All Products
Showing 641-660 of 8668 products · 2534 unavailable products hidden
3xAAA Battery Holder
3 x AAA Battery Holder with On/Off Switch and 2-Pin JST
3 x AAA Battery Holder with On/Off Switch, JST, and Belt Clip
3 x AAA Battery Holder with Switch
3xAA Battery Holder
3x AA Battery Holder with On/Off Switch and 2-Pin JST
3 x AA Battery Holder with On/Off Switch, JST, and Belt Clip
400-Point Breadboard
400 Tie Point Interlocking Solderless Breadboard
400 TIE POINT INTERLOCKING SOLDERLESS BREADBOARD - Crystal
4015 3-Phase BLDC Motor with AS5600 Encoder
MPN: FIT1036
40kg.cm Metal Serial Bus Servo, High Precision And Large Torque, With Programmable 360 Degrees Magnetic Encoder and Brushless Motor
40-pin 0.5mm FFC / FPC Extender
40-Pin 0.5mm FPC Connector - SMD, Dual-Sided Contacts
MPN: PRT-15095
40-pin 0.5mm pitch FPC Flex Cable with A-B Connections - 25cm long
40 pin 15CM Jumper wire F/F
40 pin 15CM Jumper wire M/F
40 pin 15CM Jumper wire M/M
40 pin 30CM Jumper wire F/F
40 pin 30CM Jumper wire F/M
3xAAA Battery Holder
This battery holder connects 3× AAA batteries in series, providing approximately 4.5V from alkaline cells. It features a PH2.0-2P connector, making it compatible with DFRobot boards and other devices that use the PH2.0 power interface, including the Maqueen robot car. Key Features 3× AAA Serie...
3 x AAA Battery Holder with On/Off Switch and 2-Pin JST
A slim 3×AAA battery holder with a built-in on/off switch and JST 2-pin connector. The series configuration outputs approximately 3.6–4.5V — a similar range to lithium-ion batteries — making it an ideal non-rechargeable alternative for 3.3V projects that use a JST battery connector. Uses a genui...
3 x AAA Battery Holder with On/Off Switch, JST, and Belt Clip
A slim 3×AAA battery holder with a built-in on/off switch, JST 2-pin connector, and an ergonomic belt clip. The series configuration outputs approximately 3.6–4.5V — a similar range to lithium-ion batteries — making it an ideal non-rechargeable alternative for 3.3V projects that use a JST battery...
3 x AAA Battery Holder with Switch
An enclosed battery holder for three AAA cells with a built-in on/off switch. The snap-on lid fully covers the batteries, keeping them secure during use. Wire leads allow you to connect directly to your project. Three AAA cells in series provide approximately 4.5V (alkaline) or 3.6V (NiMH), suit...
3xAA Battery Holder
This enclosed battery holder takes 3× AA batteries in series, providing approximately 4.5V from alkaline cells or 3.6V from NiMH/NiCd rechargeables. It features a built-in on/off switch and a sliding, removable cover for easy battery access. Compatible with both non-rechargeable alkaline and rec...
3x AA Battery Holder with On/Off Switch and 2-Pin JST
This compact battery holder connects 3× AA batteries in series, providing 3.3–4.5V output — a similar range to lithium-ion/polymer batteries. It features a built-in on/off switch and a genuine JST-PH 2-pin connector with a 6" cable, making it a convenient drop-in power source for 3.3V projects wi...
3 x AA Battery Holder with On/Off Switch, JST, and Belt Clip
A compact 3×AA battery holder with a built-in on/off switch, JST 2-pin connector, and an ergonomic belt clip. The series configuration outputs approximately 3.6–4.5V — a similar range to lithium-ion batteries — making it an ideal non-rechargeable alternative for 3.3V projects that use a JST batte...
400-Point Breadboard
A 400-point solderless breadboard for prototyping electronic circuits. Features 30 rows of tie points with four bus lines spanning the full length of the board, providing enough space for up to four 14-pin DIP ICs or three 16-pin DIP ICs. Rows and columns are clearly labelled for easy reference,...
400 Tie Point Interlocking Solderless Breadboard
A compact 400 tie-point solderless breadboard with interlocking edges and self-adhesive backing. The half-size form factor (82 × 62mm) makes it ideal for small projects, and the removable power rails let you slim it down to just 35mm wide for fitting onto Arduino protoshields. Multiple boards ca...
400 TIE POINT INTERLOCKING SOLDERLESS BREADBOARD - Crystal
A compact 400 tie-point solderless breadboard in a crystal-clear transparent finish, with interlocking edges and self-adhesive backing. The half-size form factor (82 × 62mm) makes it ideal for small projects, and the removable power rails let you slim it down to just 35mm wide for fitting onto Ar...
4015 3-Phase BLDC Motor with AS5600 Encoder
·
This compact 4015 BLDC motor combines a high-torque outer rotor motor with a factory-integrated AS5600 magnetic encoder, making it a neat motion-control package for robotics and precision motion projects.It is designed for Field-Oriented Control (FOC), also known as vector control, to support smo...
40kg.cm Metal Serial Bus Servo, High Precision And Large Torque, With Programmable 360 Degrees Magnetic Encoder and Brushless Motor
The Waveshare ST3025 is a high-performance metal serial bus servo featuring a brushless motor, steel gearbox, and 360° programmable magnetic encoder. With up to 40 kg·cm of torque at 12V, it is built for demanding robotics applications requiring precise position and speed control. Controllable v...
40-pin 0.5mm FFC / FPC Extender
A simple 40-pin FFC/FPC extender that connects two 0.5mm pitch flexible flat cables end-to-end, extending the total cable length. Ideal for reaching between components that are further apart than a single cable allows. The extender uses two ZIF (zero insertion force) connectors. Carefully pry th...
40-Pin 0.5mm FPC Connector - SMD, Dual-Sided Contacts
·
This 40-pin surface-mount FPC (Flat Printed Circuit) connector is a compact board-level connector for flexible flat cables and display tails. Its contacts are arranged so the cable can be inserted with the contacts facing either up or down, giving you more flexibility when laying out or assemblin...
40-pin 0.5mm pitch FPC Flex Cable with A-B Connections - 25cm long
A 25cm flexible flat cable (FFC) with 40 pins at 0.5mm pitch and Type A-B connections (contacts on opposite sides at each end). Designed for use with 40-pin FPC-to-IDC adapter PCBs to extend Raspberry Pi GPIO connections or other 40-pin ribbon cable applications. Pair this cable with compatible ...
40 pin 15CM Jumper wire F/F
A 40-pin ribbon of female-to-female (F/F) jumper wires, 15cm long, in ten rainbow colours (4 wires per colour). The wires fit standard 0.1″ (2.54mm) pitch headers and can be kept as a ribbon for neat harnesses or separated into individual jumpers. Key Features Female-to-Female (F/F) – 0.1″ fem...
40 pin 15CM Jumper wire M/F
A 40-pin ribbon of male-to-female (M/F) jumper wires, 15cm long, in ten rainbow colours (4 wires per colour). The wires fit standard 0.1″ (2.54mm) pitch headers and can be kept as a ribbon for neat harnesses or separated into individual jumpers. Key Features Male-to-Female (M/F) – 0.1″ male pi...
40 pin 15CM Jumper wire M/M
A 40-pin ribbon of male-to-male (M/M) jumper wires, 15cm long, in ten rainbow colours. The wires fit standard 0.1″ (2.54mm) pitch headers and can be kept as a ribbon for neat harnesses or separated into individual jumpers. Key Features Male-to-Male (M/M) – 0.1″ male header pins on both ends 4...
40 pin 30CM Jumper wire F/F
A 40-pin ribbon of female-to-female (F/F) jumper wires, 30cm long, in ten rainbow colours. The wires fit standard 0.1″ (2.54mm) pitch headers and can be kept as a ribbon for neat harnesses or separated into individual jumpers. Key Features Female-to-Female (F/F) – 0.1″ female header contacts o...
40 pin 30CM Jumper wire F/M
A 40-pin ribbon of female-to-male (F/M) jumper wires, 30cm long, in ten rainbow colours. The wires fit standard 0.1″ (2.54mm) pitch headers and can be kept as a ribbon for neat harnesses or separated into individual jumpers. Key Features Female-to-Male (F/M) – 0.1″ female header on one end, ma...
