, motherboards an...

SKU: DF-FIT1034 · MPN: FIT1034

This compact three-phase brushless DC motor is built for advanced motion control projects where smooth torque, low noise and precise feedback matter. It runs at a rated 12V and combines a 2804 BLDC motor with a built-in AS5600 magnetic encoder for closed-loop control.The integrated encoder provid...

SKU: DF-FIT0877 · MPN: FIT0877

This compact COB light strip is a bright yellow 5V lighting module for decorative and embedded illumination projects. It uses 16 LED chips under silicone encapsulation to create a smooth, continuous luminous surface with minimal hotspots and shadowing.The low-voltage DC 5V input makes it practica...

SKU: DF-FIT0882 · MPN: FIT0882

This compact COB LED strip provides smooth purple illumination for decorative lighting, creative electronics builds and small-space accent lighting. It integrates 16 LEDs under a silicone-encapsulated surface, helping protect the LED chips while producing a more continuous output than typical dot...

SKU: DF-SEN0365

This compact breakout uses the AMS AS7341 spectral sensor IC to measure colour across multiple visible-light bands. It is designed for projects that need more detail than a basic RGB colour sensor, with channels covering the visible spectrum plus near-IR and an unfiltered channel.The board includ...

SKU: DF-MBT0044-1 · MPN: MBT0044-1

This bundle adds motor, servo and sensor expansion to the UNIHIKER M10 single-board computer, using the included Type-C to HY2.0-4P communication cable to bridge the M10 to the expansion board.The board includes an integrated 18650 battery holder so your controller, motors and sensors can run fro...

SKU: DF-SEN0673 · MPN: SEN0673

The CS30 is an integrated RGB-D 3D vision sensor that combines a Time-of-Flight depth camera with an HD colour imager. It is designed to capture detailed point cloud data for robotics, interactive AI, 3D scanning and SLAM applications.Its depth and colour data can be fused in real time, helping s...

SKU: DF-DFR1092 · MPN: DFR1092

This 3.5-inch display module combines a 480 × 320 IPS panel with capacitive touch for ESP32 and Arduino projects. Its optical bonding process laminates the touch panel and display together, improving clarity while helping reduce reflections and dust ingress.For wiring, the module offers both a st...

SKU: DF-DFR1120-868 · MPN: DFR1120-868

Build remote monitoring and control systems around a single DIN-rail RTU for EU868 LoRaWAN networks. This 868MHz control terminal is designed for industrial IoT, smart agriculture, building automation and environmental monitoring where long-range wireless telemetry and local device control are ne...

SKU: DF-DFR1195 · MPN: DFR1195

This ESP32-S3 development board is built for long-range IoT prototyping using LoRa, LoRaWAN and Meshtastic. It can be used for one-to-one LoRa links, one-to-many LoRa communication, standard LoRaWAN networks, or Meshtastic mesh networking.The board is designed to be approachable for makers and de...