All Products
Showing 1-20 of 93 products
Adafruit Universal Thermocouple Amplifier MAX31856 Breakout
·
The Adafruit Universal Thermocouple Amplifier MAX31856 Breakout reads temperature from virtually any thermocouple type — K, J, N, R, S, T, E, or B — with 0.0078125°C resolution and a measurement range of -210°C to +1800°C. It handles cold-junction compensation, linearisation, and fault detection ...
Adafruit 2.9 Grayscale eInk / ePaper Display FeatherWing - 4 Level Grayscale
·
Add a versatile grayscale eInk display to your Feather project with this 2.9" FeatherWing. The 296×128 pixel panel supports four levels of grey — white, light grey, dark grey, and black — giving you more visual depth than a standard monochrome display while refreshing in about one second, far fas...
Adafruit AMG8833 IR Thermal Camera FeatherWing
·
Add heat-vision to any Feather board with the Adafruit AMG8833 Thermal Camera FeatherWing. This sensor from Panasonic contains an 8×8 array of infrared thermal sensors that returns 64 individual temperature readings over I2C — like a compact thermal camera in FeatherWing form factor. The AMG8833...
Adafruit 2.13 Monochrome eInk / ePaper Display FeatherWing - 250x122 Black and White
·
Add a crisp, paper-like display to your Feather project with the Adafruit 2.13" Monochrome eInk FeatherWing. This 250×122 pixel black-and-white eInk panel delivers excellent daylight readability and retains its image even with power completely disconnected — just like printed paper. The FeatherW...
Adafruit AirLift Shield - ESP32 WiFi Co-Processor
·
Give your Arduino project WiFi connectivity with the Adafruit AirLift Shield. This shield uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL encryption so your main microcontroller can focus on your application logic. The ESP32 communicates ov...
Adafruit AirLift Bitsy Add-On – ESP32 WiFi Co-Processor
·
Give your ItsyBitsy project WiFi connectivity with the Adafruit AirLift Bitsy Add-On. This compact daughterboard uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL encryption so your main microcontroller can focus on your application logic. Th...
Adafruit 2.13 Monochrome E-Ink Bonnet for Raspberry Pi - THINK INK
·
The Adafruit 2.13" Monochrome E-Ink Bonnet brings crisp, paper-like displays to your Raspberry Pi with no soldering required. Simply plug this pre-assembled bonnet onto any Pi with a 2×20 header and start displaying high-contrast black-and-white graphics that remain visible even with power discon...
Adafruit 2.9 Tri-Color eInk / ePaper Display FeatherWing - Red Black White
·
Add a vibrant tri-colour eInk display to your Feather project with this 2.9" FeatherWing. The panel displays red, black, and white pixels at 296×128 resolution that remain visible even with power completely disconnected — just like printed paper, but with the added impact of colour. The FeatherW...
Adafruit 2.7 Tri-Color eInk / ePaper Shield with SRAM - Red Black White
·
Add a large, vibrant tri-colour eInk display to your Arduino project with this shield. The 2.7" panel displays red, black, and white pixels at 264×176 resolution that remain visible even with power completely disconnected. The shield form factor plugs directly onto Arduino-compatible boards from ...
Adafruit AirLift FeatherWing – ESP32 WiFi Co-Processor
·
Give your Feather project WiFi connectivity with the Adafruit AirLift FeatherWing. This add-on uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL encryption so your main Feather can focus on your application logic. The ESP32 communicates over ...
Adafruit ATSAMD09 Breakout with seesaw
·
The Adafruit ATSAMD09 Breakout with seesaw is a versatile I2C peripheral board built on the Adafruit seesaw framework. Seesaw is a near-universal converter that lets you add GPIO, ADC, PWM, and more to any I2C-capable microcontroller or single-board computer — all over a simple I2C connection. R...
Adafruit ATtiny817 Breakout with seesaw - STEMMA QT / Qwiic
·
The Adafruit ATtiny817 Breakout with seesaw is a compact development board that combines an ATtiny817 microcontroller with the Adafruit seesaw I2C framework and STEMMA QT connectivity. Pre-programmed with seesaw firmware, it acts as an I2C-controlled co-processor — adding GPIO, ADC, PWM, and NeoP...
Adafruit ATtiny1616 Breakout with seesaw - STEMMA QT / Qwiic
The Adafruit ATtiny1616 Breakout with seesaw is a versatile development board that combines an ATtiny1616 microcontroller with the Adafruit seesaw I2C framework and STEMMA QT connectivity. It works as both a standalone dev board and an I2C peripheral that adds GPIO, ADC, PWM, and NeoPixel support...
Adafruit ATtiny816 Breakout with seesaw - STEMMA QT / Qwiic
The Adafruit ATtiny816 Breakout with seesaw is a compact development board that combines an ATtiny816 microcontroller with the Adafruit seesaw I2C framework and STEMMA QT connectivity. Pre-programmed with seesaw firmware, it acts as an I2C-controlled co-processor — adding GPIO, ADC, PWM, and NeoP...
Adafruit TSMP96000 "Code Learning" Infrared IR Receiver Breakout
·
The Adafruit TSMP96000 "Code Learning" Infrared IR Receiver Breakout detects IR signals across a wide frequency range of 20–60 KHz, making it perfect for "code learning" applications where you need your device to work with any IR remote control — even when you don't know the carrier frequency. U...
Adafruit Mini I2C Gamepad with seesaw - STEMMA QT / Qwiic
The Adafruit Mini I2C Gamepad is a compact controller breakout with a 2-axis thumb joystick and 6 momentary buttons (4 large, 2 small), all communicating over I2C via the seesaw co-processor. It doesn't use any of your GPIO or analogue pins — just connect via STEMMA QT / Qwiic and start reading i...
Adafruit 8x16 LED Matrix FeatherWing w/o Matrices
·
Create a compact 8×16 LED matrix display for any Feather board with this FeatherWing driver. The HT16K33 I2C driver handles all multiplexing for two 0.8" mini 8×8 LED matrices (128 LEDs total), controlled over just two I2C pins. Works with any Adafruit Feather board. The FeatherWing is perfect f...
Adafruit 4-Digit 7-Segment LED Matrix Display FeatherWing - FeatherWing Only - no matrices!
·
The Adafruit 4-Digit 7-Segment LED Matrix Display FeatherWing makes it easy to add a numeric display to any Feather project. The HT16K33 driver handles all LED multiplexing over I2C, so your Feather only needs two shared pins — leaving all other GPIO free for sensors, buttons, and additional disp...
Adafruit 4-Digit 7-Segment LED Matrix Display FeatherWing - Red
·
Add a bright, easy-to-read numeric display to your Feather project with the Adafruit 4-Digit 7-Segment FeatherWing in red. This combo pack includes the HT16K33-based FeatherWing backpack and a matching 0.56" tall red 7-segment display with decimal points and a centre colon for clock displays. Th...
Adafruit 4-Digit 7-Segment LED Matrix Display FeatherWing - Yellow
·
Add a bright, easy-to-read numeric display to your Feather project with the Adafruit 4-Digit 7-Segment FeatherWing in yellow. This combo pack includes the HT16K33-based FeatherWing backpack and a matching 0.56" tall yellow 7-segment display with decimal points and a centre colon for clock display...
