All Products

SKU: LB-H20

The AT-H20 Flux Gel is a high-quality, no-clean flux formulated for precision soldering applications. Packaged in a convenient 20g syringe, it’s ideal for surface-mount, rework, and repair tasks where accuracy and control matter.Key Features: No-clean formula — leaves minimal, non-corrosive resid...

SKU: SF-COM-30157 · MPN: COM-30157

The ATMEGA2560-16AUR is a high-performance, low-power 8-bit microcontroller based on the Microchip AVR enhanced RISC architecture. It is the controller IC used at the heart of the Arduino Mega and many other advanced controller boards, making it a strong choice for complex embedded projects that ...

SKU: EC-AAM328AT

This is a ATmega328 IC in DIP package, pre-loaded with the Arduino Optiboot (Atmega328 16MHz) Bootloader. This will allow you to use Arduino code in your custom embedded project without having to use an actual Arduino board.To get this chip works, you will need an external 16MHz crystal or resona...

SKU: SF-DEV-10524

The name says it all on this one. An ATmega328 in DIP package, pre-loaded with the Arduino Optiboot (Uno 16MHz) Bootloader. This will allow you to use Arduino code in your custom embedded project without having to use an actual Arduino board. To get this chip working with Arduino IDE, you wi...

SKU: EC-AP0500STK

AVRISP2.0 STK500 programmer help you download your codes into your controller or bootloader to your Arduino board, it communicates with PC via USB port, and it works with most of PC & notebook computers.Features It can support a wide range of ATMEL AVR microcontroller. It can works with AVR Studi...

SKU: LB-24-ATMOS

A compact barometric pressure and temperature sensor module that communicates over I2C. Ideal for weather stations, altitude estimation, and environmental monitoring projects with micro:bit, Arduino, or other microcontrollers. Key Features Measurements – Atmospheric pressure and temperature I...

SKU: LB-1016B

Upgrade your soldering setup with the ATTEN ST-80 Soldering Station paired with the ST-1016 Smoke Absorber — a perfect combination for precision, safety, and convenience.The ST-80 features a high-performance 80W soldering iron with fast heat-up, accurate temperature control, and an ergonomic hand...

SKU: SF-COM-19582 · MPN: COM-19582

The ATtiny84A is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. It is suited to compact embedded projects where you need a small AVR controller with flexible I/O and low-voltage operation.By executing powerful instructions in a single clock cycle, the ATtiny84...

SKU: ATTINY85-20MURTR-ND

Do you have a project that needs the ATTINY85-20MURTR-ND?We purchased these back in 2021 and then, never made anything with them.They have been kept in a dry cabinet ever since.The packet says it was 1000, we have probably used 10.

SKU: SF-PRT-09498

A right-angle 24-pin Molex Mini-Fit Jr. connector, the standard ATX power supply connector found on PC motherboards. Two rows of twelve pins break out to through-hole male headers for PCB mounting. Pair with a standard ATX computer power supply to source multiple voltages (+3.3V, +5V, +12V, -12V)...

SKU: SF-PRT-15700

A 4-pin right-angle ATX connector designed to mate with the standard 4-pin peripheral power connector commonly found on ATX power supplies. Through-hole (PTH) mounting for secure PCB attachment. Specifications Pins – 4 Type – ATX peripheral power connector Orientation – Right angle Mounting...

SKU: DF-FIT0975 · MPN: FIT0975

##Introduction This power cord is specially designed for LattePanda Sigma users and can provide stable power supply to Sigma. One end of the cable adopts an ATX-24Pin chassis power connector for connecting to the chassis power ATX interface; the other end connects to 2 sets of 12V power interface...

SKU: AF-1780

This audio adapter lets you easily add high quality 16 bit, 44.1 kHz sample rate (CD quality) audio to your projects with a Teensy 3.2, 3.5 or 3.6. It supports stereo headphone and stereo line-level output, and also stereo line-level input or mono microphone input.The audio chip connects to Te...

SKU: AF-4384

This audio adaptor lets you easily add high quality 16 bit, 44.1 kHz sample rate (CD quality) audio to your projects with Teensy 4.0 (Rev D). It supports stereo headphone and stereo line-level output, and also stereo line-level input or mono microphone input. The Teensy Audio Library lets...

SKU: DF-DFR0126

This Audio Analyzer module features the MSGEQ7 graphic equalizer display filter.It will give your arduino ears. Sound is broken down into seven frequency bands and the peak level for each band can be read. The seven frequencies measured are as follows: 63Hz, 160Hz, 400Hz, 1kHz, 2.5kHz, 6.25kHz a...

SKU: DF-DFR0781

INTRODUCTIONThis Bluetooth module features Bluetooth/U-disk/TF-card playback, and Bluetooth call function, supporting simple and clear serial port control function, BLE pass-through, and SPP pass-through functions. The highlight of this product is the dual-mode Bluetooth, which also means that it...

SKU: SF-CAB-08566

A standard 3.5 mm stereo audio cable with a length of 6 ft (~1.8 m). Both ends feature a standard 3.5 mm TRS plug, making it suitable for audio connections, basic data transmission, or carrying analogue voltage signals between devices. Key Features 3.5 mm TRS Connectors – Standard stereo plug ...

SKU: SF-CAB-11580

TRRS connectors are the 3.5mm audio-style connectors that you see on some phones, MP3 players and development boards. TRRS stands for “Tip, Ring, Ring, Sleeve,” which reflects the fact that, unlike a standard stereo connector, this actually has three conductors and a ground. Some devices use the ...

SKU: SF-CAB-14163

This is a foot-long white audio cable that has been terminated with two TRRS connectors at each end. TRRS connectors are the 3.5mm audio-style connectors that you see on some phones, MP3 players and development boards. TRRS stands for “Tip, Ring, Ring, Sleeve,” which reflects the fact that, unlik...

SKU: SF-CAB-18983

A 1-metre TRS (Tip, Ring, Sleeve) audio cable with standard 3.5mm plugs on both ends. Suitable for connecting audio devices, development boards with 3.5mm jacks, and other three-conductor applications. Specifications Connector – 3.5mm TRS (male) on both ends Conductors – 3 (Tip, Ring, Sleeve)...