All Products
Showing 1-20 of 94 products
BitMaker_V2 - JST 2.0 battery connector & 6 Grove connectors
Features Easy Usage: Start by simply sliding into the Micro:bit Enhanced functionality: Equipped additionally with an RGB LED, a power switch, a power indicator, and six spare grove connectors Charge: Powered by a USB cable or an external battery Language Supported: MakeCode/MicroPython Comes wi...
TensorFlow Lite for Microcontrollers Kit
·
Machine learning has come to the 'edge' - small microcontrollers that can run a very miniature version of TensorFlow Lite to do ML computations. But you don't need super complex hardware to start developing your own TensorFlow models! We've curated a simple kit to dip your toes into machine ...
Mini Dual Button Unit
Description Dual Button, as its namesake, has two buttons with different color. If the Button unit is not enough, how about double it up to a pair. They share the exact same mechanism, button status can be detected by the input pin status,simply capture the high/low electrical level. This unit...
Grove to STEMMA QT / Qwiic / JST SH Cable - 100mm long
A 100 mm adapter cable that bridges the gap between Grove and STEMMA QT / Qwiic ecosystems. One end features a Grove connector, the other a JST SH (STEMMA QT / Qwiic compatible) connector — making it easy to mix and match sensors, breakouts, and host boards across different connector standards. ...
4-pin JST PH to JST SH Cable - STEMMA / Grove to QT / Qwiic - 200mm long
·
A 200mm adapter cable with a JST-SH 4-pin connector (STEMMA QT / Qwiic, 1mm pitch) on one end and a JST-PH 4-pin connector (STEMMA / Grove, 2mm pitch) on the other. Use it to bridge I2C sensors and drivers between the two connector ecosystems. Both connectors have a latching feel for secure conn...
Grove Zero Starter Kit
NOTE - this product is End of Line. The software no longer works with this version.The modules can be used as is and already have code that makes them interact with each-other but they can not be re-programmed. What’s the Grove Zero？ The Grove Zero is a set of electronics modules that teach...
Cytron MOTION 2350 Pro RP2350 Robotics Controller
·
Built around Raspberry Pi’s RP2350 processor, this Cytron robotics controller is made for beginner and intermediate builders who want to create more advanced robots while spending less time on the supporting electronics.The board integrates a 4-channel brushed DC motor driver, servo outputs, GPIO...
I2C to 8-Channel Solenoid Driver
·
This driver board makes it much easier to control multiple solenoids from a microcontroller over I2C. It uses an MCP23017 GPIO expander so you do not need to dedicate lots of pins just to switch a bank of clicky, inductive loads.Solenoid power connects through the centre terminal blocks, with eac...
Adafruit PyGamer for MakeCode Arcade, CircuitPython or Arduino
·
The Adafruit PyGamer is a pocket-sized, open-source gaming handheld built for DIY game development and retro emulation. Powered by the ATSAMD51 running at 120 MHz with 512 KB flash and 192 KB RAM, it features an analog thumbstick, six tactile buttons, a colour TFT display, and stereo audio — all ...
Adafruit MONSTER M4SK - Two Eyes are Better Than One!
·
The Adafruit MONSTER M4SK is a dual-display development board designed for creating animated electronic eyes for costumes, props, and interactive projects. Powered by a 120 MHz ATSAMD51 Cortex M4 processor, it drives two 240×240 pixel IPS TFT displays with smooth, real-time 3D eyeball animations ...
M5StickC+ Development Kit with Hat
The M5StickC is a compact ESP32-based development board from M5Stack, designed for portable IoT prototyping. Despite its tiny size, it packs a 0.96-inch LCD, 6-axis IMU (MPU6886), microphone, IR transmitter, red LED, and an 80 mAh LiPo battery — all accessible via USB Type-C. This kit includes t...
Stick C including 80mAh-Battery + Watch Accessories + USB Cable
Noted: Stick C ETD on Oct.10, thanks for the understanding. M5Stick-C is a mini M5Stack, powered by ESP32. It is a portable, easy-to-use, open source, IoT development board. What it can do? This tiny block is able to realize your idea, enlighten your creativity, and help with ...
180° Infrared Refletive Unit (ITR9606)
The OP.180 is an infrared reflective limit switch unit built around the ITR9606 sensor, which pairs an infrared emitting diode with a silicon phototransistor in a 180° (straight-through) orientation. When an object passes between the emitter and receiver, the IR beam is broken, triggering a digit...
Mini 3A Relay Unit
Description RELAY, as its namesake, is a M5Unit that implenments a Relay functions. Relay can be used as an electrically operated switch, uses an electromagnet to mechanically operate a switch,to where it is necessary to control a large power load circuit by a separate low-power signal, like a...
Adafruit MCP4728 Quad DAC with EEPROM - STEMMA QT / Qwiic
·
The Adafruit MCP4728 Quad DAC with EEPROM provides four independent 12-bit digital-to-analogue converters in a single I2C package. Set precise output voltages for your project, and save your settings to the built-in EEPROM so they're automatically restored on power-up. Each channel supports two ...
Adafruit BrainCraft HAT - Machine Learning for Raspberry Pi 4
·
The Adafruit BrainCraft HAT is a Raspberry Pi 4 add-on board designed for machine learning and AI projects at the edge. It combines a display, stereo microphones, audio output, camera connector, user controls, and sensor ports into a single HAT, providing everything needed to build audio and vide...
Maker Pi RP2040 - Motor and Robot Controller
Cytron's Maker Pi RP2040 features the new Raspberry Pi RP2040 chip embedded on a robot controller board. The board comes with a dual-channel DC motor driver, 4 servo motor ports, and 7 Grove I/O connectors. Now you can build your new robot friend while simultaneously trying out the new RP2040 chi...
GPS/GNSS Magnetic Mount Antenna SMA - 3m
This GPS/GNSS magnetic mount antenna is designed for multi-constellation reception, supporting both GPS and GLONASS satellite systems. The magnetic base allows easy mounting on any metal surface such as a vehicle roof or ground plate, and the 3 m cable with standard SMA connector provides flexibl...
Grove Shield for micro:bit v2.0
Connect a micro:bit to the Grove ecosystem with this plug-and-play extension board from Seeed Studio. Its four onboard Grove ports make it easier to add modules such as sensors, actuators, communication devices and displays to projects.The shield also reserves four extra pinouts for additional Gr...
Grove Inventor Kit for micro:bit
Expand your micro:bit with the Grove Inventor Kit – a complete package of sensors, displays, and actuators that connect without soldering. The kit includes a Grove shield that adds plug-and-play Grove ports to your micro:bit, plus 8 carefully selected modules to get you building projects immediat...
