All Products
Showing 7921-7940 of 8665 products · 2506 unavailable products hidden
Tall 2x20 Female GPIO Header (PTH, 0.1in)
·
This tall 2x20 female header is designed to extend the reach of boards using the standard 2x20 GPIO pin footprint, including Raspberry Pi, Google Coral and NVIDIA Jetson boards.It can also be soldered onto Pi HATs that do not already have headers fitted. Check that the HAT or board is only popula...
Tamiya Plug with 10cm Leads, Female
This style of high-current connector is commonly used with the 7.2V sub-C battery packs that power many RC cars. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected. This female Tamiya connector has 10cm 14-AWG leads...
Taoglas FXP895 Flexible PCB ISM/LoRa Antenna - 860-928MHz
·
The Taoglas FXP895 is a compact flexible PCB antenna for ISM and LoRa applications, designed to fit into small connected devices where space is tight.Its wideband 860 to 928MHz coverage suits regional ISM/LoRa frequency bands, helping one antenna design support multiple markets. The flexible PCB ...
Taoglas Steedan MA350 5-in-1 Magnetic Mount Antenna
·
The Taoglas Steedan MA350 is a low-profile 5-in-1 combination antenna designed for vehicle roofs, outdoor buildings and heavy equipment where drilling through a roof or metal panel is not feasible. Its magnetic base mounts to steel surfaces using ultra-strong neodymium magnets, while a soft foam ...
Tattu 1050mAh
Tattu 3S 11.1V 1050mAh 75C LiPo Battery (XT-60)The Tattu 3S 1050mAh LiPo battery is a compact powerhouse designed with Micro UAVs and high-performance RC applications in mind. With a discharge rate of 75C (and a burst rate of 150C), this pack delivers serious punch while keeping the weight down—j...
TB6600 arduino Stepper Motor Driver
The TB6600 is a professional stepper motor driver for two-phase stepping motors, compatible with Arduino and other microcontrollers that output 5V digital pulse signals. With a wide 9–42VDC power input and up to 4A peak current output, it handles most 42-type and 57-type stepper motors. Features...
TC01 Non-contact 16x4 Pixel Infrared Temperature Sensor
The TC01 is a non-contact infrared temperature sensor with a 16×4 pixel array, producing a 64-pixel thermal image. Housed in a waterproof, dustproof metal enclosure (IP65), it communicates via RS485 using the standard Modbus-RTU industrial protocol for easy integration with industrial controllers...
TCA9548A I2C Multiplexer
The TCA9548A 1-to-8 I2C multiplexer solves the common problem of needing multiple I2C devices with the same address on a single bus. It acts as a gatekeeper, routing I2C traffic to any of its eight downstream channels on command. Simply write a single byte to the multiplexer's I2C address (defau...
T-Connector For Silicone Tubing - 5 Pack
These T-shaped barbed connectors allow you to split or combine silicone tubing runs into three-way junctions. Each port has an outer diameter of approximately 4 mm, designed to fit snugly with 3 mm ID silicone tubing for a secure seal. Key Features T-Junction Design – Three-way barbed connecto...
TCR2EF33 Fixed 3.3V 200mA Voltage Regulator
·
This compact CMOS regulator provides a fixed 3.3V single output for low-current electronics projects and embedded hardware. It is rated for up to 200mA output current and is intended for surface-mount designs.The regulator includes an on/off control input, making it suitable for circuits that nee...
TCS3200 RGB Color Sensor For Arduino
An RGB colour sensor breakout board based on the TAOS TCS3200 chip, with four built-in white LEDs for illumination. The TCS3200 can detect and measure a wide range of visible colours by converting light intensity to a frequency output that can be read directly by a microcontroller. The sensor co...
TCS3430/TCS34303 Ambient Tri-Stimulus Colour Sensor
·
This breakout brings ambient light tri-stimulus colour sensing to your project using CIE XYZ plus an IR channel, rather than the more common RGB-style approach. It is designed for applications where you want access to the raw sensor count data so you can match and calibrate it to your own colour ...
TCS34725 RGB Color Sensor For Arduino
The TCS34725 is an I2C RGB colour sensor that detects the red, green, and blue components of light in its environment and returns digital colour values. With high sensitivity, a wide dynamic range, and a built-in IR blocking filter, it delivers accurate colour readings under varied lighting condi...
Techspray Solder Wick #2 Yellow 1.4mm x 1.524m
·
This Techspray solder wick is a pre-fluxed copper desoldering braid for removing solder from PCB joints, pads and accidental solder bridges. It is a handy bench consumable for component replacement, PCB rework, repair and prototyping.To use it, place the wick over the solder joint and apply your ...
Teensy 3.x Feather Adapter
The Teensy 3.x Feather Adapter rearranges the pins of a Teensy 3.x board to match the Adafruit Feather form factor and pinout. This allows the Teensy to work with the full range of FeatherWing add-ons — motor drivers, GPS modules, LED matrices, OLEDs, and more. The adapter also includes a built-...
Teensy 4.0
Teensy 4.0: High Performance in a Compact Form The Teensy 4.0 is a powerful, compact development board measuring just 1.4" × 0.7". It features the blazing-fast 600 MHz ARM Cortex-M7 processor, built on the NXP iMXRT1062 chip — currently the fastest microcontroller available. Maintaining the same ...
Teensy 4.0
The Teensy 4.0 is a high-performance microcontroller development board powered by the NXP iMXRT1062 ARM Cortex-M7 processor running at 600 MHz. Despite its compact 35.6 × 17.8 mm (1.4 × 0.7") form factor — the same size as the Teensy 3.2 — it delivers exceptional processing power with a dual-issu...
Teensy 4.0 (Headers)
Teensy 4.0 features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, the fastest microcontroller available today. Teensy 4.0 is the same size and shape as Teensy 3.2, and retains compatibility with most of the pin functions on Teensy 3.2. The best part of this version of Teensy 4....
Teensy 4.0 Lockable Development Board
·
This lockable Teensy 4.0 is a compact, very fast development board built around the NXP MIMXRT1062DVL6B ARM Cortex-M7 microcontroller. It runs at 600 MHz and keeps the familiar Teensy footprint and breadboard-friendly layout, making it suitable for demanding embedded, audio, control and connected...
Teensy 4.1
The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, four times larger flash memory than the 4.0, and two new locations to optionally add more memory. The Teensy 4.1 is the same si...
