All Products

SKU: AF-5930 · MPN: ADA5930

A PCIe flex cable (PCIe Pipe) for connecting the Pimoroni NVMe Base to a Raspberry Pi 5. The cable features a keyed design with 16 pads at the Raspberry Pi 5 end and 18 pins at the NVMe Base end, preventing incorrect installation. Key Features Keyed Connector – One-way design prevents incorrec...

SKU: AF-5931 · MPN: ADA5931

This PCIe Flex Cable gives you a variety of options for connecting and placing your Pimoroni NVMe Base with Raspberry Pi 5. They have a 'one way' design with 16 pads at the Raspberry Pi 5 end and 18 pins at the NVMe Base end to prevent incorrect installation. The designed is set up for PCIe Gen 3...

SKU: PH-EP-0219

The P02 PCIe slot baseboard for Raspberry Pi 5 is designed to convert the Raspberry Pi 5's PCIe into a PCIe x1 slot. This accessory broadens Raspberry Pi's capabilities by enabling the connection of PCIe devices, providing a versatile solution for expanding your projects, structurally compatible...

SKU: WS-27541

  PCIe To Gigabit Ethernet And USB 3.2 Gen1 HAT For Raspberry Pi 5, 3x USB 3.2 Gen1, 1x Gigabit Ethernet, Driver-Free, Plug And Play, Raspberry Pi 5 PCIe HATExtends 1x Gigabit Ethernet Port Equipped With RTL8153B High-Performance Gigabit ETH Chip, Sinking Design Of Network Port, Neat And Be...

SKU: EC-RPI08239D

This SSD expansion board is specifically designed for the Raspberry Pi 5, featuring PCIe and M.2 M-key interfaces that enable the use of high-speed M.2 NVMe solid-state drives. This setup enhances storage performance and data transfer speeds on the Raspberry Pi 5. The expansion board supports boo...

SKU: DF-FIT0972 · MPN: FIT0972

##Introduction This is a PCIex1 to PCIex16 adapter board specially prepared for LattePanda Sigma users. It has a PCIex16 card slot. No driver installation is required, just plug and play. It can be used with the M.2 M Key to PCIex4 expansion card to connect multiple external graphics cards or PCI...

SKU: AF-1331

Keep it cool with a Peltier module. These unique electronic components can generate a temperature differential when powered. That is to say, apply 5V to the red (positive) and black (negative) wires and one side will get cold while the other side gets hot. For best results, you'll need to wick aw...

SKU: AF-1335

This is for people who just want to get cold fast. The 12V Peltier module is mounted onto a 12V heatsink and fan assembly with thermal paste and an aluminum clamp. Simply connect to 12V 5A+ power supply and you will see frost appear on the aluminum plate within a minute. This assembly comes with ...

SKU: AF-1150

Move fluid safely from here to there with this very nice little pump. Unlike most liquid pumps, this is a peristaltic type - the pump squishes the silicone tubing that contains the liquid instead of impelling it directly. The upshot? The pump never touches the fluid which makes this an excelle...

SKU: DF-FIT0627

What do you do if you find that the line length is not enough when you do a project with Boson Kit? Or you find out the interface of Boson module is not matched with the Arduino IO expansion shield when you want to connect them together.This PH2.0 3Pin cable will solve your problem.SPECIFICATION ...

SKU: DF-FIT0902 · MPN: FIT0902

This 3-pin PH2.0 male-to-male cable pack provides compact, tidy connections for modular electronics builds. It is designed for use with Boson modules and the UNIHIKER development board, helping you connect sensors, peripherals and expansion modules without soldering.Each cable has keyed PH2.0 3-p...

SKU: DF-FIT0924 · MPN: FIT0924

This compact PH2.0-4P cable is a short female-to-female lead for linking modular electronics hardware without messy excess wiring. It is designed for tidy connections between sensors, actuators and controller boards in close-spaced builds.Each end has a keyed PH2.0-4P female connector to help pre...

SKU: DF-FIT0915 · MPN: FIT0915

This pack of cables is designed for linking sensors, expansion boards and controllers in modular electronics projects. Each cable has 4-pin polarised PH2.0 male connectors on both ends, making them suitable for Boson, UNIHIKER and other PH2.0-based systems.Connector type: PH2.0 4-pin male to male...

SKU: DF-FIT0914 · MPN: FIT0914

A 10-pack of PH2.0-4P male-to-male cables for connecting Boson modules, UNIHIKER boards, and other modular electronics. The polarised 4-pin connectors ensure correct orientation and prevent reverse insertion. Key Features Polarised Connectors – Prevents incorrect insertion 4-Pin PH2.0 – Male ...

SKU: DF-FIT0947 · MPN: FIT0947

##Introduction This is a PHB2.0 interface power cable specifically designed for the LattePanda Sigma - x86 Windows / Linux Single Board Computer Server.It has a length of 30cm and features clear color coding, making it easy for users to connect to the interface.Figure: Pinout ##Specification Inte...

SKU: SF-PRT-26991 · MPN: PRT-26991

This small machine screw is a handy fastener for electronics projects, enclosures, brackets and other light-duty assemblies that use 4-40 hardware.It has a Phillips drive and pan head, with a zinc-finished steel construction. Each screw is sold as a single unit, so you can order exactly the quant...

SKU: AF-2653

Get your Particle (formally known as Spark) Photon moving with a PhoBot Robotics shield. No, this is not a robot that makes you a delicious bowl of Vietnamese soup.  Instead, it's a board from Simon Monk that's kind of like a Motorshield for your Spark Core or Particle Photon th...

SKU: AF-161

CdS cells are little light sensors. As the squiggly face is exposed to more light, the resistance goes down. When its light, the resistance is about 5-10KΩ, when dark it goes up to 200KΩ. To use, connect one side of the photo cell (either one, its symmetric) to power (for example 5V) and the o...

SKU: SF-SEN-09299

The GP1A57HRJ00F is a slotted optical sensor (photo interrupter) with an infrared emitter on one upright and a shielded infrared detector on the other. When an object passes through the 10 mm gap between the uprights, it breaks the IR beam and the detector registers the interruption. Key Feature...

SKU: SF-PRT-14321

A standard 1×12 female header designed for the Particle Photon and Photon ProtoShield boards. Add reliable, stackable connectivity to your next Photon project with this 0.1" (2.54mm) pitch header. While designed for the Photon ecosystem, this header works anywhere you need a standard 12-pin fema...