All Products

SKU: DF-FIT0493

A 12V DC gear motor with an integrated quadrature encoder, ideal for mobile robot platforms and closed-loop motor control. The 34:1 gearbox provides a no-load speed of 350 RPM with a stall torque of 12 kg·cm, and the encoder delivers 374 pulses per revolution of the output shaft for precise speed...

SKU: AF-448

A 12V EL (electroluminescent) wire and tape inverter for fixed installations and larger EL projects. Unlike pocket-sized 2×AA inverters, this brick-style inverter runs from a 12V DC input — connect it to a wall adapter for permanent setups, or use a larger battery pack (such as 8×AA) for extended...

SKU: DF-FIT0843

An ultra-thin flexible LED strip in ice blue, measuring just 2.5 mm wide and 1 mm thick. With 120 SMD 0805 LEDs per metre, this 1-metre strip runs on 12V DC and can be cut every 3 LEDs to fit your exact length requirements. The incredibly slim profile makes this strip ideal for lighting in tight...

SKU: DF-FIT0842

An ultra-thin flexible LED strip in yellow, measuring just 2.5 mm wide and 1 mm thick. With 120 SMD 0805 LEDs per metre, this 1-metre strip runs on 12V DC and can be cut every 3 LEDs to fit your exact length requirements. The incredibly slim profile makes this strip ideal for lighting in tight s...

SKU: LB-LS1017-280

The GA25-370 is a compact 12V DC gear motor with metal gears and a built-in speed encoder for closed-loop control. Running at 280 RPM, it provides a good balance of speed and torque for small robotics and automation projects. Key Features Built-In Speed Encoder – Real-time speed feedback for P...

SKU: LB-LS1017-60

The GA25-370 is a compact 12V DC gear motor with metal gears and a built-in speed encoder for closed-loop control. This 60 RPM variant uses a higher gear ratio for increased torque at lower speed, making it well-suited for applications that need precise, controlled movement. Key Features Built...

SKU: LB-LS0112-280

The JGA25-370 is a compact 12V DC gear motor with metal gears, delivering 280 RPM at 12V. This variant does not include a speed encoder, making it a simpler and more affordable option for projects that don't require closed-loop feedback. Key Features 280 RPM – At 12V nominal voltage Metal Gea...

SKU: LB-LS0112-60

The JGA25-370 is a compact 12V DC gear motor with metal gears, delivering 60 RPM at 12V. The higher gear ratio provides increased torque at lower speed, making it well-suited for applications needing slow, controlled movement. This variant does not include a speed encoder. Key Features 60 RPM ...

SKU: DF-FIT0277

The DFRobot 12V Low Noise DC Motor (Model 28PA51G) is a quiet, high-torque geared motor with a built-in two-phase hall encoder. Designed for applications where noise is a concern, it produces approximately 57–68 dBA under no-load conditions — making it well suited for indoor robotics and equipmen...

SKU: LB-LR0214-16

This compact 12V temperature controller features a 3-digit LED display for setting and monitoring temperature, along with a built-in 10A relay for switching heating or cooling loads. It uses an NTC thermistor probe (included) for measurement across a wide range of −50 to 110°C. The relay operate...

SKU: DF-FIT0498

This 12V normally closed solenoid valve controls water flow through a 1/2″ (DN15) inlet and outlet. It remains closed when unpowered and opens when 12V is applied — no polarity distinction is required. Pair it with a Gravity Water Flow Sensor (1/2″) for real-time flow monitoring in automated syst...

SKU: SF-ROB-10456

This 12V DC solenoid valve controls water flow through a 3/4″ threaded inlet and outlet. It is normally closed — fluid is blocked until 12V is applied to the fast-on spade connectors on the solenoid coil. Connect it to a pressurised water source such as a garden hose or mains supply for automated...

SKU: PL-4945

The Pololu U3V16F12 is a compact switching step-up (boost) voltage regulator that generates a fixed 12V output from input voltages as low as 1.3V (after start-up). It handles continuous input currents up to approximately 1.5A with a typical efficiency of 85–95%, making it ideal for battery-powere...

SKU: TB-MP3312

This 12W switchmode plug pack features manually selectable voltage output (3V, 5V, 6V, 7.5V, 9V, or 12V DC) at up to 1000 mA, plus a built-in USB-A output socket for charging or powering USB devices. It comes with 7 interchangeable DC plugs to suit a wide variety of barrel connector sizes. The s...

SKU: LB-LR0244

This general-purpose 130-size hobby motor runs on 3–6V and spins at 4,000–8,000 RPM depending on the input voltage. Its compact size and 2 mm shaft make it well suited for small robotics projects, fan-powered cars, and other DIY builds. Specifications Voltage – 3–6V DC Speed – 4,000 RPM @ 3V ...

SKU: WS-24777

A compact 1.32-inch OLED display module with 128×96 resolution and 16 levels of greyscale. The ultra-narrow bezel and onboard voltage translator make it easy to integrate into space-constrained projects. Built around the SSD1327 driver chip, it supports both 4-wire SPI and I2C interfaces for fle...

SKU: WS-24784

This Waveshare 13.3″ AMOLED display delivers a 2560×1440 (2K QHD) resolution with 100% sRGB and 100% DCI-P3 colour gamut coverage. The AMOLED panel produces true blacks and vivid colours with a 178° viewing angle, making it a significant step up from conventional LCD monitors for both embedded pr...

SKU: WS-17391

The Waveshare 13.3″ Magic Mirror is a smart mirror display powered by a built-in Raspberry Pi 3A+. Behind a one-way mirror panel, a 13.3″ IPS touchscreen (1920×1080) displays customisable information — news, weather, time, calendar, and more — while still functioning as a regular mirror. Touch co...

SKU: AF-4429

This 13.56 MHz RFID/NFC sewable button uses an NTAG213 chip in a compact 24 mm laundry-tag form factor. It can be sewn into garments, attached to equipment, or embedded in projects for contactless identification, data sharing, or NFC interactions. The button is passively powered — it requires no ...

SKU: AF-921

This blank 13.56 MHz RFID/NFC silicone bracelet contains a Mifare Classic 1K chip with 1 KB of writable EEPROM storage. The embedded chip and antenna are passively powered — no battery is needed. Simply hold the bracelet a few centimetres from a compatible 13.56 MHz RFID/NFC reader to read or wri...