All Products

SKU: SF-PRT-17260

This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from silicon making it more flexible than our original Qwiic cable particularly in t...

SKU: SF-KIT-15081

The SparkFun Qwiic Connect System is constantly growing in popularity with makers. So to make it even easier to get started, we’ve assembled this Qwiic Cable Kit for everyone. If you aren’t sure which Qwiic cable to use, this handy box includes all of them allowing you to save a little money and ...

SKU: SF-PRT-15109

With the SparkFun Qwiic Connect System expanding every day, we want to make sure it becomes as accessible as possible but we understand there are other systems that can compliment it out there. The Qwiic to Grove Adapter Cable allows interoperability between the SparkFun Qwiic Connect System and ...

SKU: AF-4209

This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium Dupont male headers on the other. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remo...

SKU: AF-4210

This 4-wire cable is a little over 100mm / 4" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove. This cable can be used with Qwiic bo...

SKU: AF-4483

This 100mm adapter cable connects STEMMA QT / Qwiic sensors to Arduino MKR boards. It features a 4-pin JST SH (STEMMA QT / Qwiic) connector on one end and a 5-pin JST SH (Arduino MKR I2C) connector on the other, with the wiring crossed over for correct pin mapping between the two systems. Use th...

SKU: SF-PRT-17259

This is a 100mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from silicon making it more flexible than our original Qwiic cable particularly in tig...

SKU: SF-CAB-17261

This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and female connectors on the other. The cable insulation is made from silicon making it more flexible than our original Qwiic cable particularly in tight spaces or enclosures. This cabl...

SKU: SF-PRT-17257

This is a 500mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from silicon making it more flexible than our original Qwiic cable particularly in tig...

SKU: SF-PRT-17258

This is a 200mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from silicon making it more flexible than our original Qwiic cable particularly in tig...

SKU: SF-PRT-17912

This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookup pigtail on the other. The cable insulation is made from a highly malleable material making it more flexible than our original Qwiic cable particularly in tight spaces o...

SKU: SF-CAB-22726

This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and female connectors on the other. This cable makes it easy to connect components with a Qwiic connector to the male pins on various development platforms. This cable is also a great way to atta...

SKU: SF-SEN-27544 · MPN: SEN-27544

When the ADC built into your microcontroller is not precise enough, this Qwiic breakout adds a high-resolution Texas Instruments ADS1219 for measuring very small analogue voltage changes.The board provides four channels of 24-bit analogue input, which can be used as four single-ended inputs or co...

SKU: SF-COM-16917 · MPN: COM-16917

Show numbers, letters, characters and symbols in bright blue with this compact four-character alphanumeric display. Each digit uses fourteen segments, giving you far more flexibility than a standard seven-segment display.It connects through the SparkFun Qwiic system, so setup is simple: plug in a...

SKU: SF-LCD-29530 · MPN: LCD-29530

This compact OLED board gives your project a crisp monochrome white-on-black interface in a 1.5-inch square form factor. With 128x128 pixels and a 1:1 aspect ratio, it suits custom graphics, menus, status screens and data plotting.The display uses Chip-on-Glass (COG) OLED technology, so each pixe...

SKU: SF-KIT-15209 · MPN: KIT-15209

This kit gives you the core hardware needed to start reading 125kHz RFID tags over I2C, without hunting for a separate reader module, antenna or wiring up a complex circuit. The box includes a SparkFun RFID Qwiic Reader, an ID-12LA RFID reader module, two 125kHz RFID cards and a 100mm Qwiic cable...

SKU: AF-6489 · MPN: ADA6489

This breakout makes it easy to add 3D Hall-effect magnetic sensing to a microcontroller project. The TMAG5273 integrates independent X, Y and Z Hall-effect sensors with a 12-bit ADC, giving you magnetic measurements over I2C plus a built-in temperature sensor for basic temperature readings.It is ...

SKU: SF-KIT-30714 · MPN: KIT-30714

Bring robotics, coding and plant science together in a hands-on classroom platform for building a small-scale automated smart farm. This open-source kit is designed for STEM education, helping students explore precision agriculture, data analysis and automation while growing and caring for real p...

SKU: SF-KIT-24441 · MPN: KIT-24441

Start prototyping low-power cellular IoT projects with a kit built around Digi XBee Cellular and the Qwiic Connect System. It brings together the core board, cellular module, sensor, SIM, antennas and cables needed to begin collecting data beyond normal Wi-Fi range.The included SparkFun Digi XBee...

SKU: SF-KIT-30715 · MPN: KIT-30715

Add another controlled planting area to an existing AgXRP Starter Kit with this DIY expansion pack. It is designed to create a completely independent watering zone, so students can compare plant types, watering schedules and soil conditions side-by-side.The pack works with the XRP Controller in t...