All Products
Showing 1-20 of 100 products
Heelight Core
Heelight Core is a smart sound sensor that can recognize up to 500+ digital voice commands. Heelight Core is tiny, only 20mm*17mm. By using the design of the stamp hole, you can easily integrate Heelight core into your product. We also provide the component library in Eagle format. And ther...
Qwiic Relay - 1x1A DPDT
·
Control higher-power loads from a microcontroller over I2C with this Qwiic relay board. It is built around the Omron G6K-2F-Y DC3 dual-pole/dual-throw relay, letting a low-voltage logic system switch loads up to 1A at 30VDC or 0.3A at 125VAC at 40°C.The board offers both software and hardware con...
Industrial 8-Channel ESP32-S3 WiFi Relay Module (With POE)
·
Built around the ESP32-S3 dual-core processor, this industrial relay module brings local control, networking and edge automation into one DIN-rail friendly unit. It combines 8 relay outputs, 8 digital inputs, isolated CAN, Ethernet, Wi-Fi and Bluetooth for control panels, robotics, smart factorie...
Gravity: Digital 10A Relay Module For Arduino and Raspberry Pi
This Gravity digital relay module is designed for switching external loads from low-voltage controller boards. It suits 5V Arduino boards as well as 3.3V platforms such as Raspberry Pi, BBB, mbed, Intel Joule and Arduino 101.The module uses a high quality 3V relay and supports a wide input range,...
Solid State Relay - 40A (3-32V DC Input)
A solid state relay (SSR) allows you to control high-curent AC loads from lower voltage DC control circuitry. Solid state relays have several advantages over mechanical relays. One such advantage is that they can be switched by a much lower voltage and at a much lower current than most mechanical...
Relay SPDT Sealed - 20A
These are massive single pole - double throw (SPDT) sealed relays. This means that when current is applied to the coil it throws a simple changeover switch, terminating the connection from the NC contact to ground and closing the NO contact. Use them to switch high voltage/high current devices.Fe...
8 Channel Ethernet Relay Controller (Support PoE and USB)
An 8-channel PoE and USB-controlled Ethernet relay controller based on an STM32 microcontroller. Each relay handles up to 277VAC at 10A or 125VAC at 12A, suitable for controlling household appliances, lighting, and industrial equipment remotely over a network. Supports DHCP and static IP configu...
Adafruit Power Relay FeatherWing
·
The Adafruit Power Relay FeatherWing lets you switch high-power loads — lamps, fans, solenoids, small appliances, and more — directly from any Feather microcontroller board. With a switching capacity of up to 10A at 120 VAC or 5A at 240 VAC (resistive loads), it can handle up to 1,200 watts. The...
4 Channel Arduino Relay Shield
This 4-channel relay shield from DFRobot plugs directly onto an Arduino Uno or compatible board, providing opto-isolated relay switching for controlling high-power devices such as lamps, water pumps, and motors. Each relay has its own test button and LED status indicator. The shield features a b...
Adafruit Mini Relay FeatherWing - Latching
·
The Adafruit Latching Mini Relay FeatherWing lets you control mains-powered devices and small appliances using any Feather microcontroller. Switch lamps, fans, solenoids, and other loads rated up to 250 VAC or DC — all from a compact FeatherWing form factor. This is the latching version, which u...
Gravity: Digital 5A Relay Module For Arduino
The DFRobot Relay Module is a standard relay used with a controller board to interface external electrical circuits or modules. Some of the most common applications with Arduino are: Home lighting, electrical appliances of high power and other equipments. The modular design makes it easy to in...
Gravity: 16A Relay Module For Arduino
A relay is an electrically operated switch, which has a control system (also known as the input circuit) and the controlled system (also known as the output circuit), usually used in automatic control circuit. It is actually "automatic switch", using a small electric current to control a large...
Xboard Relay - An Ethernet Controllered Relay
Internet of things has become so easy. With Xboard Relay, you can not only monitor data through internet, but also control it through internet. The Xboard Relay combines an Atmega 32u4 microprocessor and wiz5100 chip which is fully compatible with Arduino Lendardo and Ethernet library,...
USB-RLY16L(16 Low Power 8 channel relay outputs at 16A)
A low power version of the USB-RLY16 module, the USB-RLY16L is powered solely from the USB bus and provides eight volt free contact relay outputs with a current rating of up to 16Amp each. The relays are SPCO (Single Pole Change Over) types and provide position 0, position 1 and common pins (latc...
Pololu Basic SPDT Relay Carrier with 5VDC Relay (Partial Kit)
The Pololu basic relay carrier modules allow simple control of a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. This item includes the basic carrier PCB along with an Omron G5LE-14-DC5 5 V relay, 5.0 mm terminal blocks, and 0.1" male headers in s...
Pololu Basic SPDT Relay Carrier with 12VDC Relay (Assembled)
The Pololu basic relay carrier modules allow simple control of a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. This item includes the basic carrier PCB with a soldered-in 12 V relay, 5.0 mm terminal blocks for the switch connections, and stra...
Ethernet Controlled 8 Channel Relay 16A
The ETH008 is an 8-channel relay module controlled over Ethernet using TCP/IP commands or a built-in HTTP web interface. Each relay is rated up to 16A and features SPCO (Single Pole Change Over) contacts with normally open, normally closed, and common pins available on screw terminals. Individual...
Pololu Basic 2-Channel SPDT Relay Carrier with 5VDC Relays (Assembled)
The Pololu Basic 2-Channel SPDT Relay Carrier provides simple, independent control of two single-pole, double-throw (SPDT) relay switches from low-voltage, low-current control signals. This assembled version comes ready to use with relays, terminal blocks, and header pins pre-soldered. Each rela...
5V SPST DIL Reed Relay
This small, lightweight 5V SPST reed relay is designed for PCB mounting in a standard DIL (Dual In-Line) package. It switches up to 1A DC with a low 0.1W power consumption, making it suitable for low-power switching applications in sensor circuits, security systems, and instrumentation. Key Feat...
SparkFun Qwiic Single Relay
Have you ever wanted to control something powerful or have you ever needed to turn on/off a high power device from your Arduino or another low powered microcontroller? The SparkFun Qwiic Single Relay provides you with the easiest to use relay yet. The Single Relay board can handle up to 5.5A at 2...
