All Products
Showing 6921-6940 of 8651 products · 2516 unavailable products hidden
Serial Wifi Module- USR232
Serial WIFI Transceiver Module ESP8266
Servo Driver Module for Raspberry Pi Pico, 16-ch Outputs, 16-bit Resolution
Servo Expansion for Onion Omega2
Servo extension cable 150mm
Servo extension cable 300mm
Servo Extension Cable - 30cm / 12 long -
Servo Extension Cable - 50cm / 19.5 long
Servo extension cable 600mm (23.62)
Servo - Generic, 180° Rotation (Sub-Micro Size)
MPN: ROB-24052
Servo - Generic Continuous Rotation (Micro Size)
Servo - Generic High Torque Continuous Rotation (Standard Size)
Servo - Generic High Torque (Standard Size)
Servo - Generic Metal Gear (Micro Size)
Servo - Generic (Sub-Micro Size)
Servo - Hitec HS-422 (Standard Size)
Servo - Hitec HS-85MG (Micro Size)
Servo Tester and Speed Controler Power
Servo to Alligator Clip Cable - Shrouded
Servo to Pigtail Cable - Shrouded
Serial Wifi Module- USR232
This Serial WiFi module is you best choice for you to connect your application to the internet. It is a complete ultra low power embedded TCP/IP solution. It is a standalone, embedded wireless 802.11b/g networking module. It incorporates a 2.4GHz radio, processor, TCP/IP stack, power management t...
Serial WIFI Transceiver Module ESP8266
This serial WiFi transceiver module is based on ESP8266 SoC.. ESP8266 is a highly integrated chip that has Integrated TCP/IP protocol stack. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions f...
Servo Driver Module for Raspberry Pi Pico, 16-ch Outputs, 16-bit Resolution
Servo Driver Module For Pico Ideal For Controlling Robotic Arm Or Hexapod Walker Features At A Glance Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards Up to 16-Channel servo/PWM outputs, 16-bit resolution for each channel Integrates 5V regulator, up to 3A output ...
Servo Expansion for Onion Omega2
Add 16 independent PWM outputs to your Onion Omega2 for controlling servos, DC motors, and LED brightness. The onboard 3-pin connectors let you plug in standard servos directly – no breadboard or extra wiring needed. The built-in oscillator generates free-running PWM signals from 24Hz to 1526Hz....
Servo extension cable 150mm
A 150mm servo extension cable for reaching servos mounted further from the controller than the servo's built-in lead allows. Male connector plugs into the controller, female connector mates with the servo. Also works as a standard 0.1" jumper cable for general prototyping. Specifications Lengt...
Servo extension cable 300mm
A 300 mm (11.8″) servo extension cable for when your servo needs to reach further than its built-in lead allows. Male connector on one end plugs into your controller, female connector mates with the servo. Also works as a simple 0.1″ pitch jumper cable. Specifications Length – 300 mm (11.8″) ...
Servo Extension Cable - 30cm / 12 long -
Stretch out your servo connections with this flexible servo extension cord. It has a 3 pin shrouded "male" connection to plug your servo into and then, 30cm later, a 3 pin female connection. It even keeps the common red/black/white color coding. A great add-on to our 16 channel PWM/Servo drive...
Servo Extension Cable - 50cm / 19.5 long
A 50 cm (19.5″) servo extension cable for extending the reach of standard 3-pin servo connections. It features a shrouded male connector on one end and a female connector on the other, with red/black/white colour coding maintained throughout. Specifications Connector – 3-pin servo (male to fem...
Servo extension cable 600mm (23.62)
This is a 600mm (23.62") servo extension cable. This comes in very handy when your servo is further away from the controller than the wire on the servo allows. Male connector on one end goes to controller, female connector mates with servo. Fits all Hitec, Futaba, JR, Multiplex, and Airtronics...
Servo - Generic, 180° Rotation (Sub-Micro Size)
· MPN: ROB-24052
Here is a simple, low-cost servo for all your mechatronic needs. This little guy is able to take in 6 volts and deliver 1.5kg/cm (at 6V). of maximum torque at 0.09 sec/60° (at 6V). This small servo comes with a standard 3 pin power and control cable, six arms and six screws. Note: This is the s...
Servo - Generic Continuous Rotation (Micro Size)
Here, for all your mechatronic needs, is a simple, high quality continuous rotation servo motor. This servo is able to take in 6 volts and deliver 30.6 oz-in. of maximum torque at 0.14 sec/60° A standard 3-pin power and control cable is attached and all hardware listed below is included. Featu...
Servo - Generic High Torque Continuous Rotation (Standard Size)
Here, for all your mechatronic needs, is a simple, high quality continuous continuous rotation servo motor. This servo is able to take in 6 volts and deliver 66.7 oz-in. of maximum torque at 70 r/min. A standard 3-pin power and control cable is attached and all hardware listed below is included...
Servo - Generic High Torque (Standard Size)
A reliable, high-torque standard-size servo (FS5106B) with dual ball bearings and nylon gears. Delivering up to 83.47 oz-in of torque at 6V with a speed of 0.16 sec/60°, it's a versatile choice for robotics, RC, and mechatronics projects. Features a standard 3-pin power and control cable with 18...
Servo - Generic Metal Gear (Micro Size)
Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is able to take in 6 volts and deliver 44.4 oz-in. of maximum torque at 0.18 sec/60° This is a small servo with a standard 3 pin power and control cable (red = power, brown = ground, and yellow = data), and...
Servo - Generic (Sub-Micro Size)
Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is very similar in size and specifications to the Hitec HS-55. This little guy is able to take in 6 volts and deliver 20.8 oz-in. of maximum torque at 0.10 sec/60° This small servo comes with a standard 3 ...
Servo - Hitec HS-422 (Standard Size)
This is the classic Hitec HS-422 servo. This solid consumer grade servo is able to take in 6 volts and deliver 57 oz-in. of maximum torque at 0.16 sec/60°, this is a simple servo for any beginner project!This high quality servo is perfect for your mechatronic needs and if you are looking to get i...
Servo - Hitec HS-85MG (Micro Size)
The Hitec HS-85MG packs impressive torque into a micro-sized package. With metal gears and a single ball bearing, this servo delivers up to 3.4 kg·cm (48.6 oz·in) of torque at 6V while weighing just 21.9 g — making it an excellent choice for compact robotics, RC models, and mechatronic projects. ...
Servo Tester and Speed Controler Power
The servo tester and controller can be used as a signal generator for electronic speed controllers. If you are looking for a low-cost way to get a servo up and running without any programming, you can plug directly into the servo tester. There are 3 modes that can be use:...
Servo to Alligator Clip Cable - Shrouded
This is a servo adapter cable that allows you to hookup your servo directly to alligator clip connections. On one end you have a shrouded male servo connector, and on the other end three 30mm shrouded alligator clips. Alligator clips are a staple item for any workbench or maker space, and with th...
Servo to Pigtail Cable - Shrouded
A servo adapter cable with a shrouded male servo connector on one end and three individual breadboard-compatible pigtail wires on the other. Makes it easy to connect a servo to a breadboard, development board, or any standard hookup wire connection. Specifications Connector – Shrouded male ser...
