All Products

SKU: SF-COM-24838 · MPN: COM-24838

This APA102C, also known as DotStar, is a 5050-sized SMD addressable RGB LED for adding bright, colourful lighting to custom boards and compact projects.It has an integrated control circuit embedded inside the LED package, with the tiny controller chip and gold bond wires visible if you look clos...

SKU: SF-COM-25269 · MPN: COM-25269

The APA-104-1010 is a tiny addressable RGB SMD LED for designs where full-colour control needs to fit into very little board space. Each LED uses a standard one-wire data interface with data in and data out connections.At just 1.0 x 1.0mm square, these microscopic LEDs are suited to dense layouts...

SKU: AF-6461 · MPN: ADA6461

This compact breakout combines RGB colour sensing, true lux light measurement and infrared proximity detection in one I2C device. With library code running on your microcontroller, it can read red, green, blue and clear light levels, as well as detect how much IR light is reflected from an object...

SKU: AF-415

EL tape is the flat, wide cousin of EL wire — same glowing effect but in a 1cm-wide strip format. The glowing surface is 1cm wide (plastic coating is about 1.5cm), with adhesive on the back for easy mounting. Covered in a PVC-like material for weather resistance, though the connectors are not ful...

SKU: AF-476

This 30mm translucent blue arcade button features a crystal-clear glossy finish and smooth button action. A pre-installed micro-switch with gold-plated contacts provides a satisfying press with tactile feedback — no strong click, just a clean, definite feel. Shorter than standard cheap arcade bu...

SKU: AF-471

This 30mm translucent clear arcade button features a crystal-clear glossy finish and smooth button action. A pre-installed micro-switch with gold-plated contacts provides a satisfying press with tactile feedback — no strong click, just a clean, definite feel. Shorter than standard cheap arcade b...

SKU: AF-475

This 30mm translucent green arcade button features a crystal-clear glossy finish and smooth button action. A pre-installed micro-switch with gold-plated contacts provides a satisfying press with tactile feedback — no strong click, just a clean, definite feel. Shorter than standard cheap arcade b...

SKU: AF-473

This 30mm translucent red arcade button features a crystal-clear glossy finish and smooth button action. A pre-installed micro-switch with gold-plated contacts provides a satisfying press with tactile feedback — no strong click, just a clean, definite feel. Shorter than standard cheap arcade but...

SKU: AF-3835

These quick-connect wire pairs make wiring arcade buttons and micro switches fast and simple. Each wire comes as a pair with two 0.187" quick-connect terminals pre-crimped, terminated together in a JST 2.5mm 2-pin connector that's breadboard compatible (fits 0.1" headers). Compatible with massiv...

SKU: AF-3838

These quick-connect wire pairs make wiring arcade buttons and micro switches fast and simple. Each wire comes as a pair with two 0.25" quick-connect terminals pre-crimped, terminated together in a JST 2.5mm 2-pin connector that's breadboard compatible (fits 0.1" headers). The 0.25" size fits bot...

SKU: AF-1152

These quick-connect wire pairs make wiring arcade-style and metal buttons fast and simple. Each wire comes as a pair with two 0.11" quick-connect terminals pre-crimped onto 20cm long wires, terminated together in a JST 2.5mm 2-pin connector that's breadboard compatible (fits 0.1" headers). The 0...

SKU: AF-3490

This 30mm translucent blue arcade button has built-in LEDs for a beautiful illuminated look. Two surface-mount LEDs with resistors are embedded in the button body, ready to light up from a microcontroller pin or direct 5V power at just 10mA draw. The button screws into place through material up ...

SKU: AF-3491

This 30mm translucent clear arcade button has built-in LEDs for a beautiful illuminated look. Two surface-mount LEDs with resistors are embedded in the button body, ready to light up from a microcontroller pin or direct 5V power at just 10mA draw. The button screws into place through material up...

SKU: AF-3487

This 30mm translucent green arcade button has built-in LEDs for a beautiful illuminated look. Two surface-mount LEDs with resistors are embedded in the button body, ready to light up from a microcontroller pin or direct 5V power at just 10mA draw. The button screws into place through material up...

SKU: AF-3489

This 30mm translucent red arcade button has built-in LEDs for a beautiful illuminated look. Two surface-mount LEDs with a ~1K resistor are embedded in the button body in a series configuration, drawing just 5mA from a 5V supply. The button screws into place through material up to ~20mm thick, co...

SKU: AF-3488

This 30mm translucent yellow arcade button has built-in LEDs for a beautiful illuminated look. Two surface-mount LEDs with a ~1K resistor are embedded in the button body in a series configuration, drawing just 5mA from a 5V supply. The button screws into place through material up to ~15mm thick,...

SKU: SF-COM-09182

This short-handle arcade joystick is a heavy-duty 4-way input in the classic Pac-Man style. Built from ABS plastic and solid alloy, it delivers a great feel with rugged construction that stands up to intense gameplay. Spring return centres the stick automatically after each movement. Key Feature...

SKU: SF-DEV-18440

The Arducam 5MP Plus OV5642 Mini is an SPI-enabled camera module designed for low-cost microcontrollers like Arduino and RP2040. With 5MP resolution and a generous 8MB frame buffer, it supports JPEG compression, multiple capture modes, and RAW/YUV/RGB output formats — all controllable via SPI for...

SKU: SF-SEN-21276

The Arducam 64MP Autofocus Camera Module brings smartphone-grade imaging to the Raspberry Pi ecosystem. With a 64MP sensor capable of capturing 9152 × 6944 still images and autofocus for sharp results, this module fits the standard Raspberry Pi camera form factor and connects via MIPI CSI-2 ribbo...

SKU: SF-SEN-19512

The Arducam Camera Module V3 delivers 16MP autofocus imaging for Raspberry Pi projects, powered by the Sony IMX519 sensor. With twice the resolution of the V2 camera module, it's an affordable yet high-performance option for computer vision, time-lapse photography, and video streaming. The stand...