All Products
AI Overview
Here are solid options depending on which gas you need to detect and whether you want simple analog sensing or calibrated digital measurement.
Budget MQ-series (analog, good for hobby leak detection)
- Gravity: Arduino Gas Sensor (MQ2) ($11.80) — detects LPG/i-butane/propane/methane/alcohol/hydrogen/smoke (broad, general-purpose).
- Gravity: Arduino CO/Combustible Gas Sensor (MQ9) ($13.10) — focused on CO + combustible gases (methane/propane).
- Methane CNG Gas Sensor - MQ-4 ($14.95) — methane / natural gas.
- LPG Gas Sensor - MQ-6 ($14.95) — propane/butane (LPG).
- Hydrogen Gas Sensor - MQ-8 ($16.00) — hydrogen.
- Alcohol Gas Sensor - MQ-3 ($18.35) — alcohol / breathalyzer-style sensing.
- If you already have an MQ “can” sensor and need an adapter/carrier: Gas Sensor Breakout ($3.05) or Pololu Carrier for MQ Gas Sensors (Bare PCB Only) ($2.25).
Indoor air quality / VOC sensing (digital I2C breakouts)
- SGP41 VOC & NOx Gas Sensor Breakout ($49.05) — I2C sensor for VOC + NOx indices (great for IAQ projects).
- Adafruit ENS160 MOX Gas Sensor - Sciosense CCS811 Upgrade ($45.40) — I2C MOX gas sensor aimed at IAQ/eCO2/TVOC-style outputs.
- Adafruit MiCS5524 CO, Alcohol and VOC Gas Sensor Breakout ($30.80) — analog-style breakout useful for CO/alcohol/VOC type detection.
CO2 sensors (choose “true CO2” when you need real ppm)
- Gravity: STCC4 True Carbon Dioxide (CO2) Sensor (3-in-1 Air Quality Monitoring, 400 ~ 5000ppm) ($36.65) — 400–5000 ppm, compact option for typical indoor monitoring.
- Adafruit SCD-30 - NDIR CO2 Temperature and Humidity Sensor - STEMMA QT / Qwiic ($131.55) — true NDIR CO2 with temperature + humidity, good accuracy for IAQ.
- For building/industrial style installs: DFRobot SEN0659 Industrial RS485 NDIR CO2 Sensor - 400-5000ppm ($142.60) — RS485, IP65, 400–5000 ppm.
Factory-calibrated specialty gas sensors (higher cost, better specificity)
- Gravity Calibrated NH3 Ammonia Sensor - I2C/UART ($336.60) — calibrated ammonia (NH3) with analog/I2C/UART outputs.
- Gravity HF Gas Sensor (Calibrated) - I2C/UART/Analogue ($611.95) — calibrated hydrogen fluoride (HF) with analog/I2C/UART outputs.
What gas (or use-case) are you trying to measure?
Collections
Showing 1-20 of 100 products
ZMOD4450 Refrigeration Air Quality Gas Sensor Module
·
The ZMOD4450 is a compact gas sensor module for detecting gases associated with food ripening or rotting. It is intended for refrigeration air quality (RAQ) applications such as food storage and shipping, including humid and dusty environments where water spray, condensation or immersion may be p...
Gravity HF Gas Sensor (Calibrated) - I2C/UART/Analogue
·
Measure hydrogen fluoride concentration with a factory-calibrated electrochemical probe that supports analogue, I2C and UART output modes. It is designed for quickly building an HF concentration detector for industrial and environmental protection applications.The sensor includes integrated tempe...
SGP41 VOC & NOx Gas Sensor Breakout
·
Build a digital nose for indoor air quality projects with this SGP41 gas sensor breakout. The Sensirion SGP41 is a fully integrated MOX gas sensor with I2C interfacing, so you do not need to manage heater control or analogue readings yourself.The sensor combines two MOX hot-plate sensing elements...
Adafruit ENS160 MOX Gas Sensor - Sciosense CCS811 Upgrade
The Adafruit ENS160 is a fully integrated metal-oxide (MOX) gas sensor from ScioSense, designed as a drop-in upgrade for the now-discontinued CCS811. It combines multiple MOX sensing and heating elements on a single chip to provide detailed air quality readings including TVOC (Total Volatile Orga...
Methane CNG Gas Sensor - MQ-4
This is a simple-to-use compressed natural gas (CNG) sensor, suitable for sensing natural gas (composed of mostly Methane [CH4]) concentrations in the air. The MQ-4 can detect natural gas concentrations anywhere from 200 to 10000ppm. This sensor has a high sensitivity and fast response time. Th...
LPG Gas Sensor - MQ-6
A simple-to-use MQ-6 gas sensor for detecting liquefied petroleum gas (LPG) — primarily propane and butane — in the air. The sensor detects concentrations from 200 to 10,000 ppm with high sensitivity and fast response time. The MQ-6 outputs an analog resistance that varies with gas concentration...
Hydrogen Gas Sensor - MQ-8
This is a simple-to-use hydrogen gas sensor, suitable for sensing hydrogen concentrations in the air. The MQ-8 can detect hydrogen gas concentrations anywhere from 100-10000ppm. This sensor has a high sensitivity and fast response time. The sensor’s output is an analog resistance. The drive cir...
Adafruit MiCS5524 CO, Alcohol and VOC Gas Sensor Breakout
The Adafruit MiCS-5524 Gas Sensor Breakout is a robust MEMS sensor from SGX Sensortech for detecting carbon monoxide, natural gas leaks, alcohol, and volatile organic compounds (VOCs). It provides a simple analogue voltage output that increases in proportion to the concentration of detected gas —...
Gravity: Arduino Gas Sensor (MQ2)
INTRODUCTION This is a generic Arduino gas sensor. It has MQ2 probe which is able to detect LPG, i-butane, propane, methane ,alcohol, Hydrogen, smoke.It can be used in gas leakage detecting device in consumer and industry markets. It has a high sensitivity and fast response time. ...
Gravity: Arduino CO/Combustible Gas Sensor (MQ9)
The Gravity MQ-9 gas sensor detects carbon monoxide (CO) and combustible gases including methane and propane. It uses a semiconductor SnO2 sensing element that cycles between high and low temperatures — detecting CO at low temperature (1.5V) and combustible gases at high temperature (5.0V). With...
Gravity: Arduino CO2 Gas Sensor
The Gravity CO2 Gas Sensor uses an MG-811 electrochemical sensing element to detect carbon dioxide concentration in the air. The output voltage decreases as CO2 concentration increases, and an onboard potentiometer lets you set a threshold for a digital on/off signal output. An onboard heating c...
Alcohol Gas Sensor - MQ-3
The MQ-3 is an alcohol gas sensor suitable for detecting alcohol concentration in the air, similar to a breathalyser. It provides an analog resistive output based on alcohol concentration, with high sensitivity and fast response time. The drive circuit is simple — just one resistor is needed, and...
Gas Sensor Breakout
This breakout board provides a convenient PCB adapter for MQ-series gas sensors (MQ-3, MQ-4, MQ-6, MQ-7, and MQ-8). It converts the sensor's oversized, oddly-spaced pins into a standard breakout format that's easy to wire up to a microcontroller. Connect 5 V, ground, and a load resistor to an AD...
Gravity: Arduino Hydrogen Gas Sensor (MQ8)
This is an Arduino hydrogen gas sensor. It has high sensitivity to Hydrogen (H2) and less sensitivity to alcohol, LPG,cooking fumes . Hydrogen gas is highly flammable and will burn in air at a very wide range of concentrations The sensitivity is able to be adjusted by the potentiome...
Carbon Monoxide Flammable Gas Sensor MQ-9
This semiconductor gas sensor detects the presence of Carbon Monoxide at concentrations from 10 to 1,000 ppm and combustible gas from 100 to 10,000 ppm. The sensor’s simple analog voltage interface requires only one analog input pin from your microcontroller.
Gravity: Arduino LPG Gas Sensor (MQ5)
The Gravity MQ5 gas sensor is highly sensitive to LPG, natural gas, and town gas, with lower sensitivity to alcohol, cooking fumes, and cigarette smoke. The analogue output is proportional to gas concentration, and sensitivity can be adjusted via the on-board potentiometer. Gravity interface for ...
Gravity: Arduino LPG Gas Sensor (MQ4)
INTRODUCTION This is an Arduino CH4 gas sensor. It uses MQ4 probe which is able to detect nature gas, CH4. It is less sensitivity in detecting alcohol, cooking fumes, and cigarette smoke. The sensitivity can be adjusted by the potentiometer. The output is ...
Gravity: Arduino Propane Gas Sensor (MQ6)
INTRODUCTION This is an Arduino Propane Gas Sensor. It uses MQ6 probe to detect iso-butane, propane and liquefied petroleum gas (LPG). It is less sensitive with alcohol, cooking fumes and cigarette smoke. It can be used in gas leakage detecting equipment in...
Methane Gas Sensor MQ-4
This semiconductor gas sensor detects the presence of methane (CNG) gas at concentrations from 300 ppm to 10,000 ppm, a range suitable for detecting gas leaks. The sensor’s simple analog voltage interface requires only one analog input pin from your microcontroller.
Alcohol Gas Sensor MQ-3
The MQ-3 is a semiconductor gas sensor that detects alcohol vapour at concentrations from 0.04 mg/L to 4 mg/L — a range suitable for building a breathalyser. It provides a simple analog voltage output that requires only one analog input pin from your microcontroller. Key Features Alcohol Detec...
